All in One Printer User Manual

Sending a Document with a Subaddress/Password
3-34
3
Sending Documents
CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0
1 Place your documents on the machine.
For instructions explaining how to place your documents, see “Setting the
Document on the Machine,” on p. 3-3.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
“Adjusting the Scan Settings,” on p. 3-4.)
• You can also specify a sender’s name with [TTI Selector]. (See “Selecting a
Sender’s Name,” on p. 3-6.)
2 Specify the destination ➞ press [Set].
You can specify the destination using regular dialing, one-touch speed dialing,
coded speed dialing, access code dialing, or directory dialing. (See “Using
Regular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32, or “Using
Directory Dialing,” on p. 2-39.)
3 Immediately after pressing [Set] on step 2, open all three
one-touch speed dialing panels
➞ press [Subaddress].
NOTE
You must press [Subaddress] within five or ten seconds (depending on the dialing
method you use) of pressing
(Set) in step 2. If you wait longer than the timeout
interval before pressing [Subaddress], the machine starts to scan the documents.
The timeout interval can be turned ‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)
Set
Subaddress
Set