Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 21 of 41
8.8.2. CF_FLSCREN Command
Command “CF_FLSCREN_%1” [CR]
%1
“ON” ------------- Select Full Screen
“OFF” ------------ Cancel Full Screen
PC Input
Set / Cancel Full Screen.
(Only valid when it is in the usual Power On status)
The value set by this Command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will
return to the original setting. (Stay in Standby mode)
Details
Video Input Unvalid
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.8.3. CF_TRUE Command
Command “CF_TRUE_%1” [CR]
%1
“ON” ---------- Select True mode
“OFF” --------- Cancel True mode
Details
Set / Cancel True mode
Only valid when it is in the usual Power On state and Input is Computer.
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ------ Input is Video
8.8.4. CF_DZCENT Command
Command “CF_DZCENT_%1” [CR]
%1 “CENT” ---------- Cancel Digital Zoom (CENT: “CENTER”)
Details
Cancel Digital Zoom.
Only valid when it is in the usual Power On state and Input is Computer.
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ------ Input is Video
8.8.5. CF_KEYSTONE Command
Command “CF_KEYSTONE_%1” [CR]
%1
“UP” ----------- Make the screen image length at the top edge shorter with small
range.
“FUP” --------- Make the screen image length at the top edge shorter with large
range.
“DN” ---------- Make the screen image length at the bottom edge shorter with
small range.
“FDN” -------- Make the screen image length at the bottom edge shorter with
large range.
“LEFT” -------- Make the screen image length at the left edge shorter with small
range.
“FLFT” ------- Make the screen image length at the left edge shorter with large
range.
“RIGHT” ---- Make the screen image length at the right edge shorter with
small range.
“F RGT ” ------ Make the screen image length at the right edge shorter with
large range.
“RST” --------- Keystone off
Details
Change Keystone range. (Only valid when it is in the usual Power On status）
Acceptable “000” [CR]
Response
Unacceptable
“Error Code” [CR]
“201” [CR] ---- When Keystone value is maximum or minimum.