Operation Manual
165
Saving and Sharing Your Recordings
1 Power the camcorder using the compact power adapter.
2 Press ] to set the camcorder to playback mode.
3 Select the USB connection type.
4 Connect the camcorder to the connect station using the sup-
plied USB cable.
•Connection 3-햲. Refer to Connection Diagrams (A 154).
• If a device selection screen appears, select [Connect Station].
• When the connection is correctly established, the transfer of files
will start automatically.
• You can check on the connect station when all the files have
been saved. Refer to the instruction manual of the CS100.
5 Disconnect the USB cable.
•The index screen will appear again on the camcorder’s screen.
e Memory Save: Saving an Entire
Memory onto an External Hard Drive
You can easily save all the movies and photos you recorded onto a
commercially available external hard drive connected directly to the
camcorder. You can also use the camcorder to play back your record-
ings directly from the hard drive.
0 > [1 Other Settings] > q > [USB Connection Type]
> [ Connect Station] or [ Connect and Set] > [X]