Operation Manual

Loading Documents in the ADF (Auto Document Feeder)
Note
• For best results, load documents on the platen glass.
1. Remove any originals left on the platen glass.
2.
Open the document tray.
3.
Insert the document in the document tray until the machine beeps.
Load documents face-UP in the document tray.
Supported Originals
Note
• No tone is played if you have silenced beeping in Device user settings > Sound control.
Device user settings
4.
Adjust the document guides (A) to match the width of the document.
Do not set the document guides too firmly against the document, which may cause feeding problems.
186