LV-8320_Expanded_Serial_Commands_v1.0-(YT1-1441)

LV-8320 Expand Serial Command Functional Specifications
-23-
8.6.8 CF_INPUT_%1_%2 Command
Command “CF_INPUT_%1_%2”[CR]
%1
“COMPUTER1” ------ Select Computer1 Input
“COMPUTER2” ------ Select Computer2 Input
“HDMI” ------------------ Select HDMI Input
“VIDEO” ---------------- Select Analog Input
“S-VIDEO” ------------- Select S-video Input
%2
When %1 is COMPUTER1
“ANALOG” ----------Select Analog RGB Input
“YPBPR” ------------- Select Component
“SCART” ------------- Select SCART
When %1 is COMPUTER2
“ANALOG” ---------- Select Analog RGB Input
When %1 is HDMI
“HDMI” ---------- Select HDMI Input
When %1 is VIDEO
“VIDEO” ------------ Select Video Input
When %1 is S-VIDEO
“S-VIDEO” ------------ Select S-video Input
Details
Select Input specified by %1 and also Source specified by %2 at once
This command is available in normal Power ON status.
Projector returns “101” by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]