lv7210_series_exp_cmd

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
6.6 Lamp Status Read Command Table
Status read command Item
CR_LAMPREPL [CR] Get information for lamp replacement time.
CR_LAMPMODE [CR] Get lamp MODE status
CR_PROJH [CR] Get projector total running time.
6.7 Sound Status Read Command Table
Status read command Item
CR_VOLUME [CR] Get Volume value
CR_MUTE [CR] Get sound mute setting value
6.8 Setting Status Read Command Table
Status read command Item
CR_BBACK [CR] Get Blue Back setting value
CR_DISP [CR] Get Display setting value
CR_LOGO [CR] Get Log setting value
CR_RCODE [CR] Get selected. remote Control code status
CR_LANG [CR] Get selected. language.
CR_ON-STA [CR] Get ON Start setting status
CR_P-MANE [CR] Get Power management setting status
CR_P-MANETIME [CR] Get the start time for Power management
CR_FANSPEED [CR] F Get selected. FAN CONTROL SPEED
CR_KEYDIS [CR]
Get ＲＣ/ＫＥＹ prohibit status.
CR_TERMINAL [CR] Get TERMINAL setting status.
CR_STANDBYMODE [CR] Get STANDBYMODE Setting Status.
CR_POINTER [CR] Get POINTER setting status.
6.9 Other Status Read Command Table
Status read command Item
CR_SIGNAL [CR] Get the status if there is signal or no signal
CR_VMUTE [CR] Get No Show setting status
CR_FREEZE [CR] Get Freeze Setting Status
CR_PTIMER [CR] Get Timer operational status
CR_TEMPWARN [CR] Get if sensors are exceeding critical temperature or not
CR_TEMPFAIL [CR]
Get the temperature when sensors approached critical
temperature
Page 12