Operation Manual
2
Select the [Respond to Discovery] check box and specify the required settings.
[Respond to Discovery]
Select the check box to set the machine to respond to device management software multicast discovery
packets and enable monitoring by device management software. If you do not want to set the machine to
respond, clear the check box.
[Scope Name]
To include the machine into a specic scope, enter up to 32 characters for the scope name.
3
Click [OK].
Notifying a device management software of the power status of the machine
1
Click [Edit] in [Sleep Mode Notication Settings].
2
Select the [Notify] check box and specify the required settings.
Network
239