User`s guide

5-12
Printing Environment Settings
5
SETUP Menu Settings
If CONT.PRINTING is specified, the printer continues printing, displaying the
above message. If STOP PRINTING is specified, the printer stops printing. Then,
the printer resumes printing after you release the printer from the Warning status
according to the displayed message.
NOTE
• If <16 CHECK TONER> appears, and the printer stops printing, replace the toner
cartridge, and then print again.
• If STOP PRINTING is specified for this item, the message <16 PREPARE TONER>
changes to <16 CHECK TONER>, and the printer stops printing.
AUTO ERROR SKIP
OFF*, ON
Specifies whether the printer should automatically use the function that, when an
error has occurred, releases the printer from the error temporarily (Error Skip) and
continues the job.
If OFF is specified, you need to skip the error by pressing [Online].
If ON is specified, the printer skips the error automatically without you pressing
[Online].
NOTE
• The Error Skip function is only for skipping an error temporarily. Therefore, the data
may not be printed properly.
• For the types of error from which the printer can be released temporarily, see
"Message List," on p. 7-22.
• If ON is specified for this item, the printer automatically skips all the errors it can
skip automatically even when multiple errors are occurring.
PANEL LANGUAGE
ENGLISH*, FRENCH, GERMAN, ITALIAN, SPANISH
Confirm the language that is displayed in the display.
SHOW WARNINGS
CHECK TONER ................... ON*, OFF
CASSETTE EMPTY............. ON*, OFF
A Warning status is a status in which the printer requires some remedy although
the job is not affected. When the printer is in this status, a message appears in the
display, or an indicator blinks.
This item allows you to specify whether a message should appear or any indicator
should blink when the printer is in either of the following Warning status.