PUB.
Important Usage Instructions WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Trademark Acknowledgements • SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
• “Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels (scanning lines). • This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
About this Manual and Camcorder Thank you for purchasing the Canon LEGRIA HF R88 / LEGRIA HF R87 / LEGRIA HF R86 / LEGRIA HF R806. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting (A 245). Conventions Used in this Manual Important precautions related to the camcorder’s operation. Additional notes and topics that complement the basic operating procedures.
• Brackets [ ] are used to refer to onscreen controls you need to touch (menus, buttons, etc.) and to messages as they are displayed on the screen. • The photos included in this manual are simulated pictures taken with a still camera. Unless indicated otherwise, illustrations and menu icons refer to the g. • Illustrations of the camcorder’s screen or a computer’s screen included in this manual may show only relevant parts of the screen.
• Observe the following precautions while the camcorder’s ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory. - Do not open the memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder’s shooting mode. - Do not press the ^ button. - When a USB cable is connected to the camcorder, do not disconnect the USB cable.
Table of Contents Important Usage Instructions ................................................2 About this Manual and Camcorder .......................................4 The Camcorder’s Functions in Real-Life Situations ............12 Unique functions for special cases......................................12 Getting the look you want ...................................................13 Challenging subjects and shooting conditions.....................14 Playback, editing and others..........................
Basic Operation of the Camcorder......................................41 Using the Touch Screen .....................................................41 Using the Menus.................................................................42 Operating Modes................................................................48 Basic Recording and Playback .................................. 50 Basic Recording ..................................................................51 Recording Video ..........................
Programmed AE Mode: Adjusting Settings to Match Your Needs..............................................................93 Convenient Functions..........................................................94 Slow & Fast Motion Recording............................................94 Decoration: Adding a Personal Touch.................................99 Video Snapshot ................................................................107 Face Detection and Tracking ............................................
e Copying Recordings to a Memory Card ......140 Converting Movies to MP4 Format....................................143 e Converting Movies into Fast Motion Scenes .............................................................................147 External Connections................................................ 149 Terminals on the Camcorder .............................................150 Connection Diagrams .......................................................151 Playback on a TV Screen................
Additional Information............................................... 211 Appendix: Menu Options Lists ..........................................212 Appendix: Onscreen Icons and Displays...........................236 Trouble?.............................................................................245 Troubleshooting................................................................245 List of Messages...............................................................257 Do’s and Don’ts ........................
The Camcorder’s Functions in Real-Life Situations Unique functions for special cases Keep beautiful memories of baby’s most precious moments and use the specially designed stamps to keep track of baby’s growth. Baby Mode (A 86) 9 Shoot a cool time-lapse video or use slow motion to check your golf swing. Slow & Fast Motion Recording (A 94) Decorate movies with graphics and stamps. Decoration (A 99) Create a dynamic montage sequence with short cuts.
Record the best sound possible according to your shooting situation, such as when attending a speech or musical performance. Audio Scenes (A 121) Choose whether to record in AVCHD or MP4 format. Movie Format (A 80) Getting the look you want Let the camcorder select the best settings according to the shooting scene to get beautiful video and photos. N mode (A 57) Make the image brighter or darker than the exposure set by the camcorder.
Change how smooth or natural movement looks in your videos. Frame Rate (A 119) Give your recordings a professional cinematic look. Cinema Mode and Cinema-Look Filters (A 88) Cinema-look filter [FILTER 2] (Vivid) Challenging subjects and shooting conditions Shoot great video of special scene situations with minimal settings. Shooting Modes (A 84) Obtain natural-looking colors even under special lighting conditions.
Playback, editing and others Save parts of your video as image files or short video snapshot scenes. Grabbing Still Frames/Capturing Video Snapshot Scenes (A 126) Convert scenes into a smaller file size to upload to the Web. Converting Movies to MP4 Format (A 143) e Convert scenes into interesting time-lapse scenes. Converting Movies into Fast Motion Scenes (A 147) e Save all the recordings in a memory directly onto an external hard disk, even without a computer.
Save your recordings effortlessly on the optional CS100 Connect Station. CS100 Connect Station (A 164, 192) e Wireless functions Use your smartphone or tablet as a remote control while recording.
Use an app to wirelessly save recordings to your smartphone/ tablet and upload them to the Web. Camera Connect (A 190) Share your recordings with Web albums using CANON iMAGE GATEWAY. CANON iMAGE GATEWAY (A 195) Use the NFC function to effortlessly connect your camcorder to your NFC-enabled Android device. NFC (A 179, 185) Connect the camcorder to your home network and wirelessly stream your recordings.
Getting to Know the Camcorder Supplied Accessories The following accessories are supplied with the camcorder: CA-110E Compact Power Adapter (incl. power cord) BP-727 Battery Pack WA-H43 Wide Attachment (f only) IFC-300PCU/S USB Cable HTC-100/SS High Speed HDMI Cable Quick Guide* * This guide explains how to download PIXELA’s Transfer Utility LE software, which allows you to save AVCHD movies to a computer and to transfer music files to a memory card.
Names of Parts Left side view 1 5 2 3 4 6 7 1 2 ^ (playback mode) button (A 49) ON/OFF button 3 4 5 6 7 Memory card slot cover (A 31) Memory card slot (A 31) AV OUT terminal (A 150, 153)/× (headphones) terminal (A 122) HDMI OUT terminal (A 150, 151) USB terminal (A 150, 154) 19
Right side view 1 2 3 4 1 2 3 START/STOP button (A 51) DC IN terminal (A 25) Grip belt Adjust the grip belt so that you can reach the zoom lever with your index finger, and the Y button with your thumb. 4 Lens cover switch Move the lens cover switch down to lens cover.
Front view Top view 2 3 1 1 2 3 4 4 Stereo microphone (A 121, 234) e NFC (near field communication) touchpoint (A 181, 192) Speaker (A 69) Zoom lever (A 60) 21
Back view Bottom view 1 2 3 4 6 5 5 6 LCD touch screen (A 23, 41) ACCESS indicator (A 6, 51, 55) e Wi-Fi antenna (A 177) POWER/CHG (charge) indicator: Green - On; Red - Charging (A 25) Battery attachment unit (A 25) Serial number 7 8 Tripod socket (A 280) BATTERY RELEASE switch (A 26) 1 2 3 4 22 7 8
LCD touch screen 180° Open the LCD panel 90 degrees. By default, this will turn on the camcorder. The first time you open the LCD panel, the initial setup screens will appear and guide you through the basic settings (A 34). approx. 90° Adjust the position of the LCD panel according to the recording conditions. • The screen is produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.
Preparations Charging the Battery Pack 25 The first step for using your camcorder is to prepare the power supply. This section explains how to charge a battery pack. Using a Memory Card 30 This section explains the types of memory cards that can be used and how to insert one into the camcorder.
Charging the Battery Pack Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. 1 2 3 1 3 2 1 2 3 Connect the power cord to the compact power adapter. Plug the power cord into a power outlet. Connect the compact power adapter to the camcorder’s DC IN terminal.
Charging the Battery Pack 5 4 5 4 4 Attach the battery pack to the camcorder. • Press the battery pack softly into the battery attachment unit and slide it up until it clicks in place. 5 Charging will start when the camcorder is turned off. • If the camcorder was on, the green POWER/CHG indicator will go out when you turn off the camcorder. After a moment, the POWER/CHG indicator will turn on in red (battery pack charging).
Charging the Battery Pack 1 2 1 2 • Turn off the camcorder before connecting or disconnecting the compact power adapter. After turning off the camcorder, important data is updated in the memory. Be sure to wait until the green POWER/CHG indicator goes out. • Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder.
Charging the Battery Pack • If the ambient temperature or the battery pack’s temperature is low, charging may take longer than usual. • The battery pack will be charged only when the camcorder is off. • If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG indicator has gone out before restoring the power supply. • When the POWER/CHG indicator goes out, the approximate battery charge shown in 1 > q > [Battery Info] may not be at 100%.
Charging the Battery Pack • You can verify the battery charge status of the battery pack with the 1 > q > [Battery Info] setting. • We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.
Using a Memory Card Using a Memory Card Memory Cards Compatible for Use with the Camcorder You can use the following types of commercially available Secure Digital (SD) cards with this camcorder. We recommend using memory cards rated CLASS 4, 6 or 10*. As of December 2016, the movie recording function has been tested using SD/SDHC/SDXC cards made by Panasonic, Toshiba and SanDisk. Memory card type: SD Speed Class**: .
Using a Memory Card • About the Speed Class: Speed Class is a standard that indicates the minimum guaranteed data transfer speed of memory cards. When you buy a new memory card, look for the Speed Class logo on the package. ■ SDXC Cards You can use SDXC cards with this camcorder. When using SDXC cards with other devices, such as digital recorders, computers and card readers, make sure that the external device is compatible with SDXC cards.
Using a Memory Card 1 2 3 2 3 4 Top view (lens) SD card 1 Open the LCD panel. • The camcorder will turn on automatically. If this is the first time you turn on the camcorder, the language selection screen of the basic setup will appear. 2 Press [ to turn off the camcorder. • Make sure the POWER/CHG indicator is off. 3 4 Open the memory card slot cover. Insert the memory card at a slight angle, with the label facing toward the lens, all the way into the memory card slot until it clicks.
Using a Memory Card To remove the memory card Push the memory card once to release it. When the memory card springs out, pull it all the way out. • SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the memory card as described in step 4. • SD cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the card’s content.
First Time Settings First Time Settings Basic Setup The first time you turn on the camcorder, you will be guided by the camcorder’s basic setup screens to select the camcorder’s language, set the date and time, and select the movie format (AVCHD or MP4) and recording memory (e only). For details on how to use the touch screen, refer to Using the Touch Screen (A 41). 1 Open the LCD panel. • If this is the first time you turn on the camcorder, the language selection screen will appear.
First Time Settings • After you select the date format, the [Date/Time] screen will appear with the first field selected. 4 Touch a field you want to change (year, month, day, hours or minutes). 5 Touch [Í] or [Î] to change the field as necessary. 6 Set the correct date and time by changing all the fields in the same way. • Touch [24H] to use 24-hour clock or leave it unselected to use 12-hour clock (AM/PM). 7 Touch [OK] and then touch [æ].
First Time Settings 9 Touch [&] (built-in memory) or [8] (memory card) and then touch [æ]. • When selecting the memory, you can check the available recording time based on the default video quality setting. • After you select the memory where you want to record movies, the [{ Rec Media for Photos] screen will appear. 10 Touch [&] (built-in memory) or [8] (memory card) and then touch [æ].
First Time Settings • When you do not use the camcorder for about 3 months, the built-in rechargeable lithium battery may discharge completely and the date and time setting may be lost. In such case, recharge the built-in lithium battery (A 283). The next time you turn on the camcorder, you will have to perform the basic setup again. • You can change the 1 > q > [Power On Using LCD Panel] setting so that you can turn the camcorder on and off only by pressing [.
First Time Settings 2 Touch ["] to set the home time zone, or [#] to set the time zone of your destination when you are traveling. 3 Touch [Í] or [Î] to set the desired time zone. If necessary, touch [$] to adjust for daylight saving time. 4 Touch [X] to close the menu. Initializing the Memory Initialize memory cards when you use them with this camcorder for the first time. You can also initialize a memory card or the built-in memory (e only) to permanently delete all the recordings it contains.
First Time Settings 2 Initialize the memory. e 0 > [1 Other Settings] > q > [Initialize &/8] > [& Built-in Mem.] or [8 Mem. Card] > [Initialize] > [Complete Initialization]1 > [Yes]2 > [OK] > [X] d 0 > [1 Other Settings] > q > [Initialize 8] > [Initialize] > [Complete Initialization]1 > [Yes]2 > [OK] > [X] 1 2 Touch this option if you want to physically erase all the data rather than just clear the file allocation table of the memory.
First Time Settings • d About FlashAir cards: Initializing a FlashAir card with this camcorder will reset the card’s wireless settings (network names, SSID, passwords, etc.) to factory settings. We recommend formatting FlashAir cards on a computer, using the FlashAir configuration tools.
Basic Operation of the Camcorder Basic Operation of the Camcorder Using the Touch Screen The buttons and menu items that appear on the touch screen change dynamically depending on the operating mode and the task you are performing. With the intuitive touch screen interface you have all the controls at your fingertips. 1 2 1 Touch Touch on an element displayed on the touch screen. Used to start playing back a scene in an index screen, to select a setting from the menus, etc.
Basic Operation of the Camcorder • In the following cases, you may not be able to perform touch operations correctly. - Using your fingernails or hard-tipped objects, such as ballpoint pens. - Operating the touch screen with wet or gloved hands. - Applying excessive force with your finger. Using the Menus The 0 (Home) menu is the gateway to most of the camcorder’s functions and settings. In recording mode, the 0 (Home) menu offers immediate access to some frequently used functions.
Basic Operation of the Camcorder ■ 0 (Home) Menu Recording mode 1 2 Playback mode Touch [0] to open the 0 (Home) menu. Swipe left/right to bring the desired menu to the center. • You can also touch [Ï] or [Ð] to bring the icon of the desired menu to the center. 3 Touch the icon of the desired menu to open it. • See the following table for a description of each menu.
Basic Operation of the Camcorder Menu item Description [Shooting Mode]** (recording mode only) (A 84) The camcorder features a number of shooting modes that offer the most appropriate settings for a variety of special scenes. [2 Main Functions] (recording mode only) (A 231) This menu contains functions commonly used while recording, such as focus and exposure. The [2] button on the right side of the recording mode screen allows you to open this menu directly, without going through the 0 (Home) menu.
Basic Operation of the Camcorder Menu item Description [— Wi-Fi]* (playback mode only) (A 173) Allows you to access the various Wi-Fi functions, such as uploading recordings to the Web or saving recordings to a smartphone. * e only. **The icon shown in the 0 (Home) menu indicates the shooting mode currently selected.
