User Manual

LV-8235 UST Expand Serial Command Functional Specifications
-20-
8.5.7 CF_PCMODEFREE Command
Command “CF_PCMODEFREE_%1”[CR]
%1
“MODE1” ------ Set Mode1 to Free status
“MODE2” ------ Set Mode2 to Free status
“MODE3” ------ Set Mode3 to Free status
“MODE4” ------ Set Mode4 to Free status
“MODE5” ------ Set Mode5 to Free status
“MODE6” ------ Set Mode6 to Free status
“MODE7” ------ Set Mode7 to Free status
“MODE8” ------ Set Mode8 to Free status
“MODE9” ------ Set Mode9 to Free status
“MODE10” ---- Set Mode10 to Free status
Details
Delete the registered data in Mode1-Mode5 and turns it to Free status.
This command operates the same as turning Mode1-Mode5 to Free in PC Adjust
Menu.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6 Input Control Command
8.6.1 CF_INPUT Command
Command “CF_INPUT_%1”[CR]
%1
“CONPUTER1” ----- Select Computer1 Input
“COMPUTER2” ----- Select Computer2 Input
“HDMI” ----------------- Select HDMI Input
“VIDEO” --------------- Select Video Input
“S-VIDEO” ------------ Select S-video
“UP” ----------------------- The same operation as pressing Up key or Left key
“DN” ---------------------- The same operation as pressing Down key or Right key
Details
Select Input
The same operation as “INPUT” button of the projector and Remote Control.
This command is available in normal Power ON status.
Projector returns “101” by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Response
Acceptable “000”[CR]
Unacceptable “Error code”[CR]