Operation Manual
Entering Sleep Mode
1W2Y-033
The sleep mode function r
educes the amount of power consumed by the machine by disabling power ow to the
operation panel. If no operations will be performed on the machine for a while, such as during a lunch break, you can
save power simply by pressing
on the operation panel.
When in sleep mode
● When the machine enters sleep mode, lights up yellow green.
Situations in which the machine does not enter sleep mode
● When the machine is in oper
ation
● When the Data indicator is lit up or blinking
● When the machine is performing an operation such as adjustment or cleaning
● When a paper jam occurs
● When the menu screen is displayed
● When an error message is displayed on the screen (There are some exceptions. The machine sometimes
enters sleep mode when an error message is displayed.)
● When the SSID/network key screen for Direct Connection is displayed
● When settings are being imported or exported
Changing the Auto Sleep Time Value
Auto Sleep Time is a function that automatically puts the machine into the sleep mode if it remains idle for a
specied length of time. W
e recommend using the factory default settings (
<Timer/Energy
Settings>(P. 300) ) to reduce power usage. If you want to change the amount of time that elapses before the
machine enters the auto sleep mode, perform the procedure below.
<Menu> <Preferences> <Timer/Energy Settings> <Auto Sleep Time> Set the amount of
time that elapses befor
e the machine automatically enters sleep mode
<Apply> ( )
Changing the Sleep Mode Setting to the Specied Time
You can congur
e a setting so that the machine is placed into the sleep mode at the specied time. You can also
congure a setting so that the sleep mode is released at the specied time.
Basic Operations
162