Basic Operation of the Camcorder ■ Using the Menus Changing the camcorder’s various settings using the menus is very easy. You make your selection simply by touching the button of the desired option. When they appear on the screen, you can touch [K] to return to the previous screen or [X] to close the menu. In some screens, you will need to scroll to find the desired option. Some screens provide additional information about the options. In that case, simply swipe up and down along the column of icons.
Basic Operation of the Camcorder • You can also touch [Ï] or [Ð] to bring the icon of the desired menu to the center. 3 2 4 5 3 4 Touch the tab of the desired menu. Swipe up/down to bring the setting you want to change into the orange selection bar. • You can also touch [Í] or [Î] to scroll up/down the menu. • Menu items not available appear grayed out. • You can touch any menu item on the screen to bring it directly into the selection bar.
Basic Operation of the Camcorder Operating Modes In this manual, the camcorder’s operating modes are indicated with a bar of icons. A full icon in blue (N) indicates that the function described can be used in that particular operating mode; a grayed-out icon (}) indicates the function is not available in that operating mode. Icons are divided into movie format, shooting modes and playback modes. Format Shooting Fmode 9 N Playback † ƒ ’ y } Movie Format Refers to AVCHD or MP4 recordings.
Basic Operation of the Camcorder Playback Press ] to switch the camcorder between recording mode and playback mode. In the Playback area of the operating modes bar, the y icon refers to playing back movies (A 66), whether from the [y] index screen (all scenes), the [9] index screen (only scenes recorded in 9 (Baby) mode) or the [¦] index screen (only video snapshot scenes recorded in AVCHD format). The } icon refers to viewing photos from the [}] index screen (A 72).
Basic Recording and Playback Basic Recording 51 This section covers how to easily record video and photos and explains the convenient N mode. To record using other shooting modes, use more advanced functions and enjoy full access to all menu settings, refer to Advanced Recording Functions (A 79). Basic Playback 66 This section covers how to play back and delete movies and photos.
Basic Recording Basic Recording Recording Video You are now ready to record movies. Format Shooting Fmode 9 N Playback † ƒ ’ y } • Before you begin recording, make a test recording first to check that the camcorder is operating correctly. 1 3 1 1 3 1 2 3 3 2 Open the LCD panel to turn on the camcorder. • You can also press [. • e By default, movies are recorded in the built-in memory. You can select the memory that will be used to record movies (A 82).
Basic Recording • By default, the camcorder’s shooting mode is set to N (A 57). You can select a different shooting mode according to the shooting conditions (A 84). 2 3 Slide the lens cover switch down. Press Y to begin recording. • Press Y again to stop recording. The scene will be recorded to the memory. • The ACCESS indicator will flash from time to time while the scene is being recorded. When you have finished recording 1 2 Make sure that the ACCESS indicator is off.
Basic Recording • If 1 > q > [Auto Power Off] is set to [i On], the camcorder will shut off automatically to save power when it is powered by a battery pack and is left without any operation for 3 minutes. Should this happen, turn the camcorder off and then on again. • When recording in bright places, it may be difficult to use the LCD screen.
Basic Recording ■ The Info Panel In the info panel you can check some recording settings, such as the memory used for recording (e only), the remaining recording time available on the memory or the currently selected movie format.
Basic Recording Taking Photos You can easily take photos with the camcorder. You can even take photos simultaneously while recording movies. Format Shooting Fmode 9 N Playback † ƒ ’ y } 3 1 2 3 1 1 1 2 Open the LCD panel to turn on the camcorder. • You can also press [. • e By default, photos are recorded in the built-in memory. You can select the memory that will be used to record photos (A 82). • By default, the camcorder’s shooting mode is set to N (A 57).
Basic Recording 2 3 Slide the lens cover switch down. Touch [{] to take a photo. • A green icon ( ) and { Ð & (e only) or { Ð 8 will appear momentarily on the screen and the ACCESS indicator will flash as the photo is recorded. However, if you record a photo while recording a movie, will not appear. When you have finished taking photos Turn off the camcorder and close the lens cover (A 52).
Basic Recording AUTO Mode When the shooting mode is set to N, the following automatic functions will be activated so you can enjoy shooting video and photos letting the camcorder take care of choosing the optimal settings. • Smart AUTO (A 57): The camcorder will automatically detect the scene and subject and apply the most appropriate settings. • Intelligent IS (A 59): The camcorder will select the best image stabilization (IS) mode for the shooting conditions.
Basic Recording • Under certain conditions, the Smart AUTO icon that appears on the screen may not match the actual scene. Especially when shooting against orange or blue backgrounds, the Sunset or one of the Blue Skies icons may appear and the colors may not look natural. In such case, we recommend recording in ’ mode (A 93). • There are times when the Smart AUTO function cannot detect the scene, for example when you touch a subject on the screen (tracking).
Basic Recording Background Subject Sunset Dark Dark + Spotlight People (stationary) — — People (moving) — — Dark + Night Scene Subjects other than people, such as landscapes Close objects — / — — ■ Intelligent IS Intelligent IS allows the camcorder to select the best image stabilization option based on your shooting method. When the shooting mode is set to N or 9, the Intelligent IS icon will change to one of the following icons.
Basic Recording Icon Shooting conditions  (Macro IS) Close-up of a subject à (tripod mode) When using a tripod * You can use the 1 > p > [Intelligent IS] setting to change whether Powered IS is available when Intelligent IS is activated. Zooming Use the zoom lever on the camcorder to zoom in and out. You can change the zoom speed with the 1 > p > [Zoom Speed] setting (A 215).
Basic Recording • Keep at least 1 m away from the subject. At full wide angle, you can focus on a subject as close as 1 cm. Using tele macro (A 120), you can focus on a subject as close as 50 cm at full telephoto. • When 1 > p > [Zoom Speed] is set to [Y Variable], the zoom speed will be faster in recording standby mode than when actually recording, except when pre-recording (A 233) is activated.
Basic Recording ■ Framing Assistance Sometimes, while zooming in on a very far subject (large zoom ratio), you might momentarily “lose” the subject as it moves out of the frame. In this case, you can use the framing assistance function to temporarily zoom out a little and make it easier to find the subject. You can select either automatic or manual framing assistance. Automatic Framing Assistance 1 Select the automatic mode in advance.
Basic Recording • When you stop moving the camcorder, it will zoom in on the area indicated by the white frame. 1 2 3 Manual Framing Assistance 1 Select the manual mode in advance. 0 > [1 Other Settings] > p > [Framing Assistance] > [l Manual] > [X] 2 3 Zoom in on the desired subject. If you lose the subject, touch and hold [ momentarily. ] to zoom out • The original zoom position is indicated by a white frame. 4 Reframe the shot so the desired subject is within the white frame.
Basic Recording 5 When the desired subject is correctly framed, release [ ]. • The camcorder will zoom in on the area indicated by the white frame. 1 2 3 • You can select the initial size of the framing assistance white frame with the 1 > p > [Framing Assistance Area] setting. • Operating the zoom lever while the camcorder is zooming in or out during automatic framing assistance will stop the automatic zoom operation.
Basic Recording ■ f Using the Supplied WA-H43 Wide Attachment You can attach the supplied WA-H43 Wide Attachment to the camcorder to reduce the focal length and achieve a wider angle of view. When using the wide attachment, perform the following procedure to optimize the camcorder’s settings. Alignment index 1 Place the wide attachment on the lens making sure the alignment index is facing up. 2 While lightly pressing on the wide attachment, turn it clockwise.
Basic Playback Basic Playback Playing Back Video Format Shooting Fmode 9 N Playback † ƒ ’ y } Index screen button (A 68) 1 1 Press ] to display the playback index screen. • You can press ] repeatedly to switch back and forth between recording mode and playback mode. • You can press ] when the camcorder is off to turn it on directly in playback mode. • The index screen that appears will depend on the recording mode that was used previously.
Basic Playback • To open the [¦] index screen (only video snapshot scenes recorded in AVCHD format) or the [9] index screen (Baby album with only scenes recorded in 9 mode): 0>[ Video Snapshot] or [9 Baby Album] • When the index screen button appears on the screen, you can also select the memory selected for playback (e only) and the format of the scenes displayed (A 68). • Swipe left/right (2a) or touch [Ï] or [Ð] (2b) to display the previous/next index screen.
Basic Playback 3 Touch the desired scene to play it back. • The camcorder will play back the scene selected and continue until the end of the last scene in the index screen. • Touch the screen to display the playback controls. During playback, the playback controls will disappear automatically after a few seconds without operation.
Basic Playback d From the [y] index screen: Touch the index screen button > Movie format (· or ¸) > [OK] To adjust the volume 1 During playback, touch the screen to display the playback controls. 2 Touch [Ý], touch [Ø] or [Ù] to adjust the volume, and touch [K]. Playback controls Playback Playback pause 1 2 3 4 10 11 5 1 2 3 67 8 9 12 Stop the playback. Jump to the beginning of the scene. Double-tap to jump to the previous scene. Pause the playback.
Basic Playback Display the volume (A 69) and background music mix balance (A 129) controls. 5 Decoration (A 99). 6 AVCHD scenes only: Capture a video snapshot scene (A 126). 7 Fast playback* backward/forward. 8 AVCHD scenes: Recording date and time. MP4 scenes: Recording date. 9 Jump to the beginning of the next scene. 10 Resume the playback. 11 Grab the displayed frame and save it as an image file (A 126). 12 Slow playback** backward/forward.
Basic Playback • You can use the 1 > t > [Display Date/Time] setting to choose whether to display the recording date (MP4 scenes) or date and time (AVCHD scenes and photos) during playback. • In the [y] index screen for MP4 scenes, you can touch [I] and then touch a scene to display details about the scene, such as the scene’s video quality, length and recording date and time. Touch [K] twice to return to the index screen.
Basic Playback • When playing back scenes recorded in mode on the camcorder, we recommend setting 1 > q > [ View Assistance] to [i On]. Viewing Photos Format Shooting Fmode Playback 9 N † ƒ ’ y } Index screen button (A 68) 1 1 2 Press ]. Open the [}] index screen. 0 > [} Photo Playback] • e If necessary, change the memory selected for playback (A 68).
Basic Playback Visual bar shows the relative location of the current index screen. [Edit] button (A 235): To delete photos, etc. You can also lock it (A 70) to protect your recordings. 3 3a 3a 3b 3b Folder name. The last four digits represent the recording date (1103 = November 3). Look for the photo you want to view. • Swipe left/right (3a) or touch [Ï] or [Ð] (3b) to display the previous/next index screen. 4 Touch the photo you want to view. • The photo is displayed in single photo view.
Basic Playback Playback controls 1 3 2 1 2 3 Slideshow (A 134). Return to the [}] index screen. Photo jump Touch [Ï] or [Ð], or swipe left/right along the scroll bar to find the desired photo. Touch [K] to return to single photo view. • The following image files may not be displayed correctly with this camcorder if they were recorded on or copied onto a memory card using another device. - Images not recorded with this camcorder. - Images edited on a computer. - Images whose file names have been changed.
Basic Playback Deleting Scenes and Photos You can delete recordings that you are not interested in keeping. Deleting recordings allows you also to free up space on the memory. You can use the lock files function to disable the editing functions and prevent inadvertently deleting your recordings (A 70). ■ Deleting Scenes or Photos from the Index Screen Format Shooting Fmode 9 N 1 Playback † ƒ ’ y } Open the index screen that contains the scene or photo you want to delete (A 66, 72).
Basic Playback To select individual scenes or photos 1 Touch on the individual scenes or photos you want to delete. • A checkmark ! will appear on the scenes or photos you touch. The total number of selected scenes or photos will appear next to the " icon. • Touch a selected scene or photo to remove the checkmark. To remove all checkmarks at once, touch [Remove All] > [Yes]. 2 After selecting all the desired recordings, touch [OK].
Basic Playback 2 Delete the scene. Touch the screen to display the playback controls > [Ý] > [Edit] > [Delete] > [Yes] > [OK] ■ Deleting a Single Photo Format Shooting Fmode 9 N Playback † ƒ ’ y } 1 In single photo view, select the photo you want to delete (A 72). 2 Delete the photo. Touch the screen to display the playback controls > [Edit] > [Delete] > [¸ Proceed] > [Yes] 3 Swipe left/right to select another photo to delete or touch [X]. • Be careful when deleting recordings.
Basic Playback • Photos that were protected with other devices and then transferred to the memory card when it was connected to a computer cannot be deleted with this camcorder. • To delete all recordings and make all recordable space available again you may prefer to initialize the memory (A 38).
Advanced Recording Functions Recording Settings and Shooting Modes 80 This section explains how to change the camcorder’s recording settings and how to use the various shooting modes to obtain great looking recordings. Convenient Functions 94 This section introduces some of the camcorder’s functions that you may find convenient in special situations. For example, slow & fast motion recording, fun decorations and faders for your scenes, and more.
Recording Settings and Shooting Modes Recording Settings and Shooting Modes Selecting the Movie Recording Format (AVCHD/MP4) You can choose to record movies in AVCHD or MP4 format. AVCHD movies offer fantastic picture quality during playback. They can also be easily copied to external devices, such as a Blu-Ray Disc recorder. MP4 movies are versatile and can be easily saved on smartphones or uploaded to the Web.
Recording Settings and Shooting Modes 0 > [3 Recording Setup] > [Video Quality] > Desired video quality* > [K] > [X] * You can view details about the video quality with the following procedure. To view information on the video quality 1 Touch [I]. • A screen with the resolution, bit rate and frame rate will appear. 2 Touch [K]. • For details on approximate recording times, refer to the Reference Tables (A 297).
Recording Settings and Shooting Modes • The following types of MP4 scenes will be recognized as multiple files on other devices. - Scenes exceeding 4 GB. - Scenes recorded at 35 Mbps exceeding 30 minutes. - Scenes recorded at a video quality other than 35 Mbps exceeding 1 hour. • Depending on the TV, you may not be able to play back movies recorded in 50P or at 35 Mbps. • When the shooting mode is set to †, recording in 50P or 35 Mbps is not available.
