lv7210_series_exp_cmd

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.11 Setting COMMAND
8.11.1 CF_BBACK COMMAND
COMMAND “CF_BBACK_%1” [CR]
%1
“ON”------ Select Blue Back
“OFF”---- Cancel Blue Back
Details
Set/cancel Blue Back. (Only valid when it is in the usual Power ON status.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.11.2 CF_DISPCOMMAND
COMMAND “CF_DISP_%1” [CR]
%1
“ON”------ Select Display
“OFF”----Cancel Display
Details
Set/Cancel Display. (Only valid when it is in the usual Power ON status.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.11.3 CF_LOGOCOMMAND
COMMAND “CF_LOGO_%1” [CR]
%1
“OFF”.................... Cancel Logo
“DEFAULT”.... Set Default Logo Display
“ＵＳＥＲ”................ Set Captured Logo Display
Details
Set/Cancel Logo. (Only valid when it is in the usual Power ON status.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.11.4 CF_CEILCOMMAND
COMMAND “CF_CEIL_%1” [CR]
%1
“ON”------ Select Ceiling
“OFF”---- Cancel Ceiling
Details
Set/Cancel Ceiling (Only valid when it is in the usual Power ON status.)
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
Page 28