lv7210_series_exp_cmd
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
9.5.8 CR_PC STORECOMMAND
COMMAND “CR_PCSTORE” [CR]
Details
Get the status if MODE1-MODE5 is Free or Stored for PC Adjust.
Each data MODE1-MODE5 will be shown in 5 bytes.
（F:Free, S:Stored）
Acceptable “000_%a” [CR]
Required
Data
“FFFFF”--- All Free
“SFFFF”--- Only MODE1 is Stored, and others are Free
:
“FFFFS”--- Only MODE5 is Stored, and others are Free
“SSSSS”--- All Stored
Response
Unacceptable “?” [CR]
9.5.9 CR_SET PC ADJ COMMAND
COMMAND “CR_SETPCADJ” [CR]
Details Get PC signal for current system
Acceptable “000_%1” [CR]
%1
“XGA1”
“HDTV1080”
“MODE1””-- “MODE5” ...Etc.
Response
Unacceptable “?” [CR]
9.6 VIDEO COMMAND
9.6.1 CR_SERSYSCOMMAND
COMMAND “CR_SERSYS” [CR]
Details
Select selected. signal.
When AUTO MODE, it returns by AUTO-detect.
Only available when Input-VIDEO. (Unavailable when Input is
COMPUTER.)
Acceptable “000_%a” [CR]
% a
“1080I60”-- 1080i 60Hz
“1080I50”-- 1080i 50Hz
“1035I”------ 1035i
“720P”-------- 720p
“575P”-------- 575p
“480P”-------- 480p
“575I”-------- 575i（include composite signal such as PAL）
“480I”-------- 480i（include composite signal such as NTSC）
“NOSIGNAL”--- When No Signal
Response
Unacceptable
“101” [CR] -- When Input is PC series
“?” [CR]
Page 38