Recording Settings and Shooting Modes e Dual Recording and Relay Recording When you record movies, you can use dual recording to simultaneously record one more scene (in MP4 format, at 4 Mbps video quality) in addition to the main scene being recorded. This additional MP4 scene is saved on the memory not currently selected for recording. Because the resulting scene is in MP4 format, it is ideal for transferring to another device or uploading to the Web.
Recording Settings and Shooting Modes Selecting the Shooting Mode In addition to N mode, the camcorder features a number of shooting modes that offer the most appropriate settings for a variety of special scenes. You can also use the ’ shooting mode when you want the camcorder to set the exposure automatically but control manually some advanced settings. Format Shooting Fmode * 9 N Playback † ƒ ’ y } * Except for 9 mode.
Recording Settings and Shooting Modes • If you selected [† Cinema] or [ƒ Scene], continue the procedure to select the cinema-look filter (A 88) or Special Scene mode (A 90). Options ( Default value) [9 Baby] Use 9 mode to record all your little one’s precious moments (A 86). [N Auto] Let the camcorder take care of most of the settings while you concentrate on recording. Great for beginners or if you just prefer not to bother with detailed camcorder settings.
Recording Settings and Shooting Modes Baby Mode With the optimized settings in 9 mode, baby’s skin will appear with vibrant clarity. In addition, you can add a stamp to the video to show how much time has passed since baby was born. Format Shooting Fmode * 9 N Playback † ƒ ’ y } * Even if the video format was set to MP4, when you change the shooting mode to 9, the video format will automatically change to AVCHD.
Recording Settings and Shooting Modes Highlight Priority Mode You can use mode to capture the colors and gradation in the brightest areas of the picture in more detail, closely approximating what you remember seeing with your own eyes. This is particularly effective when recording bright blue skies, skin tones, shimmering water surfaces, shiny metal or glass structures and similar bright scenes.
Recording Settings and Shooting Modes • When playing back scenes recorded in mode, the following adjustments are recommended. - Playback on the camcorder: Set 1 > q > [ View Assistance] to [i On]. - Playback on a TV or external monitor: Increase the brightness of the TV, computer monitor, etc. Cinema Mode and Cinema-Look Filters In † mode, the camcorder will adjust the frame rate and several other picture-related settings to give your recordings a cinematic look.
Recording Settings and Shooting Modes To change the cinema-look filter 1 Touch the [FILTER] button on the bottom left corner of the screen. 2 Select the desired cinema-look filter and then touch [OK]. Options ( Default value) The camcorder offers 5 cinema-look filters. Select the desired filter while previewing the effect on the screen. [1. Cinema Standard] [2. Vivid] [3. Cool] Filter number (will appear in the [FILTER] button) [4. Sepia] [5.
Recording Settings and Shooting Modes Special Scene Modes Recording in a very bright ski resort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene mode. Format Shooting Fmode 9 N Playback † ƒ ’ y } Touch the shooting mode button (A 84) > [ƒ Scene] > [OK] > Desired Special Scene mode > [OK] Options ( Default value) [H Portrait] The camcorder uses a large aperture to achieve a sharp focus on the subject while blurring the background.
Recording Settings and Shooting Modes [K Snow] To record in bright ski resorts without the subject being underexposed. [L Beach] To record on a sunny beach without the subject being underexposed. [M Sunset] To record sunsets in vibrant colors. [N Low Light] To record in low-light situations. [O Spotlight] To record spotlit scenes. [P Fireworks] To record fireworks.
Recording Settings and Shooting Modes • [H Portrait]/[I Sports]/[K Snow]/[L Beach]: The picture may not appear smooth during playback. • [H Portrait]: The blur effect of the background increases the more you zoom in (S). • [K Snow]/[L Beach]: The subject may become overexposed on cloudy days or in shaded places. Check the image on the screen. • [N Low Light]: - Moving subjects may leave a trailing afterimage. - Picture quality may not be as good as in other modes. - White points may appear on the screen.
Recording Settings and Shooting Modes Programmed AE Mode: Adjusting Settings to Match Your Needs Give yourself the most control while shooting by using the Programmed AE (AE: auto exposure) shooting mode. As with other shooting modes, the camcorder automatically adjusts the shutter speed and aperture. However, this mode offers you the most versatility by allowing you to adjust other settings to achieve the results you are looking for.
Convenient Functions Convenient Functions Slow & Fast Motion Recording When the movie format is set to MP4, you can use slow motion to capture scenes with a lot of movement so they are played back at half the normal speed, or fast motion to compress the passage of time into time-lapse scenes. You can choose between using slow & fast motion recording for the entire scene or for parts of the scene that you specify. Depending on which method you use, the available slow & fast motion rates will differ.
Convenient Functions 2 Set the video quality. 0 > [3 Recording Setup] > [Video Quality] > Desired video quality > [K] > [X] • The video quality must be set to 24 Mbps or 17 Mbps for fast motion recording, or 17 Mbps for slow motion recording. 3 Select the slow/fast motion rate.
Convenient Functions To set the recording time Recording one frame at each interval results in a smoother time-lapse video. Recording about 0.5 seconds of video at each interval may be better for recording fast-moving subjects. [w] > Select [1 Frame] or [0.5 sec] > [K] Options [0.5 sec] Real time elapsed in a 1-minute scene Slow motion: Every 0.02 (1/50) sec. [x1/2] — 30 sec. Fast motion: [x2] Every 0.08 sec. — 2 min. [x4] Every 0.16 sec. — 4 min. [x10] Every 0.4 sec. Every 4.8 sec. 10 min.
Convenient Functions ■ Using Slow & Fast Motion Recording for Part of a Scene You can select which parts of a scene to record in slow & fast motion (flexible slow & fast motion recording). At a touch, you can switch between 1/2x slow motion, normal speed and 2x fast motion. Format Shooting Fmode 9 N 1 Playback † ƒ ’ y } Make sure the camcorder has sufficient power to complete the operation. • Insert a fully charged battery pack or use the supplied compact power adapter. 2 Set the video quality.
Convenient Functions 4 Select the desired slow/fast motion rate. 2x fast motion 1x normal speed 1/2x slow motion 5 Press Y to start recording. • During fast motion recording, the camcorder will record one frame at every interval. 6 While recording, touch one of the other two buttons to change the slow/fast motion rate. • Note that the scene counter will advance more quickly with [ x1/2 Slow] and more slowly with [ x2 Fast]. • Touch [v x1 Normal] to return to the camcorder to normal speed.
Convenient Functions • e Slow & fast motion recording cannot be used while the camcorder is controlled remotely from an iOS/ Android device. • When the shooting mode is set to †, 1/2x slow motion recording of an entire scene is not available; only fast motion recording of an entire scene is available. Decoration: Adding a Personal Touch Add a new level of enjoyment to your scenes by decorating them.
Convenient Functions • In 9 mode only: Touch [Ò] on the bottom right corner of the screen. 2 Use a tool from the toolbar as explained in the following procedures. 3 Press Y to record movies with your decorations. • You can add decorations even while recording a scene. 4 Touch [X] to exit the decoration screen. • [Animated Stamps] and the [Date/Time] or [9] stamps cannot be used at the same time.
Convenient Functions 3 4 5 6 7 8 [Ó Pens and Stamps] Select the type of pen or stamp and its color. [× Animated Stamps] Select animated stamps to add to your decoration. [& Date/Time] or [9] (in 9 mode) Add the date and/or time as a caption that will be included in the recording. In 9 mode, add stamps to track baby’s age, height and weight. [Ü] (Image Mix) Choose one of 26 different frames to add onto the canvas. [Ý] In recording mode: Pause the live video. Touch [Þ] again to restore the live video.
Convenient Functions • To change color: Touch [Ó] > [Ö] > select a color from the color palette > [OK]. • To clear your freehand drawings and stamps: Touch [Ó] > [Clear] > [Yes] > [OK]. • To save your freehand drawings and stamps on the memory: Touch [Ó] > [& Save]* or [8 Save]* > [Yes] > [OK]. • To load a previously saved canvas (freehand drawings and stamps only) from the memory: Touch [Ó] > [& Load]** or [8 Load]** > [Yes] > [OK].
Convenient Functions 2 3 Touch one of the buttons and then touch [OK]. Touch anywhere on the canvas to place the selected animated stamp. • You can also drag some animated stamps to a different location. ■ To use [Date/Time] Format Shooting Fmode 9 N † ƒ ’ Playback * y } * Except when playing back from the [9] index screen (Baby album). 1 Touch [&]. • The [Date/Time] screen will appear. 2 Touch [Date] or [Time]. • To remove a selected stamp, touch it again. 3 Touch [OK].
Convenient Functions Format Shooting Fmode 9 N Playback † ƒ ’ y* } * Only when playing back from the [9] index screen (Baby album). 1 Touch [9]. • The screen with stamps for 9 mode will appear. 2 Touch [91], [92] or [93] to select the desired baby. • The design of the stamps is slightly different for each baby. 3 Register baby’s information as necessary. • To register baby’s birth date: Touch [w] next to the baby’s age button.
Convenient Functions 5 Touch [OK]. • The selected stamp(s) will appear. 6 You can touch any stamp and drag it to the desired location. • For the age stamp, the display will change as follows: - Before 1 week: days - 1 week – less than 1 month old: weeks - 1 month – less than 1 year old: months - 1 year – less than 2 years old: years and months - 2 years old and older: only years ■ To use image mix Image mix frames can be combined with the live video for fun special effects.
Convenient Functions • e Before performing this procedure, make sure that the memory selected for recording (A 82) or playback (A 68) contains the image mix frames. 1 2 Touch [Ü] to open the [Select Image] screen. Touch [+] or [-] to select a different image mix frame. • You can select from 26 image mix frames (or 20 specially designed image mix frames, in 9 mode).
Convenient Functions • To use the various decorations specially designed for 9 mode, play back a scene from the Baby album ([9] index screen). 2 3 4 5 Touch the screen to display the playback controls. Touch [Ò] to display the decoration toolbar. Decorate the scene using the tools from the toolbar as explained in the previous sections. Touch [X] to exit the decoration screen. Video Snapshot You can record a series of short scenes, each a few seconds long.
Convenient Functions • The camcorder records for about 4 seconds (the blue frame serves as a visual progress bar) and then automatically returns to record standby mode. • You can change the length of the video snapshot scenes recorded with the 1 > p > [Video Snapshot Length] setting. • Any of the following actions will deactivate the video snapshot function. - Turning off the camcorder, pressing ], changing the shooting mode, etc. - Changing the movie format (AVCHD/MP4), video quality or frame rate.
Convenient Functions 0 > [1 Other Settings] > p > [Face Detection & Tracking] > [i On }] > [X] • To turn off face detection, repeat the procedure selecting [j Off] instead. 2 Point the camcorder at a person. • If there is more than one person in the picture, the camcorder will automatically select one person it determines is the main subject. The main subject is indicated by a white frame and the camcorder will optimize the settings for that person. Other faces will have gray frames.
Convenient Functions • Touching somewhere with a color or pattern unique to the subject will make it easier to track. However, if there is another subject in the vicinity that shares similar characteristics to the selected subject, the camcorder may start tracking the incorrect subject. Touch the screen again to select the desired subject. • In certain cases, faces may not be detected correctly. Typical examples include: - Faces extremely small, large, dark or bright in relation to the overall picture.
Convenient Functions • In certain cases, tracking may not be able to track the subject. Typical examples include: - Subjects extremely small or large in relation to the overall picture. - Subjects too similar to the background. - Subjects lacking sufficient contrast. - Fast-moving subjects. - When shooting indoors with insufficient lighting. Faders The camcorder offers two professional looking transition effects to fadein or fade-out scenes.
Convenient Functions To fade in/out Press Y in record standby mode to start recording with a fade in. Press Y while recording to fade out and then stop recording. • When you apply a fader, not only the picture but also the sound will fade in or out. • Faders cannot be used in the following cases: - When the shooting mode is set to † and the cinema-look filter is set to [Old Movies]. - During slow & fast recording mode. - When recording scenes with decorations. - When recording video snapshot scenes.
When You Want More Control When You Want More Control Exposure When you want to record a subject that is much brighter or darker than its surroundings, the automatic exposure obtained by the camcorder may not be best for that specific subject. To correct this, you can compensate the exposure to make the whole picture brighter or darker, you can use Touch AE to have the camcorder optimize the exposure for the subject you indicate, or you can use a combination of both.
When You Want More Control • The compensation range may vary depending on the initial brightness of the image, and some values may be grayed out. 3 Touch [X] to apply and lock the exposure compensation value. • During exposure lock, y and the exposure compensation value will appear on the screen. ■ Touch AE 1 Touch a subject that appears inside the y frame. • The Touch AE mark (I) will flash and the exposure will be optimized automatically for the subject you selected.
When You Want More Control • By default, the camcorder corrects for backlight conditions. You can turn off the automatic correction with the 1 > p > [Auto Backlight Correction] setting. • Exposure adjustment is not available when the shooting mode is set to ƒ and the Special Scene mode is set to [P Fireworks]. Focus Autofocus may not work well on the following subjects. In such case, focus manually.
When You Want More Control • Touch [D] again to return the camcorder to autofocus. 2 Touch and hold [F] or [E] to adjust the focus. • The focusing distance displayed will change as you adjust the focus. The focusing distance will be displayed for about 2 seconds. You can change the units used for the distance display with the 1 > q > [Displayed Units] setting. • When 1 > p > [Focus Assistance] is set to [i On], the center of the screen will be magnified to help you focus more easily.
When You Want More Control • When you use [E] and [F] to adjust the focus manually, you can touch inside the frame to automatically focus on that spot. White Balance The white balance function helps you to accurately reproduce colors under different lighting conditions so that white objects will always look truly white in your recordings.
When You Want More Control Options ( Default value) [Ã Automatic] The camcorder automatically sets the white balance for natural looking colors. [¼ Daylight] To record outdoors. [É Tungsten] To record under tungsten and tungsten-type 3-wavelength fluorescent lighting. [Å Custom WB] Use the custom white balance setting to make white subjects appear white under colored lighting. • When you select the custom white balance: - Set 2 > [Zoom Type] to [ Optical].
