Basic_Serial_Command_Codes

Basic Serial Command Functional Specification Page 10 of 19
6.24. Menu On Command
Command “C1C” [CR]
Detail Display Menu of On Screen Display.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.25. Menu Off Command
Command “C1D” [CR]
Detail Clear Menu of On Screen Display.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.26. Display Clear Command
Command “C1E” [CR]
Detail
Clear the On Screen Display.
Clear the On screen Display unconditionally.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.27. Brightness + Command
Command “C20” [CR]
Detail Brightness of user control +1.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.28. Brightness - Command
Command “C21” [CR]
Detail Brightness of user control –1.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.29. Computer 2 Component Command
Command “C24” [CR]
Detail
Select Component input for Computer 2.
However, when Computer 2 terminal is set to Monitor Out, acceptable command is
returned, but does not execute command.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.30. Computer 2 RGB Command
Command “C25” [CR]
Detail
Select RGB input for Computer 2.
However, when Computer 2 terminal is set to Monitor Out, acceptable command is
returned, but does not execute command.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]