Camera User Guide • Make sure you read this guide, including the “Safety Precautions” section, before using the camera. • Reading this guide will help you learn to use the camera properly. • Store this guide safely so that you can use it in the future.
Checking the Package Contents Check if the following items are included in your camera package. If anything is missing, contact the retailer where you purchased the camera. Camera Battery Pack NB-4L (with Terminal Cover) Interface Cable IFC-400PCU AV Cable AVC-DC400 Getting Started DIGITAL CAMERA Solution Disk Battery Charger CB-2LV/CB-2LVE Wrist Strap WS-DC11 Warranty System Booklet Using the Manuals Also refer to the manuals on the DIGITAL CAMERA Manuals Disk.
Read This First Test Shots and Disclaimer Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
What Do You Want to Do? 4 Shoot Shoot, leaving it to the camera to make settings .........................24 Take good people shots I Portraits (p. 64) V Kids and pets (p. 64) Facial expressions (p. 81) Shoot various other scenes Night Scene (p. 65) Low Light (p. 65) S Underwater (p. 65) w At the beach (p. 65) O Foliage (p. 65) P Against snow (p. 66) t Fireworks (p. 66) Shoot with special effects Fish-eye Effect (p. 69) Miniature Effect (p. 70) Monochrome (p.
What Do You Want to Do? View 1 Look at my pictures ......................................................................27 Automatically play back pictures (slideshow).............................122 Look at my pictures on a TV ......................................................130 Look at my pictures on a computer. .............................................32 Quickly search pictures ..............................................................118 Erase pictures ......................
Table of Contents Chapters 1 – 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter. Checking the Package Contents .......2 Read This First ..................................3 What Do You Want to Do? ................4 Conventions Used in This Guide .......9 Safety Precautions...........................10 1 Getting Started................... 13 Charging the Battery.......................
Table of Contents 5 Choosing Settings Yourself...............................83 Shooting in Program AE ................. 84 Adjusting the Brightness (Exposure Compensation) ............ 85 Turning the Flash On ...................... 85 Adjusting the White Balance ........... 86 Changing the ISO Speed ................ 88 Correcting the Brightness and Shooting (i-Contrast)..................... 89 Changing the Aspect Ratio ............. 90 Continuous Shooting.......................
Table of Contents Choosing Images for Printing (DPOF) ........................................159 9 Customizing Camera Settings ............................ 165 Changing Camera Settings............166 Changing Shooting Function Settings........................................173 Changing Playback Function Settings........................................176 10 Useful Information ......... 177 Using Household Power ................178 8 Using an Eye-Fi Card.................... 179 Troubleshooting .......
Conventions Used in This Guide • Icons are used in the text to represent the camera buttons and switches. • Language that displays on the screen appears inside [ ] (square brackets). • The directional buttons and FUNC./SET button are represented by the following icons. Up button Left button FUNC./SET button Right button Down button • : Things you should be careful about • : Troubleshooting tips • : Hints for getting more out of your camera • : Supplemental information • (p.
Safety Precautions • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death.
Safety Precautions • Turn the camera off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities. • Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.
Safety Precautions • In regular use, small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit. • Remove and store the battery when you are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur.
1 Getting Started This chapter explains preparations before shooting, how to shoot in A mode, and then how to view and erase the images you take. The latter part of this chapter explains how to shoot and view movies and transfer images to a computer. Attaching the Strap/Holding the Camera • Attach the included strap and wrap it around your wrist to avoid dropping the camera during use. • Keep your arms tight against your body while holding the camera firmly by the sides when shooting.
Charging the Battery Use the included charger to charge the battery. Be sure to charge the battery as it is not charged at the time of purchase. Remove the cover. Insert the battery. Align the o marks on the battery and charger, then insert the battery by sliding it in ( ) and down ( ). Charge the battery. For CB-2LV: Flip out the plug ( ) and plug the charger into a power outlet ( ). For CB-2LVE: Plug the power cord into CB-2LV CB-2LVE the charger, then plug the other end into a power outlet.
Charging the Battery Number of Possible Shots Number of Shots Approx. 230 Playback Time Approx. 5 hours • The number of shots that can be taken is based on the Camera & Imaging Products Association (CIPA) measurement standard. • Under some shooting conditions, the number of shots that can be taken may be less than mentioned above. Battery Charge Indicator An icon or message will appear on the screen indicating the battery’s charge state. Display Summary Sufficient charge.
Compatible Memory Cards (Sold Separately) The cards below can be used without restrictions on their capacities. • SD memory cards* • SDHC memory cards* • SDXC memory cards * • MultiMediaCards • MMCplus memory cards • HC MMCplus memory cards • Eye-Fi Cards * This memory card complies with the SD standards. Some cards may not operate properly depending on the brand of card used.
Inserting the Battery and Memory Card Insert the battery. Press the battery lock in the direction of the arrow, then insert the battery as shown until it locks into place with a click. Be sure to insert the battery in the correct direction or it will not properly lock into place. Terminals Battery lock Insert the memory card. Insert the memory card as shown until it locks into place with a click. Be sure the memory card is oriented correctly.
Inserting the Battery and Memory Card Removing the Battery and Memory Card Remove the battery. Open the cover and press the battery lock in the direction of the arrow. The battery will pop up. Remove the memory card. Push the memory card in until you hear a click, then slowly release it. The memory card will pop up. Number of Shots per Memory Card Memory Card Number of Shots 4 GB Approx. 1231 16 GB Approx. 5042 • Values are based on the default settings.
Setting the Date and Time The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them. Turn on the camera. Press the ON/OFF button. The Date/Time screen will appear. Set the date and time. Press the qr buttons to choose an option. Press the op buttons to set a value. Complete the setting. Press the m button.
Setting the Date and Time Changing the Date and Time You can change the current date and time settings. Display the menu. Press the n button. Choose [Date/Time]. Move the zoom lever to choose the 3 tab. Press the op buttons to choose [Date/ Time], then press the m button. Change the date and time. Follow Steps 2 and 3 on p. 19 to adjust the setting. Press the n button to close the menu.
Setting the Display Language You can change the language that displays on the screen. Enter Playback mode. Press the 1 button. Display the settings screen. Press and hold the m button, then immediately press the n button. Set the display language. Press the opqr buttons to choose a language, then press the m button. Once the display language has been set, the settings screen will close.
Formatting Memory Cards Before you use a new memory card or one that has been formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Before formatting an Eye-Fi card (p. 179), be sure to install the software contained on the card to a computer. Display the menu. Press the n button. Choose [Format].
Pressing the Shutter Button Complete formatting. When formatting ends, [Memory card formatting complete] will appear on the screen. Press the m button. Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks.
Taking Pictures (Smart Auto) Does the length of the shutter sound change? • Since the time required to shoot differs depending on the scene you want to take, the length of the shutter sound may change. • If the camera or subject moves while the shutter sound is playing, the recorded image may be blurry. If you shoot without pressing the shutter button halfway, the image may not be in focus.
Taking Pictures (Smart Auto) Compose the shot. Moving the zoom lever toward i Zoom bar (telephoto) will zoom in on your subject, making it appear larger. Moving the lever toward j (wide angle) will zoom out from your subject, making it appear smaller. (The zoom bar showing the zoom position appears on the screen.) Focus. Press the shutter button halfway to focus. When the camera focuses, it will beep twice and AF frames will appear where the camera focused.
Taking Pictures (Smart Auto) What if... • What if the color and brightness of the images do not turn out as expected? The scene icon (p. 187) that appears on the screen may not match the actual scene. If this happens, try shooting in G mode (p. 83). • What if white and gray frames appear when you point the camera toward a subject? A white frame appears on the face or subject that the camera detected as the main subject, while gray frames appear on other detected faces.
Viewing Images What if an icon appears in the upper right of the screen? The icon for the determined scene will appear in the upper right of the screen. For details on the icons that appear, see “Scene Icons” (p. 187). Choosing the subject to focus on (Tracking AF) After pressing the o button and displaying , point the camera so that is on the subject you want to focus on. Press and hold the shutter button halfway to display a blue frame where focus and exposure will be maintained (Servo AF).
