Operation Manual

Reset setting
Important
• This setting item is for the administrator.
Reverts all settings you made to the machine back to the default. However, some data may not be changed,
depending on the current usage state of your machine.
Important
• Depending on the setting item, it is necessary to perform connection or setup again after you have
reverted the setting back to the default.
• Web service setup only
Reverts the Web service settings back to the default.
• LAN settings only
Reverts the LAN settings other than the administrator password back to the default.
After resetting, perform setup again as necessary.
• Telephone number only
Reverts the telephone/fax number settings to default.
• Settings only
Reverts the settings such as the paper size, media type, or other setting items back to the default. The
LAN settings and the telephone/fax number are not reverted.
• Device info sending setting only
Reverts only the device information sending settings.
• FAX settings only
Reverts the fax settings to the default. Disconnect the telephone line from the machine before you revert
this setting item.
After resetting, perform setup again as necessary.
• Reset all
Reverts all settings you made to the machine back to the default. The administrator password specified
for the machine reverts to the default setting.
After resetting, perform setup again as necessary.
Note
• You cannot change the following setting items back to the default:
• The language displayed on the LCD
• The current position of the print head
• The country or region selected for Country or region
• Total use of copying, scanning, and faxing recorded in Records of use
You can delete the registered user's name or telephone number following the procedure below.
265