Expanded_Serial_Command_Codes

Expand Serial Command Functional Specification Page 20 of 41
8.7.4. CF_SYSTEM Command
Command “CF_SYSTEM_%1” [CR]
PC Input
“MODE1” ------------- Select Mode 1
“MODE2” ------------- Select Mode 2
“MODE3” ------------- Select Mode 3
“MODE4” ------------- Select Mode 4
“MODE5” ------------- Select Mode 5
%1
Video Input
“AUTO” ------------ Select Auto System
“NTSC” ------------- Select NTSC
“NTSC443” -------- Select NTSC4.43
“PAL” --------------- Select PAL
“SECAM” ---------- Select SECAM
“PAL-M” ------------ Select PAL-M
“PAL-N” ------------ Select PAL-N
“1080I” -------------- Select 1080i
“1035I” -------------- Select 1035i
“720P” --------------- Select 720p
“575P” --------------- Select 575p
“480P” --------------- Select 480p
“575I” ---------------- Select 575i
“480I” ---------------- Select 480i
Details
Select System for current Input mode.
(Only valid when it is in the usual Power On status)
When Input does not meet the requirement for specified %1, the response will be
“101” and the Command does not execute.
Note1) “NTSC” / “NTSC4.43” / “PAL” / “SECAM” / “PAL-M” / “PAL-N” is available
only when Input Video or S-Video.
Note2) “1080I” / “1035I” / “720p” / “575P” / “480P” / “575I” / “480I” is available
only when Input is Y, Pb/Cb, Pr/Cr.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.8. Screen Control Command
8.8.1. CF_SCREEN Command
Command “CF_SCREEN_%1” [CR]
PC Input
“NORMAL” ----------------- Select Normal (4:3)
“WIDE” ------------------- Select Wide (16:9)
“TRUE” ---------------------- Select True
“DZOOM_UP” -------------- Up to Digital Zoom
“DZOOM_DN” -------------- Down to Digital Zoom
%1
Video Input
“NORMAL” --------------- Select Normal (4:3)
“WIDE” ------------------- Select Wide (16:9)
Details
Select Screen size. (Only valid when it is in the usual Power On status)
When Input does not meet the requirement for the specified %1, the response will
be “101” [CR], and the Command is not executed.
Note) “WIDE” / “NORMAL” dose valid when Input signal is only 4:3.
Unvalid 16:9 signal.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]