When You Want More Control Frame Rate You can change the frame rate (the number of frames recorded per second) of AVCHD movies to change the look of your movies. MP4 movies with a video quality setting of 35 Mbps are recorded at 50P while those with other video quality settings are recorded at 25P and these frame rates cannot be changed.
When You Want More Control Tele Macro Using tele macro, the camcorder can focus at a shorter distance (up to 50 cm from the subject at full telephoto), allowing you to get closer shots of small subjects like flowers and insects. This function also adds a soft focus to the background, so the subject not only looks larger but it also stands out more.
Recording Audio Recording Audio Audio Scenes You can have the camcorder optimize the audio settings of the built-in microphone by selecting the audio scene that matches your surroundings. This will greatly enhance the sense of “being there”. Format Shooting Fmode * N 9 Playback † ƒ ’ y } * When the shooting mode is set to 9, the audio scene is automatically set to [‘ Standard].
Recording Audio [ Noise Suppression] To record scenes while reducing noise from wind, passing vehicles and similar ambient sound. Ideal for recording at the beach or in places with a lot of noise. Using Headphones Use headphones for playback or to check the audio level while recording. Connect the headphones to the AV OUT/× terminal. This terminal is used for both headphones and analog audio/video output so be sure to change the function of the terminal in advance.
Recording Audio ■ Adjusting the Volume during Playback Format Shooting Fmode 9 N † ƒ ’ Playback * y } * Only during the playback of a slideshow of photos. For that procedure refer to Photo Slideshow (A 134). After changing the function of the AV OUT/× terminal and connecting the headphones, you can adjust the headphone’s volume also during playback.
Recording Audio • Use commercially available headphones with a 3.5 mm minijack. • Even if [AV/Headphones] was set to [Ó Headphones] in a playback mode, the function of the AV OUT/× terminal will return automatically to AV output when you turn off the camcorder. • e Audio will not be output from the × (headphones) terminal while Wi-Fi functions are in use.
Advanced Playback and Editing Functions Advanced Playback Functions 126 This section explains how to grab still frames or capture video snapshot scenes from an existing scene, how to play back recordings set to background music, how to play back a slideshow of your photos and more. Editing Functions 136 This section explains how to trim or divide scenes, how to convert scenes to smaller MP4 scenes and how to change the image used as the thumbnail of a scene in the Baby album.
Advanced Playback Functions Advanced Playback Functions Capturing Video Snapshot Scenes and Grabbing Still Frames from a Movie You can capture video snapshot scenes or grab still frames from a previously recorded scene. For example, you may want to print photos from video recorded at a party or create a small video clip using video snapshot scenes from the highlights of an event.
Advanced Playback Functions • You can change the length of the video snapshot scenes you capture with the 1 > s > [Video Snapshot Length] setting. • A video snapshot scene can be captured only during playback; it cannot be captured during playback pause mode. • Video snapshot scenes cannot be captured from scenes shorter than 1 second.
Advanced Playback Functions ■ Grabbing Still Frames Format Shooting Fmode 9 N Playback † ƒ ’ y } 1 Play back the scene from which you want to grab frames (A 66). 2 Pause the playback at the desired point and grab the frame to save it as an image file. Touch the screen to display the playback controls > [Ý] > [{] 3 Touch [Ñ] to stop the playback. • The size of frame grabs from a scene is 1920x1080.
Advanced Playback Functions Playback with Background Music Canon offers for download 3 music tracks that can be used as background music when playing back your movies or a slideshow of your photos. You can also mix the original audio and the background music and adjust the mix balance to your preference. Format Shooting Fmode 9 N † ƒ ’ Playback }* y * Only during the playback of a slideshow of photos. For that procedure refer to Photo Slideshow (A 134). 1 2 Open the desired index screen (A 66).
Advanced Playback Functions 4 5 Delete the music track selected. Listen to the music track selected. Touch again (Ñ) to stop the playback. 3 Adjust the mix balance between the original sound and the background music. • Touch [y] (more of the original sound) or [Û] (more of the background music) or swipe left/right along the [Music Balance] bar to adjust the background music balance as desired. 4 Touch [X] and then touch a scene to start the playback with the selected background music.
Advanced Playback Functions • If you use copyrighted songs and music tracks in your video creations, remember that music under copyright may not be used without permission from the copyright holder, except for cases permitted under applicable laws, such as for personal use. Make sure to follow applicable laws when using music files. • The music files used for background music are stored in the built-in memory (e only).
Advanced Playback Functions Selecting the Playback Starting Point If you have a very long scene, you may want to start playing back the scene from a certain point. You can use the movie timeline to break down an AVCHD scene into segments at fixed time intervals ranging from 6 seconds to 6 minutes. Format Shooting Fmode 9 N 1 2 Playback † ƒ ’ y } Open the desired index screen for AVCHD movies (A 66). Open the scene’s [Timeline] screen. [j] > Desired scene • The [Timeline] screen appears.
Advanced Playback Functions 3 Touch the desired frame in the timeline ruler to start playing back the scene from that point. 1 2 4 5 3 6 7 1 2 3 4 5 6 7 8 8 Touch twice to return to the index screen. Previous/next scene. Swipe left along the ruler to display the next 5 frames. Scene’s video quality and length. Recording date and time. Swipe right along the ruler to display the previous 5 frames. Current scene / Total number of scenes. Currently selected interval between frames.
Advanced Playback Functions Photo Slideshow You can play a slideshow of photos in the camcorder. You can even set it to music. Format Shooting Fmode 9 N 1 2 Playback † ƒ ’ y } Open the [}] index screen (A 72). Select the music track. 0 > [1 Other Settings] > > [Select Music] > [i On] > [Í] or [Î] to select the desired music track (A 129) > [X] 3 Touch the photo that will open the slideshow to display it in single photo view.
Advanced Playback Functions • The music files used for background music are stored in the built-in memory (e only). To play back with background music a slideshow of photos recorded on a memory card, you will need to download the music files in advance (A 300). • After downloading the music files to your computer, use Transfer Utility LE to transfer them to the memory that contains the recordings you want to play back with background music.
Editing Functions Editing Functions Dividing Scenes You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest. Format Shooting Fmode 9 N 1 2 Playback † ƒ ’ y } Play back the desired scene (A 66). At the point where you want to divide the scene, open the screen for dividing scenes. Touch the screen to display the playback controls > [Ý] > [Edit] > [Divide] 3 Bring the scene to a precise point, if necessary. • Playback controls will appear on the screen (A 69).
Editing Functions • When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds. • If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene. • During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut. • Scenes that are too short (less than 3 seconds) cannot be divided.
Editing Functions Touch the screen to display the playback controls > [Ý] > [Edit] > [Trim] 3 Bring the scene to a precise point, if necessary. • The point where the scene will be trimmed is indicated by the ´ marker. • Playback controls will appear on the screen (A 69). Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point. 4 Trim the scene.
Editing Functions • Scenes cannot be trimmed within about 0.5 seconds from the beginning or the end of the scene. Changing the Thumbnail Image of a Scene For scenes recorded in 9 mode, you can change the thumbnail image that will appear in the Baby album ([9] index screen). Format Shooting Fmode Playback 9 N 1 2 3 † ƒ ’ y } Open the [9] index screen (A 66). Play back the desired scene.
Editing Functions [Set] > [Yes] • Only the thumbnail of the scene displayed in the Baby album ([9] index screen) will change. • Dividing a scene whose thumbnail image was changed will reset the scene’s thumbnail image. e Copying Recordings to a Memory Card You can copy your recordings from the built-in memory to a memory card. • Insert the memory card to which you want to copy the recordings into the memory card slot and make sure it has sufficient available space.
Editing Functions ■ Copying Recordings from the Index Screen Format Shooting Fmode 9 N 1 Playback † ƒ ’ y } Open the desired index screen in the built-in memory (A 66, 72). • To copy all the scenes/photos recorded on a specific date, swipe left/right until a scene or photo you want to copy appears. 2 Copy the recordings.
Editing Functions Options [] or [] Copy all the scenes/photos recorded on a particular date. For AVCHD scenes, a date will appear in the button. For MP4 scenes and photos, a folder name will appear. The last 4 digits of the folder name indicate the date of the recordings (ex. 1103 = November 3). [Select] Select individual recordings to copy. [All Scenes] or [All Photos] Copy all the scenes or photos.
Editing Functions • In the following cases, you will not be able to copy recordings to the memory card: - If the memory card slot cover is open. - If the LOCK switch on the memory card is set to prevent writing. - If the folder and file numbers have reached their maximum value (A 227). Converting Movies to MP4 Format You can convert previously recorded scenes to MP4 format, which is widely used on the Web and on other devices.
Editing Functions • If you want to add background music to the converted scene, select a music track (step 2, A 129). 2 Open the screen for selecting scenes to convert. [Edit] > [Convert to MP4 (&'8)] (e) or [Convert to MP4] (d) > [OK] > [Join Scenes]* > Desired video quality of converted movies * Only necessary if you want to join all the selected scenes into a single converted movie. 3 Touch the individual scenes you want to convert. • A checkmark ! will appear on the scenes you touch.
Editing Functions • To change audio settings: You can change the volume of the converted scene or the balance between original sound and background music if you had selected a music track. [Ý] > [Ø] or [Ù]** to adjust the volume > [y] or [Û] to adjust the background music balance > [K] ** [Ô] or [Õ] when using headphones. • To add decorations*: [Ò] > Decorate the scene (A 99) * Cinema-look filters and decorations cannot be applied at the same time. 5 Touch [START] to convert the scene(s).
Editing Functions Original AVCHD scene Converted MP4 scene 24 Mbps (1920x1080) 17 Mbps (1920x1080) 4 Mbps (1280x720) MXP (1920x1080) Ü Ü Ü FXP (1920x1080) Ü Ü Ü LP (1280x720) Ü Ü Ü MP4 movies: Video quality and size of scenes before and after conversion Converted scene Original scene 24 Mbps (1920x1080) 17 Mbps (1920x1080) 4 Mbps (1280x720) 35 Mbps (1920x1080) – – – 24 Mbps (1920x1080) Ü Ü Ü 17 Mbps (1920x1080) Ü Ü Ü 4 Mbps (1280x720) – – Ü 146
Editing Functions • If you convert AVCHD movies with a frame rate of 50i, the frame rate of the resulting MP4 movie will be 25P. • After repeatedly recording and deleting scenes (fragmented memory), MP4 conversion may stop working correctly. • Scenes recorded using different frame rates cannot be joined into a single scene during MP4 conversion.
Editing Functions 3 Select the playback rate of the converted fast motion scenes and then touch [OK]. • When you select a fast motion rate between [x10] and [x1200], before touching [OK], you can also select whether to keep a single frame or 0.5 seconds of video. Keeping one frame at each interval results in smoother time-lapse scenes, but keeping 0.5 seconds of video may be better for fast-moving subjects. [w] > [1 Frame] or [0.5 sec] > [K] 4 Touch the individual scenes you want to convert.
External Connections Terminals on the Camcorder 150 This section gives more details about the camcorder’s output terminals and presents connection diagrams for connecting your camcorder to other devices. Playback on a TV Screen 155 This section explains how to connect the camcorder to an HDTV to play back your recordings.
Terminals on the Camcorder Terminals on the Camcorder Open the LCD panel to access the terminals on the camcorder. 1 1 2 3 2 3 AV OUT/× Terminal HDMI OUT Terminal The HDMI OUT terminal offers a high-quality digital connection that combines audio and video in a single convenient cable. This terminal is an HDMI mini receptacle. When using a commercially available HDMI cable, make sure the HDMI cable is Type A to Type C. USB Terminal This terminal is a mini-AB receptacle.
Terminals on the Camcorder Connection Diagrams In the following connection diagrams, the left side shows the terminals on the camcorder and the right side shows (for reference only) an example of terminals on a connected device. Connection 1 HDMI Type: Digital Quality: High definition Output only Connect to a high-definition TV (HDTV) with an HDMI input terminal.
Terminals on the Camcorder • While a cable is connected to the HDMI OUT terminal, there will be no video output from the AV OUT/× terminal. • Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors. • Depending on the HDTV, correct playback of personal video content may not be possible using connection 1. Try using connection 2.
Terminals on the Camcorder Connection 2-햲 Composite Video Type: Analog Quality: Standard definition Output only Connect to a standard TV or a VCR with audio/video input terminals.
Terminals on the Camcorder Connection 3 USB Type: Digital data connection Output only Connect the camcorder to a computer to save your recordings or to the optional CS100 Connect Station to automatically back up your recordings. e only: You can also connect to an external hard drive to save a perfect copy of an entire memory.
Playback on a TV Screen Playback on a TV Screen Connect the camcorder to a TV to enjoy your recordings with family and friends. Format Shooting Fmode 9 N 1 2 Playback † ƒ ’ y } Turn off the camcorder and the TV. Connect the camcorder to the TV. • Refer to Connection Diagrams (A 151) and select the most appropriate connection for the TV used. 3 Turn on the connected TV. • On the TV, select as the video input the same terminal to which you connected the camcorder.
Playback on a TV Screen • e Audio and video will not be output from the HDMI OUT terminal or AV OUT/× terminal while using Wi-Fi functions. • Connection 2-햲 or 2-햳: When you play back your 16:9 movies on standard TV sets with a 4:3 aspect ratio, the TV set will switch automatically to widescreen mode if it is compatible with the WSS system. Otherwise, change the aspect ratio of the TV manually.
Saving and Sharing Your Recordings Saving and Sharing Your Recordings Save your recordings regularly. You have several options for saving your recordings. As each method offers different advantages, select how you want to save your recordings depending on how you intend to use them. USB connection Directly from the memory card1 Computer (A 158) Save recordings on the computer.2 e NFC+WiFi connection Blu-ray Disc recorder and other video recorders3 (A 170) Play back on a connected TV, create discs, etc.
