All in One Printer User Manual

Setting Up Coded Speed Dialing

2-22

Using Speed Dialing

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0

If you want to turn ECM (Error Correction Mode) ‘ON’ or ‘OFF’,

press [

▼] or [▲] until <6.ECM> appears ➞ press [Set].

NOTE

ECM (Error Correction Mode) reduces system and line errors during sending or

receiving with another fax machine that supports ECM. If the other fax machine

does not support ECM, this setting is ignored. If the transmission speed appears to

be extremely slow, you may be able to speed up the transmission time by turning

the ECM ‘OFF’.

Press [▼] or [▲] to select ‘ON’ or ‘OFF’ ➞ press [Set].

If you want to select a telephone line for outgoing fax

transmissions, press [

▼] or [▲] until <7.TX LINE SELECTION>

appears ➞ press [Set].

If you do not want to perform this setting, proceed to step 28.

NOTE

This setting becomes available only when the optional Dual-Line Upgrade Kit is

installed on your machine.

Press [▼] or [▲] to select <AUTO> or <FIXED> ➞ press [Set].

<AUTO>: The machine uses the available telephone line for outgoing fax

transmissions.

<FIXED>: The machine uses only the telephone line you select here for

outgoing fax transmissions.

●

If you select ‘AUTO’:

❏ Proceed to step 28.

➞

Set