Erasing Images You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Enter Playback mode. Press the 1 button. The last image you took will appear. Choose an image to erase. Press the qr buttons to display an image to erase. Erase the image. After pressing the m button, press the op buttons to choose a, then press the m button again. [Erase?] appears on the screen.
Shooting Movies The camera can automatically select all settings so that you can shoot movies just by pressing the movie button. If you continue shooting for a long time, the camera may become warm. This is not a malfunction. Choose A mode. Set the mode switch to A. Remaining Time Compose the shot. Moving the zoom lever toward i will zoom in on your subject, making it appear larger. Moving the lever toward j will zoom out from your subject, making it appear smaller. Shoot. Press the movie button.
Shooting Movies If you change the composition of your shot Microphone during shooting, the focus will stay the same, but the brightness and tone will automatically adjust. Do not touch the microphone while shooting. Do not press any buttons other than the movie button while shooting. The sound the buttons make will be recorded in the movie. Stop shooting. Press the movie button again. The camera will beep twice and stop shooting the movie. The movie will record to the memory card.
Viewing Movies You can view the movies you have shot on the screen. Enter Playback mode. Press the 1 button. The last image you took will appear. appears on movies. Choose a movie. Press the qr buttons to choose a movie, then press the m button. Play the movie. Press the op buttons to choose , then press the m button. The movie will play. If you press the m button, the movie will pause and the movie control panel will appear.
Transferring Images to a Computer for Viewing How can I play back movies on a computer? Install the included software (p. 33). • When watching a movie on a computer, frames may drop, it may not play smoothly, and the audio may stop suddenly depending on the computer’s capabilities. • If you use the supplied software to copy the movie back onto the memory card, you can play back the movie smoothly with the camera. For enhanced playback you can also connect the camera to a TV.
Transferring Images to a Computer for Viewing Macintosh OS Computer model CPU RAM Interface Free Hard Disk Space Display Mac OS X (v10.5 – v10.6) The above OS should be pre-installed on computers with built-in USB ports. Intel Processor (still images), Core 2 Duo 2.6 GHz or higher (movies) Mac OS X v10.6: 1 GB or more (still images), 2 GB or more (movies) Mac OS X v10.
Transferring Images to a Computer for Viewing When the installation finishes, click [Restart] or [Finish]. Remove the CD-ROM. Remove the CD-ROM when your desktop screen appears. Macintosh Place the CD in the computer’s CDROM drive. Place the supplied CD-ROM (DIGITAL CAMERA Solution Disk) (p. 2) into the computer’s CD-ROM drive. Begin installation. Double-click the on the CD. Click [Install], and follow the on-screen instructions to proceed with the installation.
Transferring Images to a Computer for Viewing Open CameraWindow. Windows Click [Downloads Images From Canon Camera using Canon CameraWindow]. CameraWindow will appear. If CameraWindow does not appear, click the [Start] menu and choose [All Programs], followed by [Canon Utilities], [CameraWindow] and [CameraWindow]. Macintosh CameraWindow will appear when you establish a connection between the camera and computer.
Transferring Images to a Computer for Viewing Transfer and View Images Click [Import Images from Camera], and then click [Import Untransferred Images]. All images not previously transferred will transfer to the computer. Transferred images will be sorted by date and saved in separate folders in the Pictures folder. Close CameraWindow when image transfer is complete. Turn off the camera and unplug the cable. For details on how to view images using a computer, refer to the Software Guide.
Accessories Supplied with Camera Wrist Strap WS-DC11 Battery Pack NB-4L with Terminal Cover* AV Cable AVC-DC400* Battery Charger CB-2LV/CB-2LVE* DIGITAL CAMERA Solution Disk Interface Cable IFC-400PCU* *Also available for purchase separately.
Separately Sold Accessories The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer be available. Power Supplies Battery Charger CB-2LV/CB-2LVE A charger for charging Battery Pack NB-4L. Battery Pack NB-4L Rechargeable lithium-ion battery. AC Adapter Kit ACK-DC60 This kit lets you power the camera using household power. Recommended for powering the camera for an extended period of time or when connecting to a computer or printer.
Separately Sold Accessories Flash High-Power Flash HF-DC1 This externally mounted flash can be used to capture photographic subjects that are too distant for the built-in flash to illuminate. Other Accessories HDMI Cable HTC-100 Use this cable to connect the camera to the HDMI™ terminal on a high-definition TV set. Waterproof Case WP-DC39 Use this case to take underwater shots at depths of up to 40 meters (130 ft.), or to shoot in the rain, at the beach, or on the ski slopes.
Separately Sold Accessories Printers SELPHY series Canon-Brand PictBridge Compliant Printers By connecting your camera to a Canonbrand PictBridge compliant printer, you can print your images without having to use a computer. For more information, visit your nearest Canon retailer. Inkjet Printers Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories.
2 Learning More This chapter explains the parts of the camera and what appears on the screen, as well as the basic operating instructions.
Components Guide Microphone (p. 30) Lens Speaker Zoom Lever Shooting: i (Telephoto) / j (Wide Angle) (pp. 25, 29, 55) Playback: k (Magnify) / g (Index) (pp. 118, 125) Shutter Button (p. 23) ON/OFF button (p. 19) Mode Switch Lamp (pp. 58, 77, 173) Flash (pp. 54, 85) Tripod Socket DC Coupler Terminal Cover Memory Card / Battery Cover (p. 16) Mode Switch Use the mode switch to change the Shooting mode. You can leave it to the camera to select settings for fully automatic shooting (p. 24).
Components Guide Screen (LCD Monitor) (pp. 44, 186, 188) Movie Button (pp. 29, 107) A/V OUT (Audio/Video Output) / DIGITAL Terminal (pp. 34, 130, 152) HDMI Terminal (p. 131) Strap Mount (p. 13) b (Exposure Compensation) (p. 85) / o Button e (Macro) (p. 94) / q Button m FUNC./SET Button (p. 46) h (Flash) (pp. 85, 103) / r Button l (Display) (p. 44) / p Button Indicator (p. 45) 1 (Playback) Button (pp. 27, 117) n Button (p.
Screen Display Switching the Display You can change the screen display using the p button. Refer to p. 186 for details on information that appears on the screen. Shooting Information Display No Information Display Playback No Information Display Simple Information Display Detailed Information Display Focus Check Display (p. 124) You can also switch the display by pressing the p button while the image displays right after shooting. However, Simple Information Display is not available.
Indicator Screen Display in Dark Shooting Conditions The display automatically brightens when shooting in dark conditions, allowing you to check the composition (Night Display function). However, the brightness of the image on the screen, and the brightness of the actual image recorded may be different. Screen noise may appear and the movement of the subject may appear somewhat jagged on the screen. This has no effect on the recorded image.
FUNC. Menu – Basic Operations Commonly used functions can be set with the FUNC. menu. The menu items and options differ depending on the Shooting mode or Playback mode (pp. 190 – 197). Display the FUNC. menu. Press the m button. Choose a menu item. Press the op buttons to choose a menu item, then press the m or r button. Choosing some menu items changes the screen to display further menu options. Choose an option. Available Options Menu Items Press the op buttons to choose an option.
MENU – Basic Operations Various functions can be set from the menus. The menu items are organized under tabs, such as for shooting (4) and playback (1). The options differ depending on the Shooting mode and the Playback mode (pp. 196 – 199). Display the menu. Press the n button. Choose a tab. Move the zoom lever or press the qr buttons to choose a tab. Choose an item. Press the op buttons to choose an item.
Changing the Sound Settings You can silence or adjust the volume of camera sounds. Muting Sounds Display the menu. Press the n button. Choose [Mute]. Move the zoom lever to choose the 3 tab. Press the op buttons to choose [Mute], then press the qr buttons to choose [On]. Press the n button to restore the normal screen. • You can also mute camera sounds by holding down the p button and turning on the power. • If you mute camera sounds, the sound will also be muted when playing back movies (p.