Saving and Sharing Your Recordings 1 2 3 4 e To save recordings from the built-in memory, copy them to the memory card in advance (A 140). The editing/playback functions that can be used after saving your recordings depend on the specifications of the computer and the software installed. The editing/playback functions that can be used depend on the specifications of the recorder used. Also, you may not be able to save MP4 movies. Between CS100 Connect Stations or using CANON iMAGE GATEWAY services.
Saving and Sharing Your Recordings Installation 1 Download the compressed file from PIXELA’s website. • Visit the following website to download the compressed installation file. http://pixela.jp/cetule_dl 2 Uncompress the file. • The compressed file contains the installer (setup.exe) and the Software Guide (PDF file). 3 Install the software as explained on PIXELA’s website.
Saving and Sharing Your Recordings • When the connection is correctly established, [USB Connection] will appear on the screen. 4 Computer: Double-click the icon shown on the right. • Windows computers: If the AutoPlay dialog box appears, close it. 5 Computer: Save your recordings as explained in the PDF Software Guide. ■ Saving MP4 Movies and Photos (Windows/Mac OS) With the software CameraWindow DC you can save MP4 movies and photos to your computer and easily organize them.
Saving and Sharing Your Recordings 1 Download the software from your local Canon website. • Visit the following website to download CameraWindow DC. www.canon.com/icpd (Click on your country/region, search for your camcorder model and then proceed to the download page.) 2 Double-click the file downloaded in step 1 to begin installation. • Follow the onscreen instructions to install the software. • For Windows users, if a User Account Control dialog box appears, follow the instructions.
Saving and Sharing Your Recordings 3 Connect the camcorder to the computer using the supplied USB cable. • Connection 3-햲. Refer to Connection Diagrams (A 154). • If a device selection screen appears, select [Computer]. • When the connection is correctly established, [USB Connection] will appear on the screen. 4 Computer: CameraWindow DC will start automatically and the main screen will appear.
Saving and Sharing Your Recordings • When the camcorder is connected to a computer: - Do not open the memory card slot cover. - Do not change or delete any of the camcorder’s folders or files directly from the computer as this may result in permanent data loss. When saving recordings on a computer, we recommend using the software described in this section (Transfer Utility LE for AVCHD movies; CameraWindow DC for MP4 movies and photos).
Saving and Sharing Your Recordings • The following types of MP4 scenes will be recognized as multiple files on a computer. - Scenes exceeding 4 GB. - Scenes recorded at 35 Mbps exceeding 30 minutes. - Scenes recorded at a video quality other than 35 Mbps exceeding 1 hour. • Depending on the computer, the software may not work correctly or you may not be able to play back movies.
Saving and Sharing Your Recordings 1 2 3 Power the camcorder using the compact power adapter. Press ] to set the camcorder to playback mode. Select the USB connection type. 0 > [1 Other Settings] > q > [USB Connection Type] >[ Connect Station] or [ Connect and Set] > [X] 4 Connect the camcorder to the connect station using the supplied USB cable. • Connection 3-햲. Refer to Connection Diagrams (A 154). • If a device selection screen appears, select [Connect Station].
Saving and Sharing Your Recordings Initialize the hard drive (A 169) when you use it with this camcorder for the first time. Format Shooting Fmode 9 N Playback † ƒ ’ y } ■ Saving a Memory onto an External Hard Drive 1 2 3 Power the camcorder using the compact power adapter. Press ] to set the camcorder to playback mode. Connect the camcorder to the external hard drive. • Connection 3-햳. Refer to Connection Diagrams (A 154).
Saving and Sharing Your Recordings Before disconnecting the external hard drive Before turning off or physically disconnecting the external hard drive, be sure to safely end the connection to the camcorder to avoid damage to your files. From the [External Hard Drive] screen: [Safely Remove Hard Drive] > [Yes] • Make sure you power the camcorder with the compact power adapter before you save a memory to the external hard drive.
Saving and Sharing Your Recordings • If the external hard drive is partitioned, only the first partition will be recognized. ■ Playing Back Previously Saved Recordings from the External Hard Drive 1 Connect the external hard drive to the camcorder. • Steps 1 to 3 in the previous procedure (A 166). 2 Touch [Play Back from Hard Drive] and select the memory save folder you want to play back. • The index screen will appear. 3 Touch a recording to play it back.
Saving and Sharing Your Recordings 0 > [1 Other Settings] > q > [Delete Memory Save Folder] > [Yes] > [OK] 2 Safely end the connection to the external hard drive before physically disconnecting it (A 167). • Be careful when deleting recordings. Once deleted, recordings cannot be recovered. ■ Initializing the External Hard Drive 1 Connect the external hard drive to the camcorder. • Steps 1 to 3 in the previous procedure (A 166). 2 Initialize the external hard drive.
Saving and Sharing Your Recordings • Initializing the external hard drive will permanently erase all the data on the hard drive (including your recordings, previous data not saved with the camcorder, and partitioned drives). Make sure to copy in advance important data to a computer or other device.
Saving and Sharing Your Recordings Format Shooting Fmode Playback 9 N 1 2 † ƒ ’ y } Power the camcorder using the compact power adapter. Connect the camcorder to the VCR using the optional STV-250N Stereo Video Cable. • Connection 2-햲 or 2-햳. Refer to Connection Diagrams (A 153). 3 Open the index screen that contains the scenes you want to copy (A 66). • Verify that 1 > q > [AV/Headphones] is set to [Ò AV].
Saving and Sharing Your Recordings • Use an external Blu-Ray Disc recorder compliant with AVCHD ver. 2.0 specifications to copy onto Blu-Ray discs movies recorded in 50P or MXP mode.
e Wi-Fi Functions Overview of the Camcorder’s Wi-Fi Functions 174 This is an introduction to the Wi-Fi functions offered by the camcorder and contains also important information about the supported Wi-Fi standards.
Overview of the Camcorder’s Wi-Fi Functions Overview of the Camcorder’s Wi-Fi Functions You can use the camcorder’s Wi-Fi functions to connect wirelessly to Wi-Fi enabled devices* like smartphones or tablets and save and upload your recordings. Refer to Glossary (A 210) for a definition of some of the frequently used terms in this text. * “iOS device” is used in this text to refer to Wi-Fi-enabled iPhones and iPads, while “Android device” refers to Wi-Fi-enabled Android smartphones and tablets.
Overview of the Camcorder’s Wi-Fi Functions CS100 Connect Station (optional) • Convenient option to save, play back and share your recordings. You can use NFC technology to easily initiate the file transfer over a Wi-Fi connection (A 192). CANON iMAGE GATEWAY • Connecting the camcorder to an access point (home network) connected to the Internet, you can also share recordings on CANON iMAGE GATEWAY and enjoy a number of Web services, including uploading recordings to YouTube (A 195).
Overview of the Camcorder’s Wi-Fi Functions ■ Before Using Wi-Fi Functions Depending on the Wi-Fi function used, the camcorder will connect wirelessly directly to a Wi-Fi-enabled device, such as a smartphone, or to a Wi-Fi network via an access point (wireless router)*. After selecting the function you want to use, follow the onscreen directions to connect the camcorder. This camcorder is also compatible with NFC (near field communication) international standards.
Overview of the Camcorder’s Wi-Fi Functions • When using the camcorder’s Wi-Fi functions, do not cover the top back area of the camcorder with your hand or other object. The Wi-Fi antenna is located there and covering it may interfere with wireless signals. Wi-Fi antenna • Do not open the memory card slot cover during the wireless connection. • While using Wi-Fi functions, the camcorder’s automatic power off function will be disabled.
The Camcorder’s Wi-Fi Functions The Camcorder’s Wi-Fi Functions Using an iOS or Android Device as a Remote Control Using the CameraAccess plus app*, you can view the image streamed from the camcorder on your iOS/Android device even when the camcorder is somewhere else. You can use your iOS/Android device as a remote control to start recording on the camcorder and, while using the Monitor from Home function, you can even record the streamed image locally on your iOS/Android device.
The Camcorder’s Wi-Fi Functions • Before you perform these procedures for the first time, download and install the latest version of the CameraAccess plus app on your iOS/Android device. The app can be downloaded for free from the following websites. - iOS devices (App Store): https://appstore.com/cameraaccessplus - Android devices* (Google Play™): https://play.google.com/store/apps/ details?id=jp.co.pixela.
The Camcorder’s Wi-Fi Functions 2 Android devices compatible with NFC: Connect the camcorder and the device as described in Pairing an NFC-compatible Android device (A 181). • When the Wi-Fi connection is correctly established, [Connected] will appear on the camcorder’s screen and the live view image will appear on the CameraAccess plus app’s screen on the Android device. • Use the app’s onscreen controls to operate the camcorder while viewing the live image on the device.
The Camcorder’s Wi-Fi Functions When you have finished recording 1 Camcorder: Touch [End] to end the wireless connection and turn off the camcorder. 2 iOS/Android device: Close the CameraAccess plus app. Pairing an NFC-compatible Android device 1 1, 2 Touch Beep! ** 2* 1 NFC touchpoint Touch the NFC touchpoint on the Android device to the NFC touchpoint on the camcorder. • Align the center of the NFC touchpoints on both devices.
The Camcorder’s Wi-Fi Functions * For illustrative purposes only. For details about the device’s NFC function and the location/marking of the NFC touchpoint, refer to the instruction manual of the Android device used. ** Depending on the settings and specifications of the Android device used, no sound may be emitted. • When using NFC-compatible devices. - When touching an NFC-compatible device to the camcorder, be careful not to forcibly hit the device against the camcorder.
The Camcorder’s Wi-Fi Functions * To use the Monitor while Out Function, an access point compatible with UPnP (Universal Plug and Play) and an Internet connection that can acquire global IP addresses are required. 1 Activate the [Monitor while Out] function. 0 > [ Remote Control+Streaming] > [ Out] > [OK] Monitor while • The first time you activate the function, you will need to set a password and the port to be used by this function (steps 2 to 4).
The Camcorder’s Wi-Fi Functions 5 If necessary, set up a connection to an access point. • If you have previously configured and saved only one connection to an access point, the camcorder will automatically connect to that access point. Continue to step 6. • If you have saved more than one connection to an access point, touch [OK] to use the access point displayed on the screen, and then continue to step 6.
The Camcorder’s Wi-Fi Functions To register the camcorder’s ID in the CameraAccess plus app 1 Android devices compatible with NFC: Connect the camcorder and the device. • Perform only step 1 in Pairing an NFC-compatible Android device (A 181). • Android device: When the camcorder’s ID is correctly registered, a message will prompt you to turn off Wi-Fi on the device. Select Turn off Wi-Fi or Do not turn off Wi-Fi (to keep using Wi-Fi on the device) and then touch Set.
The Camcorder’s Wi-Fi Functions To use the Monitor while Out function 1 2 3 While you are out, start the CameraAccess plus app. Touch Start under Monitor while Out. Enter the password for the Monitor while Out function that you set in the camcorder (step 3, A 183) and then touch Connect. • Use the app’s onscreen controls to operate the camcorder while viewing the live image on the device.
The Camcorder’s Wi-Fi Functions Using the virtual keyboard When you need to enter text for various settings, touch the text field and a virtual keyboard will appear on the screen. The illustration below explains the various keys you can use. 2 3 4 1 1 2 3 4 Switch between letters and numbers/special characters. Change the position of the cursor. Delete the character to the cursor’s left (backspace). Caps Lock.
The Camcorder’s Wi-Fi Functions • For details about the CameraAccess plus app, visit PIXELA’s website. http://pixela.jp/cecap • When the camcorder is in Monitor from Home or Monitor while Out mode, the shooting mode will be set automatically to N. • • This function is not available in the following cases. - When the video quality is 50P or 35 Mbps. - When dual recording or relay recording is activated.
The Camcorder’s Wi-Fi Functions • About the optional CT-V1 Camera Pan Table - If you mount the camcorder on the optional CT-V1 Camera Pan Table, you can use the CameraAccess plus app on your iOS/Android device as a remote control to move the camcorder sideways (panning) in addition to starting/stopping recording. - Notice that there are two possible directions for mounting a camcorder on the CT-V1.
The Camcorder’s Wi-Fi Functions Saving Recordings Using an iOS/Android Device Using the Camera Connect app*, you can save your MP4 movies and photos on an iOS or Android device. Before saving recordings, you can also check the movies** or photos. * The Camera Connect app is available from Canon as a free download from the App Store (iOS devices) and Google Play™ (Android devices).
The Camcorder’s Wi-Fi Functions • The camcorder will be ready to connect with the iOS or Android device. 2 Android devices compatible with NFC: Connect the camcorder and the device as described in Pairing an NFC-compatible Android device (A 181). • When the Wi-Fi connection is correctly established, [Connected] will appear on the camcorder’s screen.
The Camcorder’s Wi-Fi Functions 4 iOS/Android device: Use the Camera Connect app to save the camcorder’s movies and photos. When you have finished Camcorder: Touch [End] > [OK] to end the wireless connection and turn off the camcorder. • Depending on factors such as the wireless network conditions, you may not be able to check movies or it may take some time to check or save them. • The procedure above may differ depending on the version of the device’s OS you are using.
The Camcorder’s Wi-Fi Functions This section explains how to connect the camcorder to the CS100 using NFC (near field communication) and Wi-Fi functions for a simple and effortless operation. You can also connect the camcorder to the connect station using the supplied USB cable (A 164). Format Shooting Fmode 9 N Playback † ƒ ’ Touch Beep! 1 2 y } NFC touchpoint Power the camcorder using the compact power adapter.
The Camcorder’s Wi-Fi Functions • If there is no reaction, try adjusting slightly the position/angle of the camcorder while carefully holding it close to the connect point on the connect station, or very gently touching the camcorder to the connect station. • If the camcorder was turned off, it will turn on in playback mode. • The connect station will emit a beep sound. When the Wi-Fi connection is correctly established, the transfer of files will start automatically.
