lv7210_series_exp_cmd

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.8 Screen Control COMMAND
8.8.1 CF_SCREENCOMMAND
COMMAND “CF_SCREEN_%1” [CR]
Input is
COMPUTER
“NORMAL”............Select 4:3
“WIDE”.................... Select 16:9
“TRUE”.................... Select TRUE
“DZOOM_UP”.... Zoom Out with DIGITAL zoom
“DZOOM□DN”-- Zoom in with DIGITAL zoom
%1
Input is
VIDEO
“NORMAL” ---- Select 4:3
“WIDE” -------- Select 16:9 screen
Details
Select screen size.（Only valid when it is in the usual Power ON status.）
When Input does not meet the requirement for the specified %1, the response
will be “101” [CR], and the Command is not executed.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.8.2 CF_FLSCRENCOMMAND
COMMAND “CF_FLSCREN_%1” [CR]
%1
“ON”------ Select Full Screen
“OFF”---- Cancel Full Screen
Input is
COMPUTER
Set/Cancel Full Screen. (Only valid when it is in the usual
Power ON status.)
The value set by this Command will not be saved to the
projector.
Therefore, when ALL OFF the projector, the value will
return to the original setting. (stay in STANDBYMODE.)
(stays in STANDBYMODE.)
Details
Input-VIDEO
series
Invalid
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.8.3 CF_TRUECOMMAND
COMMAND “CF_TRUE_%1” [CR]
%1
“ON”------ Select True
“OFF”---- Cancel True
Details
T Set/Cancel True
Only valid when it is in the usual Power On state and input is COMPUTER.
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ........ Input-VIDEO
Page 25