Changing the Sound Settings Adjusting the Volume Display the menu. Press the n button. Choose [Volume]. Move the zoom lever to choose the 3 tab. Press the op buttons to choose [Volume], then press the m button. Change the volume. Press the op buttons to choose an item, then press the qr buttons to adjust the volume. Press the n button twice to restore the normal screen.
Adjusting the Screen Brightness The screen brightness can be adjusted in two ways. Using the Menu Display the menu. Press the n button. Choose [LCD Brightness]. Move the zoom lever to choose the 3 tab. Press the op buttons to choose [LCD Brightness]. Adjust the brightness. Press the qr buttons to adjust the brightness. Press the n button twice to restore the normal screen. Using the p Button Press the p button for more than one second.
Returning the Camera to Default Settings When you have mistakenly changed a setting, you can reset the camera to the default settings. Display the menu. Press the n button. Choose [Reset All]. Move the zoom lever to choose the 3 tab. Press the op buttons to choose [Reset All], then press the m button. Reset the settings. Press the qr buttons to choose [OK], then press the m button. The camera will reset to the default settings. Are there functions that cannot be reset? • The [Date/Time] (p.
Power Saving Function (Auto Power Down) To save battery power, the screen turns off, and the camera shuts down automatically when it is not operated for a certain time. Power Saving during Shooting The screen will turn off approximately 1 minute after you stop operating the camera. After about 2 more minutes, the lens will retract and the power will turn off. When the screen has turned off but the lens has not yet retracted, pressing the shutter button halfway (p.
3 Shooting with Commonly Used Functions This chapter explains how to use common functions, such as the selftimer, and how to turn off the flash. • This chapter assumes that the camera is set to A mode. When shooting in another mode, check which functions are available in that mode (pp. 190 – 195).
Turning the Flash Off You can shoot with the flash turned off. Press the r button. Choose !. Press the qr buttons to choose !, then press the m button. Once set, ! will appear on the screen. To turn the flash back on, follow the steps above to choose What if a flashing . appears? When you press the shutter button halfway in low light conditions where camera shake is likely, a flashing will appear on the screen. Attach the camera to a tripod to prevent it from moving.
Zooming in More Closely on Subjects (Digital Zoom) You can use the digital zoom to zoom up to approximately 16x maximum, and capture subjects that are too far away for the optical zoom to enlarge. However, depending on the recording pixel setting (p. 61) and zoom factor, the images may appear coarse (the zoom factor will appear in blue). Move the zoom lever toward i. Hold the lever until zooming stops. Zooming stops at the largest possible zoom factor without image deterioration.
Zooming in More Closely on Subjects (Digital Zoom) Digital Tele-Converter The focal length of the lens can be increased by approximately 1.5x or approximately 2.0x. This enables a faster shutter speed and less chance of camera shake than the zoom (including digital zoom) used by itself at the same zoom factor. However, a recording pixel setting (p. 61) of or will cause images to appear coarse (the zoom factor will appear in blue). Display the menu. Press the n button. Choose [Digital Zoom].
Inserting the Date and Time You can insert the shooting date and time in the lower right corner of an image. Once inserted, however, they cannot be deleted. Be sure to check beforehand that the date and time are correctly set (p. 19). Display the menu. Press the n button. Choose [Date Stamp]. Move the zoom lever to choose the 4 tab. Press the op buttons to choose [Date Stamp]. Choose the setting. Press the qr buttons to choose [Date] or [Date & Time].
Using the Self-Timer You can insert and print the shooting date in images which do not have an embedded date and time as follows. However, if you do this for images with an embedded date and time, the date and time may be printed twice. • Use the DPOF print settings (p. 159) to print. • Use the included software to print. Refer to the Software Guide for details. • Print using printer functions (p. 151). Using the Self-Timer The self-timer can be used to shoot a group photo that includes the photographer.
Using the Self-Timer To cancel shooting with the self-timer after the countdown has started, press the n button. To restore the original setting, choose in Step 1, on p. 58. You can change the delay and number of shots (p. 59). Using the Self-Timer to Prevent Camera Shake The camera will shoot approximately 2 seconds after the shutter button is pressed, preventing any camera shake that occurs when pressing the shutter button. Choose Î. Follow Step 1 on p. 58 to choose Î.
Using the Self-Timer Choose the settings. Press the op buttons to choose [Delay] or [Shots]. Press the qr buttons to choose a value, then press the m button. Follow Step 2 on p. 58 to shoot. What if the number of shots is set to two or more shots? • Exposure and white balance settings are set with the first shot. • If the flash fires or you set a high number of shots, the shooting interval may take longer than usual. • If the memory card fills, shooting stops automatically.
Changing the Recording Pixel Setting (Image Size) You can choose from 4 recording pixel settings. Choose the recording pixel setting. After pressing the m button, press the op buttons to choose m button again. , then press the Choose an option. Press the op buttons to choose an option, then press the m button. The setting will appear on the screen. To restore to the original setting, choose in Steps 1 – 2.
Changing the Compression Ratio (Image Quality) Approximate Values for Recording Pixels and Compression Ratio (for 4:3 Aspect Ratios) Recording Pixels Compression Ratio Single Image Data Size (Approx. KB) Number of Shots per Memory Card (Approx. shots) 4 GB 16 GB (Large) 12M/4000x3000 3084 1231 5042 1474 2514 10295 (Medium 1) 6M/2816x2112 1620 2320 9503 780 4641 19007 (Medium 2) 2M/1600x1200 558 6352 26010 278 12069 49420 (Small) 0.
4 Adding Effects and Shooting in Various Conditions This chapter explains how to add effects and how to shoot in various conditions.
Shooting in Various Conditions The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Set the camera to 4 mode. Set the mode switch to 4. Choose a Shooting mode. After pressing the m button, press the op buttons to choose G, then press the m button again. Press the op buttons to choose the desired mode, then press the m button. Shoot. I Take portraits (Portrait) Produces a soft effect when photographing people.
Shooting in Various Conditions Take nightscapes without using a tripod (Handheld NightScene) Lets you take beautiful snapshots of city nightscenes by combining several continuous shots to reduce camera shake and noise. When using a tripod, you should shoot in A mode (p. 24). Take shots in low light conditions (Low Light) Lets you take shots in dark places with reduced camera shake and subject blur.
Shooting in Various Conditions P Take shots of people in snow (Snow) Lets you take bright, natural-colored shots of people against snowy backgrounds. t Take shots of fireworks (Fireworks) Lets you take shots of fireworks in vivid colors. • In mode, hold the camera firmly while shooting as multiple images are captured in succession. • In t mode, attach the camera to a tripod to prevent the camera from moving and blurring the image.
Making Short Movies Automatically (Movie Digest) You can make a short movie of a day just by taking still images. Each time you take a picture, the scene just before taking your shot will be recorded as a movie. All the movies recorded that day will be saved as a single file. Choose . Follow Steps 1 – 2 on p. 64 to choose . Shoot. Press the shutter button fully to shoot a still image. A movie of approx. 2 – 4 sec. will be recorded just before the image is taken.
Adding Effects and Shooting You can add various effects to images when shooting. Choose a Shooting mode. Follow Steps 1 – 2 on p. 64 to choose a Shooting mode. Shoot. Since you may not achieve the expected results with images shot in , , and modes, try taking some test shots first. , Shoot images with vivid colors (Super Vivid) Lets you take shots with vivid, intense colors. Take posterized shots (Poster Effect) Lets you take shots that look like an old poster or illustration.
Adding Effects and Shooting Shoot with the Effects of a Fish-Eye Lens (Fisheye Effect) Lets you shoot with the distorting effect of a fish-eye lens. Choose . Follow Steps 1 – 2 on p. 64 to choose . Choose an effect level. Press the n button for more than one second. [Effect Level] will appear on the screen. Press the qr buttons to choose an effect level, then press the n button. You can check the effect on the screen. Shoot.