The Camcorder’s Wi-Fi Functions Sharing Recordings with CANON iMAGE GATEWAY After you register for CANON iMAGE GATEWAY*, you will be able to access various Web services**. You will be able to upload movies and photos to online albums and upload movies to Web services like YouTube. To use this function, you will need an access point connected to the Internet. * Availability differs from area to area.
The Camcorder’s Wi-Fi Functions • Make sure you have completed the following general requirements. - Install CameraWindow DC on your computer (A 160). - Complete the free registration online for CANON iMAGE GATEWAY. - Have ready relevant account settings (user name, password, etc.) for all the services you plan to use (YouTube, etc.). Available services may differ by country/region. ■ Setting the Desired Web Services in the Camcorder Log in to CANON iMAGE GATEWAY and set the Web services you want to use.
The Camcorder’s Wi-Fi Functions • Mac OS: If it does not start automatically, start the program manually. If a device selection window appears, select your camcorder’s model name and click OK. 4 Computer: In the CameraWindow DC’s main screen, click Camera Settings > Set Up Web Services. 5 Computer: Log in to CANON iMAGE GATEWAY and complete the setup process. • Follow the onscreen instructions to register the services you want to use. You will need the account information (user name, password, etc.
The Camcorder’s Wi-Fi Functions • Once you have set the maximum number of Web services in the camcorder, you will not be able to set any additional services. Delete unnecessary Web services and then set the desired Web service. • You cannot set multiple accounts for Web services other than e-mail. ■ Sharing Your Recordings Using Web Services Conveniently share your recordings with family and friends using Web services.
The Camcorder’s Wi-Fi Functions 2 Select the desired Web service. • When you select (e-mail), the list of registered e-mail addresses will appear. Select the e-mail addresses to which you want to send an e-mail notification. 3 Select the type of recordings you want to share and the memory to read. • The types of recordings that can be uploaded depend on the Web service. 4 Touch the scene or photo(s) to upload. • When uploading photos, you can touch up to 10 photos to upload at one time.
The Camcorder’s Wi-Fi Functions Checking your uploads using CANON iMAGE GATEWAY You can use the CANON iMAGE GATEWAY online album’s Library or Album screen to see the movies and photos you uploaded. You can also check what files you have sent and the various settings for the Web services. For details on CANON iMAGE GATEWAY, refer to the Help module (in the upper right of the screen). • The maximum scene length/file size that can be uploaded depends on the Web service.
Wi-Fi Connection and Settings Wi-Fi Connection and Settings Wi-Fi Connection Using an Access Point The camcorder can connect to a Wi-Fi network using an access point (wireless router). You can save settings for up to 4 different access points. General requirements • Correctly configured router that complies with the 802.11b/g/n protocol and is Wi-Fi certified (bears the logo shown to the right) and a home network. Format Shooting Fmode 9 N 1 Playback † ƒ ’ y } Open the [— Network Setup] screen.
Wi-Fi Connection and Settings Options [WPS: Button]* Simply press and hold the WPS button on your wireless router and then touch the camcorder’s screen. This is the easiest connection method if you are using a WPS-compatible access point. Continue the procedure as described in Wi-Fi Protected Setup (WPS) (A 203). [WPS: PIN Code]* Access the access point’s configuration screen using your Web browser. The camcorder will generate a PIN code, which you will enter into the browser.
Wi-Fi Connection and Settings ■ Wi-Fi Protected Setup (WPS) If your access point is WPS-compatible (bears the logo shown below), connecting the camcorder to it can be very easy. If you cannot successfully connect the camcorder using WPS, try using the [Search for Access Points] method. Refer also to the access point’s (wireless router’s) instruction manual. 1 [WPS: Button] method • Press and hold the WPS button on the wireless router. • Depending on the router, the amount of time required may differ.
Wi-Fi Connection and Settings 3 Touch [OK] to save the configuration. • If you were in the process of performing another procedure, the camcorder will automatically connect to the access point. Return to the procedure of the function you were previously using: Step 6 in Streaming via Wi-Fi and Internet (Monitor while Out) (A 184) Step 2 in Sharing Your Recordings Using Web Services (A 199) • Otherwise, touch [K] > [X] to close the menu.
Wi-Fi Connection and Settings • If the access point selected in step 1 did not have a [C] icon, this step is not necessary. 3 Touch [OK] to save the configuration. • If you were in the process of performing another procedure, the camcorder will automatically connect to the access point.
Wi-Fi Connection and Settings • If you selected [OPEN NONE] in step 2, this step is not necessary. 4 Touch [Automatic] or [Manual] to select how to obtain the IP address. • If you selected [Automatic], proceed to step 9. 5 To enter the [IP Address] field, touch [0.0.0.0]. Touch the first field and touch [Í]/[Î] to change the value. Change the rest of the fields in the same way and touch [OK]. 6 Enter the [Subnet Mask] field in the same way and touch [Next].
Wi-Fi Connection and Settings • The Wi-Fi functions available and the setup method will vary depending on the specifications and characteristics of the Wi-Fi network you want to use. Viewing and Changing Wi-Fi Settings You can review and change, if necessary, the settings used for the various Wi-Fi connections and for the Monitor while Out function. Format Shooting Fmode 9 N 1 Playback † ƒ ’ y } Open the [— Check Current Configuration] screen.
Wi-Fi Connection and Settings • The next time you make a wireless connection, you will need to change the Wi-Fi settings on the iOS/Android device. 4 Touch [K] repeatedly to return to the 0 (Home) menu, and then touch [X] to close the menu. To view the access point’s connection settings 2 Touch [Access Point Connection Settings]. • The network names of up to 4 access points saved in the camcorder will appear.
Wi-Fi Connection and Settings To view the settings for the Monitor while Out function (recording mode only) 2 Touch [Monitor while Out Settings]. • The password and port number to be used for the Monitor while Out function will appear. 3 If necessary, change the settings. • Steps 3 and 4 in Streaming via Wi-Fi and Internet (Monitor while Out) (A 183). 4 Touch [K] repeatedly to return to the 0 (Home) menu, and then touch [X] to close the menu.
Wi-Fi Connection and Settings Glossary This is a glossary of some of the basic terms used frequently in this chapter. The documentation for your access point may also contain a glossary you can refer to. Access Point A wireless access point (WAP) is a device that allows wireless devices, like your camcorder, to connect to a wired network (including to the Internet) using the Wi-Fi standard. In most cases, this will be your wireless router.
Additional Information Appendix: Menu Options Lists 212 This section contains tables of all the camcorder’s menu settings and setting options for your reference. Appendix: Onscreen Icons and Displays 236 This section explains the icons and displays that appear on the camcorder’s various screens, with reference pages to the relevant functions. Trouble? 245 Consult the troubleshooting advice and list of messages when you are experiencing some trouble with your camcorder.
Appendix: Menu Options Lists Appendix: Menu Options Lists The functions that are available depend on the camcorder’s operating mode. On the camcorder’s screen, menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus (A 42). For details about each function, see the reference page. Menu options in blue and bold type, like this, indicate default values.
Appendix: Menu Options Lists Menu item Setting options [9 Baby Album] (A 66) [ Video Snapshot] (A 66) e [— Wi-Fi] (A 173) [6 Camera Connect], [7 To Web Service], [w Check/Edit Settings] ■ [1 Other Settings] Menus p Camera Setup (recording mode only) Menu item Setting options [Self Timer] (A 215) [i On <], [j Off] [Zoom Speed] (A 215) [Y Variable], [Z Speed 3], [[ Speed 2], [] Speed 1] [Zoom Position at Startup] (A 215) [Full Wide Angle], [Last Used Position] [Framing Assistance] (A 62) [k Au
Appendix: Menu Options Lists p Camera Setup (recording mode only) (cont.
Appendix: Menu Options Lists [Self Timer]: You can have the camcorder start recording after a 10second countdown. After setting [Self Timer] to [i On <], press Y to start the countdown and record video or touch [{] to start the countdown and take a photo. • This function is not available when the shooting mode is set to 9. • Once the countdown has begun, any of the following actions will cancel the self timer. - Pressing Y when recording movies; touching [{] when recording photos.
Appendix: Menu Options Lists • Using focus assistance will not affect the recordings. It will be cancelled automatically after 4 seconds or when you start recording. • This function is available only when the shooting mode is set to , †, ƒ or ’. • This function is available only for recording movies. [Auto Backlight Correction]: When this setting is set to [i On], the camcorder automatically corrects for backlight conditions when shooting subjects with a strong light source behind them.
Appendix: Menu Options Lists [Image Stabilizer]: The image stabilizer reduces camcorder blur (blur due to the camcorder moving) so you can get nice, stable shots. Select the image stabilization mode according to the shooting conditions. [ Dynamic]: Compensates for a higher degree of camcorder shake, such as when shooting while walking, and is more effective as the zoom approaches full wide angle. Available only when 2 > [Zoom Type] is set to [ Optical].
Appendix: Menu Options Lists / s Playback Setup (playback mode only) (cont.) Menu item Setting options [Slideshow Transition] (A 218) [j Off], [k Dissolve], [l Slide Image] [Video Snapshot Length] (A 126) [C 2 sec], [D 4 sec], [F 8 sec] [Slideshow Transition]: You can select the transition effect between photos in a slideshow. [k Dissolve]: The currently displayed photo fades away while the next photo fades in. [l Slide Image]: Photos slide to the left as the slideshow advances.
Appendix: Menu Options Lists t Display Setup (cont.) Menu item Setting options [LCD Brightness] (A 220) [LCD Backlight] (A 220) [H Bright], [M Normal], [L Dim] [LCD Mirror Image] (A 220) [i On], [j Off] [HDMI Status] (A 220) [Demo Mode] (A 220) [i On], [j Off] [TV Type] (A 221) [+ 4:3 TV], [, Wide TV] [Onscreen Markers] (recording mode only): While recording, you can display a grid or a horizontal line at the center of the screen.
Appendix: Menu Options Lists [Output Onscreen Displays]: When this setting is set to [i On], the camcorder’s onscreen displays will appear also on the screen of a TV or monitor connected to the camcorder. [LCD Brightness]: Adjusts the brightness of the LCD screen. • Changing the brightness of the LCD screen does not affect the brightness of your recordings or the brightness of the playback image on a TV. [LCD Backlight]: Sets the screen to one of three brightness levels.
Appendix: Menu Options Lists • To cancel the demo mode once it has started, press any button or turn off the camcorder. [TV Type] (playback mode only): When you connect the camcorder to a TV using the optional STV-250N Stereo Video Cable, select the setting according to the type of TV in order to display the picture in full and in the correct aspect ratio. [+ 4:3 TV]: TV sets with 4:3 aspect ratio. [, Wide TV]: TV sets with 16:9 aspect ratio.
Appendix: Menu Options Lists q System Setup Menu item Setting options [Language H] (A 34) [ ], [Dansk], [Deutsch], [ ], [English], [Español], [Français], [Italiano], [Magyar], [Melayu], [Nederlands], [Norsk], [Polski], [Português], [ ], [Suomi], [Svenska], [Türkçe], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ] [Time Zone/DST] (A 37) ["] (home time zone) or [#] (travel time zone): [Paris], list of world time zones [$] (DST adjustment): Toggle on or off [Date/Time] (A 34) [Date/Time]: – [Date Format]: [Y
Appendix: Menu Options Lists q System Setup (cont.
Appendix: Menu Options Lists q System Setup (cont.) Menu item Setting options [Displayed Units] (A 227) [. Meters/Grams], [/ Feet/Pounds] [File Numbering] (A 227) [m Reset], [n Continuous] [Auto Power Off] (A 228) [i On], [j Off] [Power On Using LCD Panel] (A 228) [Enable], [Off] [USB Connection Type] [ [ (A 228) Computer], [ Connect Station], Connect and Set] [NFC] (A 182) [i On], [j Off] d [FlashAir]** (A 229) [i On], [j Off] e [Initialize &/8] d [Initialize 8] (A 38) [& Built-in Mem.
Appendix: Menu Options Lists q System Setup (cont.) Menu item Setting options e [Initialize ']* (A 169) [Firmware] (A 229) e [Delete Memory Save Folder]* (A 168) e [MAC Address] (A 229) [Certification Logo Display] (A 229) [Reset All] (A 229) [No], [Yes] * Option available only after connecting an external hard drive to the camcorder. ** Option available only when a FlashAir card is inserted in the camcorder.
Appendix: Menu Options Lists • The information screen displays also the Speed Class rating of the memory card. • e The [Total space] shown for the built-in memory indicates actually usable space. It may be slightly smaller than the nominal built-in memory capacity listed in the specifications. e [External Hard Drive Info] (playback mode only): When the camcorder is connected to an external hard drive, this setting displays information about the hard drive.
Appendix: Menu Options Lists • If the battery pack is exhausted, the battery information may not be displayed. [Displayed Units]: In recording mode, this setting selects the units to use for the focusing distance display during manual focus. It also affects the units used in the stamps for height and weight in 9 mode. [File Numbering]: MP4 movies and photos are saved on the memory as files in folders, which are assigned consecutive file numbers. This setting determines how files are numbered.
Appendix: Menu Options Lists • The file number and folder name also indicate the location of the file on the memory. A recording with the file number “101-1234”, made on October 25 will be found in the folder DCIM\101_1025. If it is an MP4 movie, its file name will be MVI_1234.MP4; if it is a photo, its file name will be IMG_1234.JPG. [Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 3 minutes.
Appendix: Menu Options Lists d [FlashAir]: Determines the operation mode of the wireless communication of the FlashAir card in the camcorder. [Firmware] (recording mode only): You can verify the current version of the camcorder’s firmware, which is the software that controls the camcorder. This menu option is usually unavailable. e [MAC Address]: Displays the camcorder’s unique MAC (media access control) address.
