All in One Printer User Manual

Setting a Document on the Machine

5-4

Using the Machine as a Copier

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0

IMPORTANT

Do not set the document guides so tight against the sides of the document, that the

document bends.

Make sure the documents are below the load limit marks for

A4/LTR or B4/LGL sizes.

Insert the documents fully into the feeder until the leading

edges of the documents stop.

The following messages appear on the LCD display:

NOTE

If the machine already displays <DOCUMENT READY> before you set your

document, a small-sized document, such as a STMT document, may have

remained in the automatic document feeder from a previous fax or copy job. In

such a case, remove the small-sized document from the automatic document

feeder, and set your document. (See Chapter 7, “Troubleshooting,” in the

Reference Guide.)