Adding Effects and Shooting Take Shots That Look Like a Miniature Model (Miniature Effect) Blurs chosen portions in the top and bottom of an image to produce the effect of a miniature model. Choose . Follow Steps 1 – 2 on p. 64 to choose . A white frame (the area that will not be blurred) appears on the screen. Choose the area to keep in focus. Press the n button for more than one second.
Adding Effects and Shooting Changing the Color and Shooting You can change the look of an image when shooting. However, depending on shooting conditions, the image may become coarse, or the colors may not come out as expected. Color Accent You can choose to retain a single color and change the rest to black and white in a composition. Choose T. Follow Steps 1 – 2 on p. 64 to choose T. Press the n button for more than one second.
Adding Effects and Shooting Color Swap You can swap one color in an image for another when recording it. You can only swap one color. Choose Y. Follow Steps 1 – 2 on p. 64 to choose Y. Press the n button for more than one second. The unchanged image and the Color Swap image will alternately display. The default setting is to change green to gray. Specify the color to be swapped. Position the center frame so it is filled with the color you want and press the q button.
Adding Effects and Shooting Specify the range of colors to be swapped. Press the op buttons to adjust the range of colors to be changed. Choose a negative value to limit the range of colors. Choose a positive value to extend the range of colors to similar colors. Press the n button to complete the setting and restore the shooting screen. • Using the flash may cause unexpected results in this mode. • Under some conditions, the image may appear coarse.
Adding Effects and Shooting Shoot with the Effects of a Toy Camera (Toy Camera Effect) This effect darkens and blurs the corners of the image, and changes the overall color so that it looks like an image shot with a toy camera. Choose . Follow Steps 1 – 2 on p. 64 to choose . Choose a color tone. Press the n button for more than one second. Press the qr buttons to choose an effect, then press the n button. You can check the color on the screen. Shoot.
Detecting a Face and Shooting (Smart Shutter) Detecting a Smile and Shooting The camera will shoot, even without pressing the shutter button, when it detects a smile. Choose . Follow Steps 1 – 2 on p. 64 to choose , then press the n button for more than one second. Press the qr buttons to choose , then press the n button. The camera will enter shooting stand-by, and [Smile Detection on] will appear on the screen. Point the camera at a person.
Detecting a Face and Shooting (Smart Shutter) Using the Wink Self-Timer Point the camera at a person and press the shutter button fully. The camera will shoot approximately two seconds after it detects a wink. Choose . Follow Steps 1 – 2 on p. 64 to choose , then press the n button for more than one second. Press the qr buttons to choose , then press the n button. Compose the shot and press the shutter button halfway.
Detecting a Face and Shooting (Smart Shutter) Changing the number of shots After choosing in Step 1, press the op buttons. • Shutting both eyes will also be detected as a wink. • If a wink is not detected, the shutter will release approximately 15 seconds later. • If there are no people in the shot when the shutter button is pressed fully, the camera will shoot after a person enters the shot and winks.
Detecting a Face and Shooting (Smart Shutter) Join the subjects and look at the camera. When the camera detects a new face, the lamp and self-timer sound will speed up (the lamp remains lit when the flash will fire), and two seconds later the shutter will release. To cancel shooting with the timer after countdown has started, press the n button. Changing the number of shots After choosing in Step 1, press the op buttons.
Shooting Long Exposures You can set the shutter speed to a range between 1 and 15 seconds to shoot long exposures. However, you should attach the camera to a tripod to prevent the camera from moving and blurring the image. Choose ≈. Follow Steps 1 – 2 on p. 64 to choose ≈. Choose the shutter speed. Press the o button. Press the qr buttons to choose the shutter speed, then press the m button. Confirm the exposure.
High-Speed Continuous Shooting (High-speed Burst) You can shoot continuously at a maximum speed of approximately 8.2 images/second while the shutter button is pressed fully and held. Choose . Follow Steps 1 – 2 on p. 64 to choose , Shoot. As long as you hold the shutter button down, the camera will shoot successive images. • The recording pixel setting will be fixed at (1984 x 1488 pixels). • The focus, brightness and white balance will be set with the first shot.
Capturing the Best Facial Expressions (Best Image Selection) The camera takes 5 continuous shots, then detects various aspects of the shot such as facial expressions, and saves only one picture detected as the best. Choose . Follow Steps 1 – 2 on p. 64 to choose . Shoot. When the shutter button is pressed fully, the camera takes five continuous shots, and saves one picture only. • The recording pixel setting will be fixed at (1984 x 1488 pixels).
Shooting Stitch Assist Images Large subjects can be split into several shots that can later be merged together using the included software on a computer to create a panoramic image. Choose x or v. Follow Steps 1 – 2 on p. 64 to choose x or v. Take the first shot. The exposure and white balance will be set with the first shot. Take subsequent shots. Overlap part of the first shot when taking the second shot.
5 Choosing Settings Yourself In this chapter you will learn how to use the various functions in G mode to progressively advance your shooting skills. • This chapter assumes that you have set the mode switch to 4 and the camera is in G mode. • G stands for Program AE. • Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 190 – 197). • “Manually Correcting the White Balance” (p.
Shooting in Program AE You can choose the settings for various functions to suit your preferences. AE stands for Auto Exposure. The focusing range is approximately 5 cm (2.0 in.) – infinity at maximum wide angle (j), and approximately 50 cm (1.6 ft.) – infinity at maximum telephoto (i). Enter G mode. Follow Steps 1 – 2 on p. 64 to choose G. Adjust the settings according to your purposes (pp. 85 – 105). Shoot.
Adjusting the Brightness (Exposure Compensation) You can adjust the standard exposure set by the camera in 1/3-stop increments in the range of -2 to +2. Enter Exposure Compensation mode. Press the o button. Adjust the brightness. While watching the screen, press the qr buttons to adjust the brightness, then press the m button. The exposure compensation amount will appear on the screen. Turning the Flash On You can make the flash fire every time you shoot.
Adjusting the White Balance The white balance (WB) function sets the optimal white balance for natural looking colors to match the shooting conditions. Choose the white balance function. After pressing the m button, press the op buttons to choose m button again. , then press the Choose an option. Press the op buttons to choose an option, then press the m button. The setting will appear on the screen. Auto Automatically sets the optimal white balance for the shooting conditions.
Adjusting the White Balance If you change camera settings after recording white balance data, the tone may not turn out properly. Manually Correcting the White Balance You can manually correct the white balance when in S mode (p. 65). This adjustment will have the same effect as using a commercially-available color compensating filter. Choose S. Follow Steps 1 – 2 on p. 64 to choose S. Choose the White Balance. After pressing the m button, press the op buttons to choose m button.
Changing the ISO Speed Choose the ISO speed. After pressing the m button, press the op buttons to choose m button again. , then press the Choose an option. Press the op buttons to choose an option, then press the m button. The setting will appear on the screen. Automatically adjusts the ISO speed to the Shooting mode and shooting conditions. Low For shooting outdoors, in fine weather conditions. For shooting in cloudy, or twilight conditions. High For shooting nightscapes, or in dark interiors.
Correcting the Brightness and Shooting (i-Contrast) The camera can detect areas in the scene, such as faces or backgrounds, that are too bright or dark and automatically adjust them to the optimum brightness when shooting. Also, when the overall image is lacking in contrast, the camera will automatically correct the image for a sharper impression when shooting. Choose [i-Contrast]. Press the n button to choose [i-Contrast] from the 4 tab, then press the qr buttons to choose [Auto].
Changing the Aspect Ratio You can change the width to height ratio of an image. Choose . After pressing the m button, press the op buttons to choose m button again. , then press the Choose an option. Press the op buttons to choose a option, then press the m button. Once set, the aspect ratio of the screen will change. The same aspect ratio as HD TVs, used for displaying on wide-screen HD TVs. The same aspect ratio as 35mm film, used for printing out 5 x 7 in. or postcard sized images.
Continuous Shooting You can shoot continuously at a maximum speed of approximately 3.4 images/second while the shutter button is pressed fully and held. Choose a Drive mode. After pressing the m button, press the op buttons to choose m button again. , then press the Choose an option. Press the op buttons to choose W, then press the m button. Once set, W will appear on the screen. Shoot. As long as you hold the shutter button down, the camera will shoot successive images.
