lv7210_series_exp_cmd

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.5.8 CF_PC STORECOMMAND
COMMAND “CF_PCSTORE_%1” [CR]
%1
“MODE1” --- Store current PC Adjust status to MODE 1
“MODE2” ...Store current PC Adjust status to MODE 2
“MODE3” ...Store current PC Adjust status to MODE 3
“MODE4” ...Store current PC Adjust status to MODE 4
“MODE5” ...Store current PC Adjust status to MODE 5
Details
Store current PC Adjust status (each parameter status such as Total dots) to
MODE1-5.
This command operates the same operation as storing to MODE1-MODE5 in
PC Adjust Menu.
（Only valid when it is in the usual Power ON status.)
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
8.5.9 CF_PC MODE FREECOMMAND
COMMAND “CF_PCMODEFREE_%1” [CR]
%1
“MODE1” …reset MODE 1 to Free
“MODE2” …reset MODE 2 o Free
“MODE3” …reset MODE 3 o Free
“MODE4” …reset MODE 4 to Free
“MODE5” …reset MODE 5 to Free
Details
Reset MODE 1, 2, 3, 4, and 5 to Free.
This command works as the same when resetting Modes in PC adjust menu.
(Only valid when it is in the usual Power ON status.)
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
8.6 VIDEO Control COMMAND
8.6.1 CF_AVDDOTS COMMAND
COMMAND “CF_AVDDOTS_%1” [CR]
%1
“UP”...........Current setting value +1
“DN”............Current setting value -1
Details
Set AV Service MODE Horizontal Resolution.
(Only valid when it is in the usual Power ON status.)
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there e is no signal, the projector returns “101” [CR].
Acceptable “000” [CR]
Response
Unacceptable “101” [CR] ----Input-VIDEO
Page 21