User's Manual

2. Installation and Connections

NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.

NOTE:Animagemaynotbedisplayedcorrectlywhena VideoorS-Videosourceisplayedback viaacommerciallyavailable

scan converter.

This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.

* Whenanimageisdisplayedwiththelowerandupperblackportionofthescreenoradarkimageisnotdisplayedcorrectly:

ProjectanimagetollthescreenandthenpresstheAUTOPCbuttonontheremotecontrolortheprojectorcabinet.