Appendix: Menu Options Lists ■ [3 Recording Setup] Menu (recording mode only) Menu item Setting options [Movie Format] (A 80) [· AVCHD], [¸ MP4] [Video Quality] (A 80) When [Movie Format] is set to [· AVCHD]: [ª 50P Recording], [© High Quality]*, [¨ Standard (Full HD)]*, [¥ Long Play]* When [Movie Format] is set to [¸ MP4]: [ 50P Recording], [ High Quality], [ Standard (Full HD)], [ Long Play] * For these settings also [I] ([Frame Rate]): [μ], [¸] e [Recording Media] (A 82) [Rec Media for Movies]: [
Appendix: Menu Options Lists ■ [2 Main Functions] Menu (recording mode only) Button Setting options/Function [¦ Video Snapshot] (A 107) [ON], [OFF] [— Audio Scene] (A 121) [‘ Standard], [’ Music], [‚ Speech], [“ Forest and Birds], [” Noise Suppression] [Ò Decoration] (A 99) [Ó Pens and Stamps], [× Animated Stamps], [& Date/Time] or [9] (Baby mode stamps), [Ü] (image mix), [Ý] (pause live video), [ß] (minimize toolbar) [ Slow & Fast Motion] (A 94) [Off], [Entire Scene], [Flexible] When set to [Enti
Appendix: Menu Options Lists Button Setting options/Function [Zoom Type] (A 232) [ Optical], [ Advanced], [ [ Digital]) [W] (tele macro): Toggle on or off Digital] (h only: [È Powered IS] (A 233) [ON], [OFF] [z Pre REC] (A 233) [ON], [OFF] [< Focus] (A 115) [D] (manual focus): Toggle on or off, Touch AF frame [y Exposure] (A 113) [n] (manual exposure): Toggle on or off, Touch AE frame [ä Mic.
Appendix: Menu Options Lists [ Advanced]: With advanced zoom the maximum magnification ratio is 57x. At full wide angle, the angle of view with advanced zoom is wider than the angle of view with optical zoom. [ Digital] (h [ Digital]): With digital zoom (light blue area on the zoom bar), the image is processed digitally so image quality will deteriorate the more you zoom in. • This function is available only when the shooting mode is set to , †, ƒ or ’.
Appendix: Menu Options Lists - Leaving the camcorder without any operation for 5 minutes. - Turning off the camcorder, pressing ], changing the shooting mode, etc. - Activating video snapshot or slow & fast motion recording mode. - Opening the 0 > [3 Recording Setup] > [Movie Format], [Video Quality] or [Recording Media] screen. - Opening the 2 (or 0 > [2 Main Functions]) > [— Audio Scene], [R Faders] or [Ä White Balance] screen.
Appendix: Menu Options Lists [Edit] Menu (playback mode only) Button Setting options e [Copy (&'8)] (A 140) Depending on the index screen: or , [Select], [All Scenes] or [All Photos] In single photo view: [¨ Proceed] (copies the current photo) e [Convert to MP4 (&'8)] d [Convert to MP4] [Delete] (A 143) (A 75) Depending on the index screen: or , [Select], [All Scenes] or [All Photos] During playback pause: [This Scene] In single photo view: [¸ Proceed] (deletes t
Appendix: Onscreen Icons and Displays Appendix: Onscreen Icons and Displays The following tables show the icons that appear in the various modes. For easy reference, the icons in the table are grouped according to the area in which they appear on the screen. Please note that what icons appear depends on the movie format, shooting mode, and other functions. For details about each function, see the reference page.
Appendix: Onscreen Icons and Displays When using flexible slow & fast motion recording mode: Top of the screen Icon 9, ó, ƒ, ’ Description/Function , †, Shooting mode button (in N mode: one of the Smart AUTO icons, in ƒ mode: one of the Special Scene mode icons) A 84 58 90 0:00:00 Scene counter (hours : minutes : seconds). Advances only while recording.
Appendix: Onscreen Icons and Displays Top of the screen (cont.) Icon Ä, Ã , Â, è, é, ê, ë, , 000 min {Ð&*, {Ð8 Description/Function A Intelligent IS (only in N mode) 59 Remaining battery charge 244 Zoom bar (momentarily, only when operating the zoom). 60 Photo shooting and memory selected for recording photos (momentarily after taking a photo). In case of a card error, 9 will be displayed (in red) and the photo will not be recorded. 55 * e only.
Appendix: Onscreen Icons and Displays Left side of the screen (cont.) Icon Description/Function A T, V Faders 111 ¼, É, Å White balance 117 d FlashAir card. In case of a FlashAir card error, will be displayed. Check the FlashAir card. 229 Slow/fast motion rate buttons for slow and fast motion recording of part of a scene (flexible slow & fast motion recording).
Appendix: Onscreen Icons and Displays Info panel (cont.) Icon Description/Function A Memory selected for recording movies and remaining recording time on the memory. &0h00m*, 80h00m As the remaining recording time decreases, the icon will change from green to yellow and then red. • When the remaining recording time is 30 minutes or less, this indicator will keep being displayed on the main screen even when you close the info panel.
Appendix: Onscreen Icons and Displays Bottom of the screen Icon Description/Function A { [{] button: Take a photo 55 FILTER 1 to FILTER 5 [FILTER] button: Change the cinema-look filter 88 Custom button: The icon in the button will change depending on the currently assigned function/setting. 226 Focus and exposure locked (momentarily while taking a photo) 55 [ 108 (default) 2, Ò ] button: Cancel the tracking function Audio level indicator 234 [2] button: Open the [2 Main Functions] menu.
Appendix: Onscreen Icons and Displays ■ Playback mode (during playback) Top of the screen Icon Edit, C Description/Function A [Edit] button: Open the [Edit] menu. Lock files function activated. 235 70 Scene shot with the shooting mode set to . 87 Ð, Ý, Ö, Õ, Ø, Memory card operation ×, Ô, Ó 244 d FlashAir card. In case of a FlashAir card error, will be displayed. Check the FlashAir card.
Appendix: Onscreen Icons and Displays Top of the screen (cont.) Icon Description/Function 000 Scene number 000-0000 File number A – 227 * e only.
Appendix: Onscreen Icons and Displays Bottom of the screen (cont.) Icon Description/Function A ¦ [¦] button: Capture a video snapshot scene 126 00:00 AM 1.Jan.2017 Recording date and time 219 Memory card operation Ü Recording, Ñ Record standby, z Pre-recording (A 233), Ð Playback, Ý Playback pause, × Fast playback, Ø Fast reverse playback, Õ Slow playback, Ö Slow reverse playback, Ó Frame advance, Ô Frame reverse.
Trouble? Trouble? Troubleshooting If you have a problem with your camcorder, refer to this section. Sometimes what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the more detailed problems and solutions. Consult a Canon Service Center if the problem persists.
Trouble? Power Source The camcorder will not turn on or it turns off by itself. - The battery pack is exhausted. Replace or charge the battery pack. - Remove the battery pack and insert it correctly. Cannot charge the battery pack. - Make sure the camcorder is off so charging can start. - The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C). Remove the battery pack, warm it or let it cool down, as necessary, and try charging it again.
Trouble? Recording Pressing Y will not start recording. - You cannot record while the camcorder is writing previous recordings in the memory (while the ACCESS indicator is on or flashing). Wait until the camcorder has finished. - The memory is full or it already contains the maximum number of AVCHD scenes (3,999 scenes). Delete some recordings (A 75) or initialize the memory (A 38) to free some space. - The file numbers for MP4 movies and photos have reached their maximum value.
Trouble? Movies or photos cannot be recorded properly. - This may occur as movies and photos are recorded/deleted over time. Save your recordings (A 157) and initialize the memory using the [Complete Initialization] option (A 38). Cannot record a photo while recording movies. - You cannot take photos when the shooting mode is set to – or †, or while fading in or fading out a scene (A 111). After using the camcorder for a long time, it becomes hot.
Trouble? When playing back scenes/slideshow with background music, the music track is not played back correctly. - This can occur when you transfer the music files to a memory after repeatedly recording and deleting scenes (fragmented memory). Recordings in the built-in memory (e only): Initialize a memory card with the camcorder using the [Complete Initialization] option (A 38).
Trouble? Indicators and Onscreen Displays appears (in red) on the screen. - Battery pack is exhausted. Replace the battery pack with a fully charged one. appears (in red) on the screen. - The camcorder cannot communicate with the battery pack attached so the remaining battery charge cannot be displayed. appears (in red) on the screen. - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card if the display does not change back to normal.
Trouble? Picture and Sound A rattling can be heard from the camcorder. - If it cannot be heard while the camcorder is set to recording mode, then the rattling is due to the movement of the internal lens fixture. This is not a malfunction. The screen appears too dark. - The LCD screen was dimmed. Change the 1 > t > [LCD Backlight] setting to [Normal] or [Bright]. The image on the screen appears too dark.
Trouble? Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. This is not a malfunction. Adjust the audio recording level manually (A 234). The picture is displayed correctly but there is no sound from the built-in speaker. - Speaker volume is turned off. Adjust the volume (A 69).
Trouble? - A compatible memory card must be used to be able to record movies on a memory card (A 30). - The folder and file numbers for MP4 movies and photos have reached their maximum value. Insert a new memory card and set 1 >q> [File Numbering] to [Reset]. Connections with External Devices Video noise appears on the TV screen. - When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the power or antenna cables of the TV.
Trouble? - Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again and restore the connection. - Connect the camcorder to a different USB port on the computer. CameraWindow DC does not start automatically. - CameraWindow DC does not start automatically on some versions of Mac OS X. In such case, click the Camera-Window icon in the dock to launch the software.
Trouble? e Wi-Fi Functions Refer also to the instruction manual of the access point and other devices you will use. Cannot connect with the access point. - Check that the access point is working correctly. - The effective communication range between the camcorder and access point may vary depending on the strength of the wireless signal. Try using the camcorder closer to the access point.
Trouble? Cannot complete a wireless connection to the camcorder. - Resetting the camcorder’s settings using 1 > q > [Reset All] will reset the camcorder’s network name and passwords. Erase the camcorder’s previous network settings from the iOS or Android device and connect the device to the camcorder again.
Trouble? List of Messages (in alphabetical order) e In the following pages you can find subsections dedicated to messages that appear when using an external hard drive (A 268), Wi-Fi functions (A 268) or Web services (A 274). Back up recordings regularly - This message may appear when you turn on the camcorder. In the event of a malfunction, recordings may be lost so save your recordings regularly (A 157). e Built-in memory error - The built-in memory could not be read. Contact a Canon Service Center.
Trouble? Cannot communicate with the battery pack. Continue using this battery pack? - You attached a battery pack that is not recommended by Canon for use with this camcorder. - If you are using a battery pack recommended by Canon for use with this camcorder, there may be a problem with the camcorder or battery pack. Consult a Canon Service Center. Cannot convert scenes recorded at 50P - Scenes that were recorded at 50P cannot be converted to MP4 format or to fast motion scenes (e only).
Trouble? Cannot divide the scene - The scene could not be divided because the camcorder’s internal scene management data log is full. Delete some scenes and photos (A 75) and try dividing the scene again. Cannot load canvas - The canvas file that was saved in the memory is corrupted. - Canvas data cannot be read from canvas files created using other devices and then transferred to a memory card connected to the computer.
Trouble? Cannot play the movies on this memory card - Movies cannot be played back from a 64 MB or smaller memory card. Use a recommended memory card (A 30). Cannot play the movies on this memory card Initialize only using the camcorder - The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder (A 38).
Trouble? Cannot record movies on this memory card - Movies cannot be recorded on a 64 MB or smaller memory card. Use a recommended memory card (A 30). Cannot record movies on this memory card Initialize only using the camcorder - The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder (A 38). Cannot save the canvas - Cannot save your [Pens and Stamps] drawings in the memory. Save your recordings (A 157) and initialize the memory (A 38).
Trouble? Check the memory card - Cannot access the memory card. Check the memory card and make sure it is inserted correctly. - A memory card error occurred. The camcorder cannot record on or read from the memory card. Try removing and reinserting the memory card, or use a different memory card. - You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card (A 30).
Trouble? LCD Screen has been dimmed Use the [LCD Backlight] setting to change the brightness - Change the 1 > t > [LCD Backlight] setting to [Normal] or [Bright]. May not be possible to record movies on this memory card - You may not be able to record movies on a memory card without a CLASS rating or with one rated CLASS 2. Replace the memory card with one rated CLASS 4, 6 or 10. e Mem.
Trouble? Memory card writing error Attempt to recover the data? - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing to the memory card. Select [Yes] to try to recover the recordings. If you inserted a memory card that contains scenes recorded using another device, we recommend that you select [No]. Need to recover files from the memory card. Change the position of the LOCK switch on the memory card.
Trouble? Recording was stopped due to insufficient write speed of the memory card - The data transfer rate was too high for the memory card in use and recording was stopped. Replace the memory card with one rated CLASS 4, 6 or 10 (CLASS 6 or 10 when recording movies with a video quality of 50P or 35 Mbps). - After repeatedly recording and deleting scenes (fragmented memory), it will take longer to write data on the memory card and recording may stop.
Trouble? Some scenes could not be deleted - Movies that were protected/edited with other devices and then transferred to a memory card connected to the computer, cannot be deleted with this camcorder. Task in progress. Do not disconnect the power source. - The camcorder is updating the memory. Wait until the operation ends and do not remove the battery pack.
Trouble? Too many photos and MP4 movies. Disconnect the USB cable. - Disconnect the USB cable. Try using a memory card reader or decrease the number of photos and movies on the memory card to fewer than 2,500 (Windows), or 1,000 (Mac OS) and then restore the connection. - e Copy the photos and MP4 movies to a memory card and try using a card reader. - If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while.
Trouble? e List of Messages for Connecting to an External Hard Drive Error writing to external hard drive - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing to the external hard drive. Select [Yes] to try to recover the recordings. Quickly erases all files and deletes partitions from the external hard drive.
Trouble? Closing the LCD panel turns off the camcorder. File transfers in progress will be interrupted. - Keep the camcorder’s LCD panel open while a wireless file transfer to the optional CS100 Connect Station is in progress. Incorrect Wi-Fi password. - The password (encryption key) is case sensitive so make sure to enter it correctly. Invalid port number. Perform the setting again. - The port number entered cannot be used.