Changing the Tone of an Image (My Colors) You can change the tone of an image, for example to sepia or black and white, when shooting. Choose My Colors. After pressing the m button, press the op buttons to choose m button again. , then press the Choose an option. Press the op buttons to choose an option, then press the m button. The setting will appear on the screen. My Colors Off — Vivid Emphasizes the contrast and color saturation for a vivid impression.
Changing the Tone of an Image (My Colors) Custom Color The contrast, sharpness, color saturation, red, green, blue, and skin tones in an image can be chosen and set at 5 different levels. Follow Step 2 on p. 92 to choose , then press the n button. Press the op buttons to choose an option, then press the qr buttons to choose a value. The more to the right, the stronger/darker (skin tone) the effect gets, the more to the left, the weaker/lighter (skin tone) the effect gets.
Shooting Close-ups (Macro) You can shoot an object at a close distance or even shoot extreme close-ups of it. The focusing range is approximately 3 – 50 cm (1.2 in. – 1.6 ft.) from the end of the lens at maximum wide angle (j). Choose e. After pressing the q button, press the qr buttons to choose e, then press the m button. Once set, e will appear on the screen. The edges of the image may darken if the flash fires.
Changing the AF Frame Mode You can change the AF (Auto Focus) frame mode to match the scene you want to shoot. Choose [AF Frame]. Press the n button to choose [AF Frame] from the 4 tab, then press the qr buttons to choose an option. Face AiAF • Detects people’s faces and sets the focus, exposure (evaluative metering only) and white balance ( only). • When the camera is pointed at subjects, a white frame appears on the face the camera judges to be the main subject, and gray frames (max.
Changing the AF Frame Mode Tracking AF You can choose the subject you want to focus on and shoot (p. 97). Center The AF frame is locked to the center. This is effective for focusing on a specific point. You can reduce the AF frame size • Press the n button to choose [AF Frame Size] from the 4 tab, then choose [Small]. • The AF frame is set to [Normal] when using the digital zoom (p. 55) or digital tele-converter (p. 56).
Choosing the Subject to Focus On (Tracking AF) You can choose the subject you want to focus on and shoot. Choose [Tracking AF]. Press the n button to choose [AF Frame] from the 4 tab, then press the qr buttons to choose [Tracking AF]. will appear in the center of the screen. Choose the subject to focus on. Point the camera so that is on the subject you want to focus on and press the q button. The camera will beep and will appear when a subject is detected.
Magnifying the Focal Point • The camera will detect a subject even if you press the shutter button half way without pressing the q button. When shooting completes, will appear in the center of the screen. • Servo AF (p. 100) is fixed to [On]. • The camera may not be able to track the subject if the subject is too small, moves too quickly or if the contrast between the subject and the background is too low. • Not available in e or u.
Shooting with the AF Lock The focus can be locked. After locking the focus, the focal distance will not change even when you release your finger from the shutter button. Lock the focus. Keep the shutter button pressed halfway and press the q button. The focus locks and % appears on the screen. If you release your finger from the shutter button and press the q button again, % will disappear and the focus will unlock. Compose the scene and shoot.
Shooting with Servo AF While the shutter button is pressed halfway, the focus and exposure will continue to adjust, allowing you to take pictures of moving subjects without missing a shot. Choose [Servo AF]. Press the n button to choose [Servo AF] from the 4 tab, then press the qr buttons to choose [On]. Focus. The focus and exposure will be maintained where the blue AF frame appears while you press the shutter button halfway. • The camera may not be able to focus in some conditions.
Changing the Metering Method You can change the metering method (brightness measuring function) to match the shooting conditions. Choose the metering method. After pressing the m button, press the op buttons to choose m button again. , then press the Choose an option. Press the op buttons to choose an option, then press the m button. The setting will appear on the screen. Evaluative For standard shooting conditions, including back lit shots.
Shooting with the AE Lock You can lock the exposure and shoot, or set the focus and exposure separately to shoot. AE stands for “Auto Exposure”. Choose ! (p. 54). Lock the exposure. Point the camera toward the subject and press the o button while pressing the shutter button halfway. When & appears, the exposure will be locked. If you release your finger from the shutter button and press the o button again, & will disappear and AE will unlock. Compose the scene and shoot.
Shooting with Slow Synchro You can make the main subject, such as people, appear bright by having the camera provide the appropriate illumination with the flash. At the same time, you can use a slow shutter speed to brighten the background that the light from the flash cannot reach. Choose …. After pressing the r button, press the qr buttons to choose …, then press the m button. Once set, … will appear on the screen. Shoot.
Red-Eye Correction You can automatically correct red-eye that occurs in images taken with the flash. Choose [Flash Settings]. Press the n button to choose [Flash Settings] from the 4 tab, then press the m button. Choose the setting. Press the op buttons to choose [Red- Eye Corr.], then press the qr buttons to choose [On]. Once set, Œ will appear on the screen. Red-eye correction may be applied to areas other than red eyes. For example, when red make-up has been used around eyes.
Checking for Shut Eyes When the camera detects the possibility that people have their eyes shut, appears on the screen. Choose [Blink Detection]. Press the n button to choose [Blink Detection] from the 4 tab, then press the qr buttons to choose [On]. Shoot. When a person with shut eyes is detected, a frame and appear on the screen. • This function is only available for the last image shot when you have set the camera to 2 or more shots in or $ mode. • Not available in W mode.
6 Using Various Functions for Shooting Movies This chapter serves as a more advanced version of the “Shooting Movies” and “Viewing Movies” sections in Chapter 1, and explains how to use various functions for shooting and viewing movies. • This chapter assumes that you have set the mode switch to 4. • The latter half of the chapter explaining movie playback and editing assumes that you have pressed the 1 button to enter Playback mode.
Shooting Various Kinds of Movies Just as with still images, you can let the camera select the best settings for the scene or add various effects while shooting movies. Choose a Shooting mode. Follow Steps 1 – 2 on p. 64 to choose a Shooting mode. Shoot. Press the movie button. Depending on the Shooting mode or movie image quality (p. 112) you choose, black bars may appear on the top and bottom of the screen. These areas will not be recorded when shooting.
Shoot Movies That Look Like a Miniature Model (Miniature Effect) You can shoot movies that look like moving miniature models. You create the miniature model effect by choosing the upper and lower portions of the scene that will be blurred, and the playback speed, which makes people and objects in the scene move quickly during playback. Audio will not be recorded. Choose . Follow Steps 1 – 2 on p. 64 to choose . A white frame (the area that will not be blurred) appears on the screen.
Shooting Super Slow Motion Movies • The image quality will be fixed at when an aspect ratio of is chosen, and when an aspect ratio of is chosen (p. 90). • If you press the qr buttons in Step 2, the frame will switch to vertical orientation, and you can change the area to focus in by pressing the qr buttons again. Pressing the op buttons will return the frame to horizontal orientation. • Holding the camera vertically will change the orientation of the frame.
Shooting Super Slow Motion Movies Frame Rates and Playback Times (for 30 Sec. Clips) Frame Rate Playback Time 240 fps Approx. 4 min. 120 fps Approx. 2 min. Viewing super slow motion movies • The movie will play back in slow motion when you follow Steps 1 – 3 on p. 31. • You can use the included software to change the playback speed of movies shot in mode. Refer to the Software Guide for details. • The recording pixel setting will be fixed at when shooting in , and when shooting in .
Changing the Image Quality You can choose among 4 different image quality settings. Choose the image quality setting. After pressing the m button, press the op buttons to choose m button again. , then press the Choose an option. Press the op buttons to choose an option, then press the m button. The option you set will appear on the screen. Image Quality and Shooting Time per Memory Card Image Recording Pixels, Quality Frame Rate Content Memory Card Capacity 4 GB 16 GB Approx. 1 hr. 1 min.
