LV-8320_Expanded_Serial_Commands_v1.0-(YT1-1441)

LV-8320 Expand Serial Command Functional Specifications
-55-
9.7.8 CR_SYSTEM Command
Command “CR_SYSTEM”[CR]
Details Get selected System
Response
Acceptable “000_%1”[CR]
%1
Input is
PC Analog
“VGA1” -------------- VGA1 is selected
“VGA2” -------------- VGA2 is selected
：
“XGA1”-------------- XGA1 is selected
：
“WXGA3” --------- WXGA3 is selected
“1080i” ------------ 1080i is selected
“1035i” ------------ 1035i is selected
“720p” ------------- 720p is selected
“575p” ------------- 575p is selected
“480p” ------------- 480p is selected
“575i” -------------- 575i is selected
“480i” -------------- 480i is selected
“MODE1” ------- Mode1 is selected
：
“MODE10” -------------- Mode10 is selected
When there is no signal, projector returns error code”101”
[CR]
Input is
HDMI
“D−XGA1” ------------- D-XGA1 is selected
：
“D−WXGA3” ---------- D-WXGA3 is selected
“D−1080I” ------------- D-1080i is selected
“D−1035I” ------------- D-1035i is selected
“D−720P” ------------- D-720p is selected
“D−575P” ------------- D-575p is selected
“D−480P” ------------- D-480p is selected
When there is no signal, projector returns error code”101”
[CR]
Input is
Y,Pb/Cb,Pr
/Cr
“AUTO” ----------- Auto is selected
“1080i” ------------1080i is selected
“1035i” ------------ 1035i is selected
“720p” ------------- 720p is selected
“575p” ------------- 575p is selected
“480p” ------------- 480p is selected
“575i” -------------- 575i is selected
“480i” -------------- 480i is selected
Projector returns selected System status regardless of the
signal input.
Input is
Video,
S-Video
“AUTO” --------------- Auto is selected
“NTSC” --------------- NTSC is selected
“NTSC443” ---------- NTSC4.43 is selected
“PAL” ------------------ PAL is selected
“SECAM” ------------- SECAM is selected
“PAL−M” ------------- PAL-M is selected
“PAL−N” ------------- AL-N is selected
Projector returns selected System status regardless of the
signal input.
Unacceptable ““Error Code”[CR]