LV-8225

Chapter 3 Basic Setting and Operation

2 Registering and deleting E-mail addresses

Enter the e-mail address onto "Add e-mail

address" and click Set button.

To check the registered addresses, click

Check/Delete sub menu tab. The address-

es are listed as the figure on the right.

✐ Up to 10 E-mail addresses can be registered.

To delete the registered addresses, check the

address you want to delete and click Delete

button.

Check / Delete

✐ If the projector sends an alert message due to the abnormality on the projector but the SMTP

server is down in some other reason, the message will not be sent. In this case, the message

"Unable to connect to server." will be displayed on the setting page. To clear this message, set up

SMTP server address again.

✐ To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.

✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net-

work environment.

✐ The projector does not send message to the address set in "Administrator address" text box. If

you want to send e-mails to the administrator address, enter the administrator address into "Add

address" text box.

1 Setting SMTP server and administrator address

Enter the server name or IP address of the

SMTP server*

, the port number of the

SMTP server and administrator address and

click Set button. The administrator address

is set to "Reply-To" address of the message

sent from the projector.

*1 The SMTP server is a server for sending e-mail. Please contact your network administrator to

have this SMTP server address.