Other Shooting Functions The following functions can be used in the same way as for still images. Some functions, however, may not be available or may not have an effect depending on the Shooting mode. • Zooming in More Closely On Subjects The optical zoom is not available while shooting. Be sure to set the optical zoom before shooting. • Using the Self-Timer (p. 58) • Using the Self-Timer to Prevent Camera Shake (p. 59) • Shooting Close-ups (Macro) (p. 94) • Shooting Far Away Subjects (Infinity) (p.
Editing You can trim the beginnings and ends of recorded movies. Choose *. Follow Steps 1 – 3 on p. 31 to choose *, then press the m button. The movie editing panel and the movie editing bar will appear. Movie Editing Panel Set the editing range. Press the op buttons and choose Movie Editing Bar or . If you press the qr buttons to move , will appear at points where the movie can be edited. If you choose , you can trim the beginning of the movie from .
Editing Save the edited movie. Press the op buttons to choose , then press the m button. Press the qr buttons to choose [New File], then press the m button. The movie will be saved as a new file. • When [Overwrite] is chosen in Step 4, the unedited movie is overwritten with the edited movie, erasing the original. • When there is not enough space left on the memory card, only [Overwrite] can be chosen. • If the battery is depleted partway through saving, the edited movie clips may not be saved.
7 Using Various Playback and Editing Functions This chapter explains various ways to play back and edit images. • Press the 1 button to enter Playback mode before operating the camera. • It may not be possible to play back or edit images that have been edited on a computer, have had their file names changed, or have been taken on a different camera. • The edit function (pp. 146 – 150) cannot be used if the memory card does not have enough free space available.
Quickly Searching Images Searching Images Using Index Display Displaying multiple images at the same time lets you quickly find the image you want. Move the zoom lever toward g. Images will display in an index. The number of images increase each time you move the lever toward g. The number of images decrease each time you move the lever toward k. Choose an image. Press the opqr buttons to choose an image. An orange frame appears on the chosen image.
Quickly Searching Images To turn off this effect, press the n button to choose [Scroll Display] from the 1 tab, then choose [Off]. Viewing Movies Made with Movie Digest You can select movies made in mode (p. 67) by date for viewing. Choose . After pressing the m button, press the op buttons to choose m button again. , then press the Choose a movie date. Press the op buttons. Play the movie. Press the m button. The movie will play.
Viewing Images in Filtered Playback When there are many images on the memory card, you can filter and display them by a specified filter. You can also protect (p. 134) or delete (p. 138) all images at once while filtered. Choose ‚. After pressing the m button, press the op buttons to choose ‚, then press the m button again. Choose a filter. Press the op buttons to choose a filter, then press the m button. View the filtered images.
Viewing Images in Filtered Playback Filtered playback In filtered playback (Step 3), you can view filtered images with “Quickly Searching Images” (p. 118), “Viewing Slideshows” (p. 122), and “Magnifying Images” (p. 125). You can process all filtered images at once while performing operations in “Protecting Images” (p. 134), “Erasing Images” (p. 138), or “Choosing Images for Printing (DPOF)” (p. 159), by choosing all of the filtered images. However, if you change the category (p.
Viewing Slideshows You can automatically play back images recorded to a memory card. Each image displays for approximately 3 seconds. Choose .. After pressing the m button, press the op buttons to choose ., then press the m button again. Choose a transition effect. Press the op buttons to choose an effect, then press the m button. The slideshow will start a few seconds after [Loading image...] appears. In filtered playback (p. 120), only images matching a filter play back.
Viewing Slideshows Changing Settings You can set a slideshow to repeat, or change transition effects and the time that slideshow images are displayed. You can choose from 6 transition effects when switching between images. Choose [Slideshow]. Press the n button to choose [Slideshow] from the 1 tab, then press the m button. Choose a setting. Press the op buttons to choose an item, then press the qr buttons to adjust the setting.
Checking the Focus You can magnify the area of a recorded image that was inside the AF Frame to check the focus. Press the p button to switch to the focus check display (p. 44). A white frame will appear where the AF frame was when the focus was set. A gray frame will appear on a face detected during playback. The area within the orange frame appears magnified. Switch frames. Move the zoom lever toward k once. The screen shown on the left will appear.
Magnifying Images Move the zoom lever toward k. The display will zoom in on the image. If you continue to hold the zoom lever, it will zoom in up to a maximum factor of approximately 10x. If you press the opqr buttons, you can move the location of the displayed area. Move the zoom lever toward g to zoom Approximate Location of Displayed Area out, or continue to hold it to return to single image playback. When appears on the screen, press the m button to switch to .
Viewing Each Image in a Group Grouped images taken in mode (p. 80) can also be viewed individually. Choose an image group. Press the qr buttons to choose an image that displays Choose . . After pressing the m button, press the op buttons to choose m button again. , then press the View each image in the group. If you press the qr buttons only the images in the group will be displayed.
Viewing Each Image in a Group Ungrouping Images Grouped images taken in individually. mode can be ungrouped and viewed Choose [Group Images]. Press the n button to choose [Group Images] from the 1 tab. Choose a setting. Press the qr buttons to choose [Off]. Press the n button to complete the setting and restore single image playback. mode are ungrouped and appear individually. To regroup the images, follow the steps above and select [On].
Displaying Various Images (Smart Shuffle) The camera will choose four images based on the displayed image. If you choose one of those images, the camera will select four more images letting you enjoy playing back images in an unexpected order. This will work best if you take many shots of various scenes. Choose . After pressing the m button, press the op buttons to choose , then press the m button again. Four images will appear as possibilities. Choose an image.
Changing Image Transitions You can choose from 3 transition effects when switching between images in single image playback. Choose [Transition]. Press the n button to choose [Transition] from the 1 tab, then press the qr buttons to choose a transition effect.
Viewing Images on a TV Viewing Images on a Standard TV Using the supplied AV cable (p. 2), you can connect the camera to a TV to view images you have shot. Turn off the camera and TV. Connect the camera to the TV. Open the camera’s terminal cover and fully insert the cable plug into the camera’s terminal. White or black Yellow Insert the cable plug fully into the video input terminals as shown in the illustration. Yellow Black Turn on the TV and switch it to the input the cable is connected to.
Viewing Images on a TV Viewing Images on a High-Definition TV Using the separately sold HDMI Cable HTC-100, you can connect the camera to an HD TV to view images you have shot. Turn off the camera and TV. Connect the camera to the TV. Open the camera’s terminal cover and fully insert the cable plug into the camera’s terminal. Fully insert the cable plug into the TV’s HDMI input. Display images. Follow Steps 3 and 4 on p. 130 to display the images.
Viewing Images on a TV Using a TV Remote to Control the Camera When you connect the camera to an HDMI CEC compatible TV, you can use the TV’s remote control to operate the camera and play back images or view slideshows. You may need to make settings on some TVs. For details, refer to the user guide supplied with the TV. Choose [Ctrl via HDMI]. Press the n button to choose [Ctrl via HDMI] from the 3 tab, then press the qr buttons to choose [Enable]. Connect the camera to the TV.
Viewing Images on a TV Summary of the Camera Control Panel Displayed on the TV . Return Closes the menu. Group playback Displays groups of High-speed Burst images (only appears when grouped images are chosen). Play movie Plays a movie (only appears when a movie is chosen). Slideshow Plays back images automatically. During playback, you can press the remote control’s qr buttons to switch images. Index playback l Change display Displays images in an index. Changes the screen display (p. 44).
Protecting Images You can protect important images so that they cannot be accidentally erased with the camera (pp. 28, 138). Protect the image. After pressing the m button, press the op buttons to choose :, then press the m button again. [Protected] will appear on the screen. To unlock an image, follow the step above to choose : again, then press the m button. If you format the memory card (pp. 22, 167), protected images will also be erased.
Protecting Images Choosing Images Individually Choose [Select]. Follow Step 2 on p. 134 to choose [Select], then press the m button. Choose images. Press the qr buttons to choose an image, then press the m button. will appear on the screen. Press the m button again to deselect the image. will disappear. To choose additional images, repeat the above procedure. Protect the image. If you press the n button, a confirmation screen will appear.
