MB2100 series (PDF) User Manual (Mac)

If a network password (WEP) has not been set, the WEP Details screen is displayed
automatically. To change WEP settings set before, click Configuration... to display the
screen.
Changing WEP Detailed Settings
Use WPA/WPA2
Transmission is encrypted using a network key you specified.
The security has been strengthened more than WEP.
If a network key has not been set, the Authentication Type Confirmation screen is
displayed automatically. To change network key settings before, click Configuration... to
display the WPA/WPA2 Details screen.
Changing WPA or WPA2 Detailed Settings
5.
Configuration...
The detailed settings screen is displayed. The network password (WEP) or the WPA/WPA2 key
selected in Encryption Method: can be confirmed and changed.
For more on WEP setting:
Changing WEP Detailed Settings
For more on WPA/WPA2 setting:
Changing WPA or WPA2 Detailed Settings
6.
TCP/IP Setting:
Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your
network environment.
Get IP address automatically
Select this option to use an IP address automatically assigned by a DHCP server. DHCP
server functionality must be enabled on your wireless router.
Use following IP address
Select this option if no DHCP server functionality is available in your setup where you use the
printer, or you want to use a fixed IP address.
Wireless Routers Screen
362