lv7210_series_exp_cmd

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
8.7 Input Control COMMAND
8.7.1 CF_INPUT COMMAND
COMMAND “CF_INPUT_%1” [CR]
%1
“COMPUTER1”........ Select COMPUTER 1 input
“COMPUTER2”........ COMPUTER 2 input
“VIDEO”........................ VIDEO input
Details
Select Input.(Only valid when it is in the usual Power ON status.)
The Command works as the same as the remote controls’s unit “INPUT”
button.
Note1:) If trying to select Input-2 TERMINAL when setting
Input-2(COMPUTER)to MONITOR Out, the projector returns “101”.
Note2:)The selection of Input-1 is not COMPUTER-1 but Memory card/
Wireless/Network when Option box is installed to Input-1 (COMPUTER1).
Acceptable “000” [CR]
Response
Unacceptable “%%%” [CR]
8.7.2 CF_SOURCECOMMAND
COMMAND “CF_SOURCE_%1” [CR]
Input=1
“DIGITAL”…………Select DVI input
“ANALOG”............ .Select ANALOG input 0
“HDCP”....................Select DVI HDCP input
Input=2
“ANALOG”............Select RGB
“YPBPR”................Select Component VIDEO input
“SCART”................ Select Scart input
%1
Input=3
“AUTO”..................Select VIDEO Auto MODE
“VIDEO”................ Select Composite VIDEO input
“S-VIDEO”......…… Select S-VIDEO input
Details
Select current input source.
(Only valid when it is in the usual Power ON status.)
When selected Input and specified %1 are not matched, the projector
returns”101” and does not execute the command.
Note) When the option, MCI BOX is installed to Input-1 (COMPUTER1),
selection for source is invalid. error code “101”
Acceptable “000” [CR]
Response
Unacceptable “%%%” [CR]
Page 23