Protecting Images Select Range Choose [Select Range]. Follow Step 2 on p. 134 to choose [Select Range], then press the m button. Choose a starting image. Press the m button. Press the qr buttons to choose an image, then press the m button. Choose an ending image. Press the r button to choose [Last image], then press the m button. Press the qr buttons to choose an image, then press the m button. You cannot choose images before the first image.
Protecting Images Protect images. Press the p button to choose [Protect], then press the m button. Choose All Images Choose [All Images]. Follow Step 2 on p. 134 to choose [All Images], then press the m button. Protect images. Press the op buttons to choose [Protect], then press the m button. You can unlock groups of protected images if you choose [Unlock] in Step 4, while in [Select Range] or Step 2 while in [All Images].
Erasing Images You can choose images and then erase them in groups. Since erased images cannot be recovered, exercise adequate caution before erasing. Protected images (p. 134) cannot be erased. Choose a Selection Method Choose [Erase]. Press the n button to choose [Erase] from the 1 tab, then press the m button. Choose a selection method. Press the op buttons to choose a selection method, then press the m button. Press the n button to restore the menu screen.
Erasing Images Erase. If you press the n button, a confirmation screen will appear. Press the qr buttons to choose [OK], then press the m button. Select Range Choose [Select Range]. Follow Step 2 on p. 138 to choose [Select Range], then press the m button. Choose images. Follow Steps 2 and 3 on p. 136 to choose images. Erase. Press the p button to choose [Erase], then press the m button. Choose All Images Choose [All Images]. Follow Step 2 on p.
Tagging Images as Favorites When you tag images as favorites, you can easily categorize just those images. You can also filter out just those images for viewing, protecting or erasing (p. 120). Make the setting. After pressing the m button, press the op buttons to choose m button again. \ , then press the [Tagged as Favorite] will appear on the screen. To unlock an image, follow the step above to choose button. again, then press the m Using the Menu Choose [Favorites].
Tagging Images as Favorites Complete the setting. If you press the n button, a confirmation screen will appear. Press the qr buttons to choose [OK], then press the m button. If you switch to Shooting mode or turn off the power before completing the setting in Step 3, images will not be tagged as favorites. If you use Windows 7 or Windows Vista and transfer tagged images to the computer, they will be given a star rating of 3 ( ) (except for movies).
Organizing Images by Category (My Category) You can organize images into categories. You can display the images in a category in filtered playback (p. 120) and process all images at once by using the functions below. • “Viewing Slideshows” (p. 122), “Protecting Images” (p. 134), “Erasing Images” (p. 138), “Choosing Images for Printing (DPOF)” (p. 159) Images are automatically categorized by shooting condition as they are shot. : Images with detected faces, or images shot in I or V.
Organizing Images by Category (My Category) Using the Menu Choose [My Category]. Press the n button to choose [My Category] from the 1 tab, then press the m button. Choose a selection method. Press the op buttons to choose a selection method, then press the m button. Press the n button to restore the menu screen. Choosing Images Individually Choose [Select]. Follow Step 2 above to choose [Select], then press the m button. Choose an image. Press the qr buttons to choose an image.
Organizing Images by Category (My Category) Complete the setting. If you press the n button, a confirmation screen will appear. Press the qr buttons to choose [OK], then press the m button. If you switch to Shooting mode or turn off the power before completing the setting in Step 4, images will not be tagged as My Category. Select Range Choose [Select Range]. Follow Step 2 on p. 143 to choose [Select Range], then press the m button. Choose images. Follow Steps 2 and 3 on p.
Rotating Images You can change the orientation of an image and save it. Choose \. After pressing the m button, press the op buttons to choose \, then press the m button again. Rotate the image. Press the qr buttons to rotate the image 90° in the chosen direction. Press the m button to complete the setting. Using the Menu Choose [Rotate]. Press the n button to choose [Rotate] from the 1 tab, then press the m button. Rotate the image. Press the qr buttons to choose an image.
Resizing Images You can resize images to a lower pixel setting and save the resized image as a separate file. Choose [Resize]. Press the n button to choose [Resize] from the 1 tab, then press the m button. Choose an image. Press the qr buttons to choose an image, then press the m button. Choose an image size. Press the qr buttons to choose an option, then press the m button. [Save new image?] will appear on the screen. Save the new image.
Trimming You can cut out a portion of a recorded image and save it as a new image file. Choose [Trimming]. Press the n button to choose [Trimming] from the 1 tab, then press the m button. Choose an image. Trimming Area Press the qr buttons to choose an image, then press the m button. Adjust the trimming area. A frame will appear around the portion of the image to be trimmed.
Adding Effects with the My Colors Function You can change the color of an image and save it as a separate image. Refer to p. 92 for details on each menu item. Choose [My Colors]. Press the n button to choose [My Colors] from the 1 tab, then press the m button. Choose an image. Press the qr buttons to choose an image, then press the m button. Choose an option. Press the qr buttons to choose an option, then press the m button. Save as a new image and display. Follow Steps 4 and 5 on p. 146.
Correcting the Brightness (i-Contrast) The camera can detect areas in an image, such as faces or backgrounds, that are too dark and automatically adjust them to the optimum brightness. Also, when the overall image is lacking in contrast, the camera will automatically correct the image for a sharper impression. You can choose from 4 levels of correction, and save the image as a new file. Choose [i-Contrast]. Press the n button to choose [i-Contrast] from the 1 tab, then press the m button.
Correcting the Red-Eye Effect You can automatically correct red eyes in images and save them as new files. Choose [Red-Eye Correction]. Press the n button to choose [RedEye Correction] from the 1 tab, then press the m button. Choose an image. Press the qr buttons to choose an image. Correct the image. Press the m button. Red-eye detected by the camera will be corrected and a frame will appear around the corrected portion.
8 Printing This chapter explains how to choose images for printing, and print using a Canon-brand PictBridge compliant printer (sold separately). Canon-Brand PictBridge Compliant Printers • This chapter uses Canon-brand SELPHY CP series printers in the explanations. The displayed screens and available functions will differ depending on the printer. Please also refer to the Printer User Guide.
Printing Images Easy Print You can easily print the pictures you take by connecting the camera to a PictBridge compliant printer (sold separately) using the supplied interface cable (p. 2). Turn off the camera and printer. Connect the camera to the printer. Open the cover and insert the cable’s small plug firmly into the camera terminal in the direction shown. Insert the cable’s large plug into the printer. For connection details, refer to the user guide provided with the printer. Turn on the printer.
Printing Images Print images. Press the op buttons to choose [Print], then press the m button. Printing will start. If you want to print additional images, repeat Steps 5 and 6 after printing has completed. After printing has completed, turn off the camera and printer, and unplug the interface cable. • Refer to p. 40 for Canon-brand PictBridge compliant printers (sold separately). • Index printing is not available on certain Canon-brand PictBridge compliant printers (sold separately).
Printing Images Making Print Settings Connect the camera to the printer. Follow Steps 1 – 6 on p. 152 to display the screen on the left. Choose a menu option. Press the op buttons to choose an option. Choose the option settings. Press the qr buttons to choose the option setting. Default Follows the printer’s settings. Date Prints the date. File No. Both Prints the file number. Prints both the date and file number. Off — Default Follows the printer’s settings.
Printing Images Trimming and Printing (Trimming) You can cut out a portion of an image for printing. Choose [Trimming]. Follow Steps 1 – 2 on p. 154 to choose [Trimming], then press the m button. A frame will appear around the portion of the image to be trimmed. Choose the trimming area. If you move the zoom lever, you can change the frame size. Press the opqr buttons to change the frame position. Press the m button to rotate the frame.
Printing Images Choosing the Paper Size and Layout for Printing Choose [Paper Settings]. Follow Steps 1 – 2 on p. 154 to choose [Paper Settings], then press the m button. Choose a paper size. Press the op buttons to choose an option, then press the m button. Choose the paper type. Press the op buttons to choose an option, then press the m button. Choose the layout. Press the op buttons to choose a layout, then press the m button.
