LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS

LV-7575 Expand Serial Command Functional Specifications
21/71
8.4.11 CF_IMAGE Command
Command “CF_IMAGE_%1” [CR]
%1
“STANDPC” --------- Standard (PC)
(Image adjust value is set to factory default for Still Image)
“STANDAV” --------- Standard (AV)
(Image adjust value is set to factory default for Moving Image)
“REAL------------ High contrast (Fixed value to display graphic image with natural
tone)
“CINEMA”------- Cinema (Fixed value to focus on tone reproduction for movie)
“CUSTOM1” ------------- Image1 （the value adjusted and stored by user）
“CUSTOM2” ------------- Image2 （the value adjusted and stored by user）
“CUSTOM3” ------------- Image3 （the value adjusted and stored by user）
“CUSTOM4” ------------- Image4 （the value adjusted and stored by user）
“CUSTOM5” ------------- Image5 （the value adjusted and stored by user）
“CUSTOM6” ------------- Image6 （the value adjusted and stored by user）
“CUSTOM7” ------------- Image7 （the value adjusted and stored by user）
“CUSTOM8” ------------- Image8 （the value adjusted and stored by user）
“CUSTOM9” ------------- Image9 （the value adjusted and stored by user）
“CUSTOM10” ----------- Image10 （the value adjusted and stored by user）
Details
Select Image Mode (Available only in the normal Power ON status)
Parameter “CUSTOM1” to “CUSTOM10” corresponds to “Image1” to “Image10”
displayed in projector OSD menu on selecting Image.
The value set by this command is stored in EEPROM so that the setting can
remain effective even after the power is turned to ALL OFF status.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.4.12 CF_IMAGEADJ Command
Command “CF_IMAGEADJ_%1”[CR]
%1
“RST”------ Reset adjusted value for the Image
“STR1”---- Store current adjusted value to Image 1
“STR2”---- Store current adjusted value to Image 2
“STR3”---- Store current adjusted value to Image 3
“STR4”---- Store current adjusted value to Image 4
“STR5”---- Store current adjusted value to Image 5
“STR6”---- Store current adjusted value to Image 6
“STR7”---- Store current adjusted value to Image 7
“STR8”---- Store current adjusted value to Image 8
“STR9”---- Store current adjusted value to Image 9
“STR10”---- Store current adjusted value to Image 10
Details
Reset or Store adjusted value for Image.
(Available only in the normal Power ON status)
“STR1”-”STR10” corresponds to “Image1”-”Image10” displayed in projector OSD
menu on selecting “Store” for adjusted value of Image. The setting value set in
“Image1” to “Image10” is stored and can be retrieved when turning on the
projector again after the power is turned to ALL OFF status.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]