Operation Manual

2500
Cause
The cause of following may have occurred the failure of Automatic Print Head Alignment.
• Print head nozzles are clogged.
• The paper of size other than A4 or Letter is loaded.
• The paper output slot is exposed to strong light.
Action
Press the machine's OK button to dismiss the error, then take the actions described below.
• Print the nozzle check pattern to check the status of the print head.
• Load one sheet of A4/Letter-sized plain paper and perform Automatic Print Head Alignment again.
• Adjust your operating environment and/or the position of the machine so that the paper output slot is
not exposed directly to strong light.
After carrying out the above measures, if the problem continues after aligning the print head again, press
the machine's OK button to dismiss the error, and then perform Manual Print Head Alignment.
1046