Trouble? No access points found - The access point set in the camcorder could not be found. - To avoid interference, use the camcorder at some distance from devices that emit electromagnetic waves (cordless phones, microwave ovens, etc.). - Make sure that you use the correct access point’s network name (SSID) in the camcorder’s Wi-Fi settings (A 204). - If the access point is using MAC address filtering, enter the camcorder’s MAC address in the access point’s configuration screen.
Trouble? Unable to complete WPS. Try the operation again. - Some access points require pressing and holding the Wi-Fi Protected Setup (WPS) button. For details, refer to the instruction manual of your access point. - Make sure to touch [OK] on the camcorder’s screen within 2 minutes of activating the Wi-Fi Protected Setup signal on the access point, whether by pressing the button or by entering the PIN code. Unable to connect to the Connect Station.
Trouble? Unable to obtain a global IP address. - The access point to which the camcorder is connected has not been assigned a global IP address. Check the WAN settings of the broadband router to see if a global IP address has been assigned. - Several wireless routers are connected to the same home network. Leave only one wireless router to serve as the access point.
Trouble? Wi-Fi connection terminated - To avoid interference, use the camcorder at some distance from devices that emit electromagnetic waves (cordless phones, microwave ovens, etc.). - The camcorder may not be able to connect to the access point if too many devices are accessing it. Wait awhile and try again to establish the connection. Wi-Fi error. Incorrect authentication method. - Make sure the camcorder and access point are using the same authentication/encryption method and password (encryption key).
Trouble? e List of Messages for Web Services Check network settings - The network settings in the camcorder are not correctly configured. Check the connection point, network name (SSID) and other network settings. Connect to a computer and use the dedicated software to set again - An error occurred when connecting to the CANON iMAGE GATEWAY server. Check the settings saved on CANON iMAGE GATEWAY and set them again in the camcorder.
Trouble? Server busy Try again later - The CANON iMAGE GATEWAY server is busy due to a high number of users trying to connect to the server. End the Wi-Fi connection and try again later. This image cannot be sent - You attempted to upload a recording whose file type or file size is not supported by the selected Web service. Check the recording before sending. Try again - There was a problem in the communication with the CANON iMAGE GATEWAY server or the server is temporarily down.
Do’s and Don’ts Do’s and Don’ts Safety Instructions and Handling Precautions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING Denotes the risk of serious injury or death. • Stop using the product in any case of unusual circumstances such as the presence of smoke or a strange smell. • Do not touch any exposed internal parts. • Do not get the product wet.
Do’s and Don’ts - Do not use leaking batteries/battery packs. If a battery/battery pack leaks and the material contacts your skin or clothing, flush the exposed area thoroughly with running water. In case of eye contact, flush thoroughly with copious amounts of clean running water and seek immediate medical assistance. - When disposing of batteries/battery packs, insulate the terminals with tape or other means. This may cause electric shock, explosion or fire.
Do’s and Don’ts • Do not allow the product to maintain contact with the same area of skin for extended periods of time during use. This may result in lowtemperature contact burns, including skin redness and blistering, even if the product does not feel hot. The use of a tripod or similar equipment is recommended when using the product in hot places and for people with circulation problems or less sensitive skin. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth.
Do’s and Don’ts • Save your recordings periodically. Make sure to transfer your recordings to an external device, such as a computer, digital video recorder or the optional CS100 Connect Station (A 157), and save them on a regular basis. This will protect your important recordings in case of damage and create more free space on the memory. Canon shall not be liable for any data loss. • Do not carry the camcorder by the LCD panel. Be careful when closing the LCD panel. • Handle the touch screen with care.
Do’s and Don’ts • e The camcorder’s Wi-Fi functions may be subject to interference from devices such as cordless phones and microwave ovens. Keeping as much distance as possible from these devices or using the camcorder’s Wi-Fi functions at a different time of day may reduce such interference. • Do not point the camcorder toward an intense light source, such as the sun on a sunny day or an intense artificial light source. Doing so may damage the image sensor or the camcorder’s internal components.
Do’s and Don’ts • When recording movies, try to get a calm, stable picture. Excessive camcorder movement while shooting and extensive use of fast zooms and panning can result in jittery scenes. In extreme cases, the playback of such scenes may result in visually induced motion sickness. If you experience such a reaction, stop the playback immediately and take a rest break as necessary.
Do’s and Don’ts ■ Remaining battery time The camcorder uses battery packs that are compatible with Intelligent System. If the remaining battery time displayed is not correct, charge the battery pack fully. Still, the correct time may not be displayed after a large number of repeated uses, if a fully charged battery pack is left unused, or if a battery pack is used for long periods of time in high temperatures. Use the time shown on the screen as an approximation.
Do’s and Don’ts Built-in Rechargeable Lithium Battery The camcorder has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camcorder; however, it will discharge completely if you do not use the camcorder for about 3 months. To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and leave it connected with the camcorder off.
Maintenance/Others Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents such as paint thinner. Lens • If the lens surface is dirty, autofocus may not work properly. • Remove any dust or dirt particles using a non-aerosol type blower brush. Then, use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use tissue paper.
Maintenance/Others • When a cold room is heated rapidly To avoid condensation • Do not expose the camcorder to sudden or extreme changes in temperature. • Remove the memory card and battery pack. Then, place the camcorder and battery pack in an airtight plastic bag and let it adjust gradually to temperature changes before removing it from the bag. When condensation is detected The precise time required for water droplets to evaporate will vary depending on the location and weather conditions.
Maintenance/Others Europe: All of Europe and Russia. Americas: Only in Argentina, Brazil, Uruguay and French territories (French Guiana, Guadeloupe, Martinique, etc.). Asia: Most of Asia (except in Japan, the Philippines, South Korea, Taiwan and Myanmar). Africa: All of Africa and African islands. Australia/Oceania: Australia, New Zealand, Papua New Guinea; most Pacific islands (except for Micronesia, Samoa, Tonga and US territories like Guam and American Samoa).
General Information General Information Optional Accessories The following optional accessories are compatible with this camcorder but their availability may differ from area to area. Select accessories are described in more detail in the following pages. For the latest information, please visit your local Canon website.
General Information UA-100 USB Adapter* CT-V1 Camera Pan Table* CS100 Connect Station SC-2000 Soft Carrying Case * This accessory is used with a function available only on the e.
General Information Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
General Information UA-100 USB Adapter e Allows you to connect to the camcorder an external hard drive or similar storage device with a standard-A cable. After doing so, you can save an entire memory onto the device. Check in advance the USB cable supplied with your external hard drive. SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. This mark identifies genuine Canon video accessories.
General Information Specifications Camcorder LEGRIA HF R88 / LEGRIA HF R87 / LEGRIA HF R86 / LEGRIA HF R806 — Values given are approximate figures. System • Recording System Movies: 1. AVCHD format, compatible with AVCHD Ver. 2.0 Video: MPEG-4 AVC/H.264, Audio: Dolby Digital 2ch 2. MP4 format Video: MPEG-4 AVC/H.264, Audio: MPEG-4 AAC-LC (2ch) Photos: DCF (Design rule for Camera File system), compatible with Exif* Ver. 2.3 Image compression: JPEG * This camcorder supports Exif 2.
General Information • Image Sensor 1/4.85-type CMOS, 3,280,000 pixels Effective pixels: 2,070,000 pixels (1920 x 1080) When advanced zoom is on: 1920 x 1080 (wide angle), 1280 x 720 (full telephoto) • LCD Touch Screen 7.51 cm (3 in.), TFT color, 230,000 dots, capacitive touch screen operation • Microphone: Stereo electret condenser microphone • Lens f=2.8-89.6 mm, F/1.8-4.5, 32x optical zoom, 57x advanced zoom 35 mm equivalent: 38.5 – 1,232 mm 32.5* – 1,853 mm (when advanced zoom is on) * f only: 26.
General Information • White Balance Auto white balance, custom white balance or preset white balance settings: [Daylight], [Tungsten] • Minimum Illumination 0.
General Information • USB Terminal: mini-AB, Hi-Speed USB, output only • HDMI OUT Terminal: HDMI Mini Connector, output only e Wi-Fi • Wireless Standard Complies with the IEEE 802.11b/g/n protocol • Connection Methods Wi-Fi Protected Setup (WPS), search for access points, manual, NFC pairing (with compatible devices) • Wireless Frequency: 2.4 GHz • Supported Channels: 1 - 11 • Encryption Methods: WEP-64/WEP-128, TKIP/AES Power/Others • Power Supply (rated) 3.6 V DC (battery pack), 5.
General Information CA-110E Compact Power Adapter • Power Supply: 100 - 240 V AC, 50/60 Hz • Rated Output / Consumption 5.3 V DC, 1.5 A / 17 VA (100 V) - 23 VA (240 V) • Operating Temperature: 0 - 40 °C • Dimensions: 49 x 27 x 79 mm • Weight: 110 g BP-727 Battery Pack • Battery Type: Rechargeable lithium ion battery • Rated Voltage: 3.6 V DC • Operating Temperature: 0 – 40 °C • Battery Capacity 2,760 mAh (typical); 9.7 Wh / 2,685 mAh (minimum) • Dimensions: 30.3 x 34.2 x 40.
General Information • Weight: 55 g Weight and dimensions are approximate. Errors and omissions excepted. The information in this manual is verified as of January 2017. Specifications and outer appearance are subject to change without previous notice.
Reference Tables Reference Tables Approximate recording times Movie format, quality and resolution 8 GB 16 GB 32 GB 64 GB · 50P (1920 x 1080) 35 min. ¸ 35 Mbps (1920 x 1080) 30 min. · MXP, ¸ 24 Mbps (1920 x 1080) 40 min. 1 hr. 25 min. 2 hr. 55 min. 5 hr. 55 min. · FXP, ¸ 17 Mbps (1920 x 1080) 1 hr. 2 hr. 5 min. 4 hr. 10 min. 8 hr. 20 min. · LP (1440 x 1080) 3 hr. 6 hr. 5 min. 12 hr. 15 min.2 24 hr. 30 min.2 4 hr. 20 min. 8 hr. 40 min. 17 hr. 20 min.2 34 hr. 45 min.
Reference Tables 2 A single scene can be recorded continuously for 12 hours; at that point, the camcorder will stop for about 3 seconds. After that, recording will continue as a separate scene. Approximate number of photos available on a 4 GB memory card The numbers given in the following table are approximate and vary according to recording conditions and the subject.
Reference Tables - A fully charged battery pack was used. - Recording in FXP mode (AVCHD format) or at 17 Mbps (MP4 format) in the built-in memory (e only). For operations on the memory card, usage times may be up to approx. 5 minutes shorter. - LCD at normal brightness. - Typical recording times measure recording with repeated operations such as start/stop recording and power on/off. Actual times will vary according to the recording configuration used and charging, recording or playback conditions.
Reference Tables Downloading Music Files and Image Files (Image Mix Frames) Canon offers for download music files for use as background music and image files (image mix frames) for the image mix function. Access the following website, click on your country/region and follow the onscreen instructions to download the files. www.canon.com/icpd About the music files The specifications of the music files compatible with the camcorder are as follows.
Reference Tables About the image files for the Image Mix function • To use the image mix function while recording on a memory card, use a card reader to copy the image files from your computer to the following folders on the memory card, depending on the shooting mode you want to use. Image mix frames that can be used only in 9 mode: CANON\PRIVATE\MY_PICT\BABY\ Image mix frames that can be used only in other modes: CANON\PRIVATE\MY_PICT\ • The camcorder can recognize image files named MIX_01.JPG to MIX_99.
Index 50P recording ..................... 80 A Abroad, using the camcorder ..................... 285 Aspect ratio of a connected TV (TV type) .................... 221 Audio recording level .......... 234 Audio scenes .................... 121 AUTO mode ....................... 57 Auto slow shutter .............. 216 Automatic backlight correction ...................... 216 AV OUT/× terminal ...150, 153 B Baby (shooting mode)........... 86 Baby album ........................ 66 Background music .....
Cinema-look filters .......88, 143 Condensation ................... 284 Connect Station* .......164, 192 Connections to external devices .......................... 151 Converting scenes to fast motion (time-lapse) scenes* ....................... 147 to MP4/smaller MP4 scenes ........................ 143 Copying recordings to a memory card*............... 140 F D G Date and time ..................... 34 Decoration ......................... 99 Deleting recordings .............. 75 Dividing scenes ........
I Image mix ........................ 105 Image mix frames (download) ..................... 300 Image stabilizer ................. 217 Index screen button ............. 68 Info panel ...................54, 239 Initializing the memory .......... 38 Intelligent IS ........................ 59 L Language .......................... 34 LCD screen brightness ....... 220 LCD touch screen................ 41 Locking files ....................... 70 Low light (Special Scene mode) .............................
R Recording Movies ............................ 51 Photos ............................ 55 Recording time.................. 297 Reference tables (charging, usage and recording times, etc.) .............................. 297 Relay recording* .................. 83 Remote Control+ Streaming* ..................... 178 Resetting all camcorder settings ......................... 229 S Saving recordings .............. 157 Scene (shooting mode) ......... 90 SCN (Special Scene shooting mode) .................
U W Uploading recordings to the Web* ....................... 195 USB terminal ............150, 154 Web services* ...................196 White balance ...................117 Wide angle .........................60 Wide attachment*** ..............65 Wi-Fi functions* .................173 V Video quality ....................... 80 Video snapshot ...............107, 126 View assistance (for mode) ................. 225 Volume .............................. 69 Y YouTube* ................
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands http://www.canon-europe.com USA http://pro.usa.canon.com CANON U.S.A., INC. http://pro.usa.canon.com/support (855) CINE-EOS (855-246-3367) (USA only) UNITED KINGDOM Canon UK Ltd Unit 160, Centennial Park, Centennial Avenue, Elstree, Hertfordshire, WD6 3SG 020-7660-0186 © CANON INC. 2017 PUB.