LV7555_Expand_command_specification

MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
8.10.4 CF_CEIL COMMAND
COMMAND
“CF_CEIL_%1”[CR]
%1
“ON”------ Select Ceiling
“OFF”---- Cancel Ceiling
Details
Set/Cancel Ceiling (Only valid when it is in the usual Power On state.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable “000”[CR]
Response
Unacceptable “Error Code”[CR]
8.10.5 CF_REAR COMMAND
COMMAND
“CF_REAR_%1”[CR]
%1
“ON”------ Select Rear
“OFF”---- Cancel Rear
Details
Set/Cancel Rear (Only valid when it is in the usual Power On state.)
When Rear is ON, it will be a mirror-reversed image.
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable “000”[CR]
Response
Unacceptable “Error Code”[CR]
8.10.6 CF_RCODE COMMAND
COMMAND
“CF_RCODE_%1”[CR]
%1
“001”------Select Code1
“002”------Select Code2
Details
Select a remote control code.(Only valid when it is in the usual Power On
state.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable “000”[CR]
Response
Unacceptable “Error Code”[CR]
Page 33 / 53