Operation Manual

A. Tap to activate/deactivate automatic intensity adjustment.
When ON is selected, the intensity is adjusted automatically according to the originals loaded on
the platen glass.
B.
Drag to specify the intensity.
C.
Tap to confirm the intensity setting.
Note
• When Auto is selected, load the original on the platen glass. You cannot use the ADF.
3.
Page size
Select the page size of the loaded paper.
Note
• Only the page sizes selectable from the operation panel are displayed.
4.
Type (Media type)
Select the media type of the loaded paper.
Note
• Only the media types selectable from the operation panel are displayed.
5.
Paper src (Paper source)
Select the cassette to feed paper.
Selecting Cassette (auto) allows the printer to feed paper from the cassette 2 when the cassette 1 runs
out of paper under the following conditions.
•
A4, Letter, or Legal sized plain paper is loaded in the cassette 1 and cassette 2.
•
Yes is selected for Auto feed switch in Cassette settings.
6. Print qlty (Print quality)
Adjust print quality according to the original.
Important
•
If you use Standard with Type set to Plain paper and the quality is not as good as expected,
select High for Print qlty and try copying again.
556