Operation Manual

Convenient Functions

2 Set the video quality.

• The video quality must be set to 24 Mbps or 17 Mbps for fast

motion recording, or 17 Mbps for slow motion recording.

3 Select the slow/fast motion rate.

* When you select a fast motion rate between [x10] and [x1200], you can

select the desired recording time with the following procedure before

touching [X].

• and the selected slow/fast motion rate will appear on the

screen.

• To turn off the slow & fast motion recording mode, repeat the

procedure selecting [Off] instead.

4 Press Y to start recording.

• While recording, a scene counter will appear and its dividers ( : )

will flash. Note that the higher the fast motion rate used, the more

slowly the scene counter will advance.

5 Press Y again to stop recording the time-lapse or

slow motion scene.

0 > [3 Recording Setup] > [Video Quality] > Desired

video quality > [K] > [X]

[2] > [ Slow & Fast Motion] > [Entire Scene] > Desired

slow/fast motion rate* > [X]