User's Manual

Advanced Printing

 Connecting to a Digital Camera

Do not connect any equipment other than the camera ready for PictBridge

or Canon Bubble Jet Direct to the Direct Print Port of the printer. If you do

so, electric shock, fire, or damage to the camera could result.

z When printing photos with the digital camera connected to the printer,

it is advisable to use the AC adapter supplied with the camera. If you

use the camera battery, be sure to charge it fully.

z The Print Head cannot be aligned using the controls of the digital

camera. The print head alignment can be performed simply by pressing

the R

ESUME/CANCEL button on the printer, or by connecting the

printer to the computer and then executing automatic print head

alignment. Refer to “A

ligning the Print Head” on page 61.

z Depending on the model or brand of your camera, you may have to

select a print mode compliant with PictBridge before connecting the

camera.

You may also have to turn on the camera or select Play mode manually

after connecting the camera to the printer.

Perform necessary operations according to the instruction manual

supplied with your camera.

z When printing from your PC, be sure to unplug the cable connecting the

digital camera.

1 Set up the printer.

2 Turn on the printer.

See “T

urning on the Printer” on page 2.

3 Load the paper in the printer.

See “L

oading Paper” on page 3.

4 Connect the digital camera to the printer.

(1) Make sure the camera is turned off.

(2) Connect the camera to the printer using the USB cable (for connection to a

computer) supplied with the camera.