Printing Images Available Layout Options Default Follows the printer’s settings. Bordered Prints with a border. Borderless Prints without a border. N-up Selects how many copies of an images are printed on a sheet. ID Photo Prints ID photos. Only images with the same resolution as the camera’s L (Large) recording pixel setting and a 4:3 aspect ratio can be chosen. Fixed Size Choose the print size. Choose from 3.5 x 5 in., postcard and wide sized prints. Printing ID Photos Choose [ID Photo].
Printing Images Printing Movies Connect the camera to the printer. Follow Steps 1 – 6 on p. 152 to choose a movie and display the screen on the left. Choose a printing method. Press the op buttons to choose , then press the qr buttons to choose a printing method. Print images. Printing Methods for Movies Single Prints currently displayed scene as a still image. Sequence Prints a sequence of images from a specified scene on a single sheet of paper.
Choosing Images for Printing (DPOF) You can choose up to 998 images on a memory card for printing and specify settings such as the number of copies so that they can be printed together (p. 163) or processed at a photo developer service. These selection methods comply with the DPOF (Digital Print Order Format) standards. Movies cannot be chosen. Adding Images to a Print List with the FUNC. Menu You can add images to the print list (DPOF) directly after shooting or during playback in the FUNC. menu.
Choosing Images for Printing (DPOF) Print Settings You can set the print type, date and file number. These settings apply to all images chosen for printing. Choose [Print Settings]. Press the n button to choose [Print Settings] from the 2 tab, then press the m button. Choose a setting. Press the op buttons to choose a menu item, then press the qr buttons to choose an option. Press the n button to complete the setting and restore the menu screen. Standard Print Type Date File No.
Choosing Images for Printing (DPOF) • With [Index] chosen, the [Date] and [File No.] options cannot be set to [On] at the same time. • The date will be printed in the style set in the [Date/Time] function in the 3 tab, which can be chosen after you press the n button (p. 19). Choosing the Number of Copies Choose [Select Images & Qty.]. Press the n button to choose [Select Images & Qty.] from the 2 tab, then press the m button. Choose an image.
Choosing Images for Printing (DPOF) Select Range Choose [Select Range]. Follow Step 1 on p. 161 to choose [Select Range], then press the m button. Choose images. Follow Steps 2 – 3 on p. 136 to choose images. Make print settings. Press the op buttons to choose [Order], then press the m button. Set All Images to Print Once Choose [Select All Images]. Follow Step 1 on p. 161 to choose [Select All Images], then press the m button. Make print settings.
Choosing Images for Printing (DPOF) Printing chosen images (DPOF) • When there are images added to the print list (pp. 159 – 162), the screen on the left will appear when you connect the camera to a PictBridge compliant printer. Press the op buttons to choose [Print now], then press the m button to easily print images added to the print list. • If you stop the printer during printing and start again, it will start from the next print.
9 Customizing Camera Settings You can customize various settings to suit your shooting preferences. The first part of this chapter explains convenient and commonly used functions. The latter part explains how to change shooting and playback settings to suit your purposes.
Changing Camera Settings You can customize convenient and commonly used functions from the 3 tab (p. 47). Changing Sounds You can change each of the camera’s operation sounds. Choose [Sound Options], then press the m button. Press the op buttons to choose a menu item. Press the qr buttons to choose an option. 1 Preset sounds (cannot be modified) 2 Preset sounds You can use the included software to change the sounds (p. 2). Even if you change the shutter sound, it will have no effect in (p.
Changing Camera Settings Low Level Memory Card Formatting Perform low level formatting when [Memory card error] appears, the camera does not operate properly, you think that the recording/reading speed of a memory card has dropped, or recording suddenly stops while shooting a movie. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Choose [Low Level Format]. Choose [Format], then press the m button.
Changing Camera Settings Changing the Start-up Screen You can change the start-up screen that appears when you turn on the camera. Choose [Start-up Image], then press the m button. Press the qr buttons to choose an option. No start-up image 1 Preset images (cannot be modified) 2 Preset images You can set recorded images, and use the included software to change the images.
Changing Camera Settings Register the start-up image or sounds with the included software The dedicated operation sounds and start-up images on the included software can be registered to the camera. Refer to the Software Guide for details. Changing the File Number Assignment Images you shoot are automatically assigned file numbers in the order they were taken, from 0001 – 9999, and saved to folders of up to 2,000 images. You can change the file number assignment.
Changing Camera Settings Creating Folders by Shooting Date Images are saved into folders created each month, however, you can also create folders by shooting date. Choose [Create Folder], then press the qr buttons to choose [Daily]. Images will be saved into folders created on each shooting date. Changing the Lens Retract Time For safety reasons, the lens retracts about 1 minute after pressing the 1 button when in a Shooting mode (p. 27).
Changing Camera Settings Setting the Screen Shut-Off Time You can adjust the time the screen takes to shut off automatically (p. 52). This also works when [Auto Power Down] is set to [Off]. Choose [Power Saving], then press the m button. Press the op buttons to choose [Display Off], then use the qr buttons to choose a time. In order to save battery power, you should choose less than [1 min.].
Changing Camera Settings Set the world time zone. Press the op buttons to choose [ World], then press the m button. Press the qr buttons to choose the world time zone. You can also set the daylight saving time as in Step 1. Press the m button. Choose the world time zone. Press the op buttons to choose [ World], then press the n button. will appear on the shooting screen (p. 186). If you change the date or time in the setting (p. 19), your [ time and date will automatically change.
Changing Shooting Function Settings If you set the mode switch to 4, and the mode to G, you can change the settings in the 4 tab (p. 47). Before attempting to shoot using a function explained in this section in modes other than G, check if the function is available in those modes (pp. 190 – 197). Turning Off the AF Assist Beam The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp.
Changing Shooting Function Settings Changing the Image Display Time Right After Shooting You can change the length of time the images display right after shooting. Choose [Review], then press the qr buttons to choose an option. 2 – 10 sec. Hold Off Displays images for the set time. The image displays until you press the shutter button halfway. Images will not display. Changing the Way the Image Displays Right After Shooting You can change the way the image displays right after shooting.
Changing Shooting Function Settings Grid lines will not be recorded on the image. Changing the IS-Mode Settings Choose [IS Mode], then press the qr buttons to choose an option. Continuous Image stabilization is always on. You can confirm the effects directly on the display, which makes it easier to check the composition or focus. When shooting movies, the camera also reduces strong camera shake, for example when walking (Dynamic mode).
Changing Playback Function Settings You can adjust the settings in the 1 tab by pressing the 1 button (p. 47). Choosing the Image that First Displays in Playback Choose [Resume], then press the qr buttons to choose an option. Last seen Resumes with the image last viewed. Last shot Resumes with the most recently shot image. Turning Off the Auto Rotate Function When you play back images on the camera, images shot in vertical orientation automatically rotate and display vertically.
10 Useful Information This chapter introduces how to use the AC adapter kit and Eye-Fi card (both sold separately), troubleshooting tips, and contains lists of functions and items that appear on the screen.
Using Household Power If you use AC Adapter Kit ACK-DC60 (sold separately), you can use the camera without worrying about how much charge is left in the battery. Turn off the camera. Insert the coupler. Follow Step 2 on p. 16 to open the cover, then insert the coupler as shown until it locks into place with a click. Follow Step 5 on p. 17 to close the cover. Terminals Plug the cord into the coupler. Open the cover and fully insert the plug into the coupler. Connect the power cord.
Using an Eye-Fi Card Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is authorized in the country or territory of use (p. 16). When you put a prepared Eye-Fi card into the camera, you can automatically transfer your images wirelessly to a computer, or upload them to a web service. Image transfer is a function of the Eye-Fi card.
Using an Eye-Fi Card • The power saving function does not work while transferring images (p. 52). • Choosing will interrupt the Eye-Fi connection. Choosing another Shooting mode or entering Playback mode will reopen the Eye-Fi connection, but movies made with the Movie Digest function may be retransferred. Checking Connection Information You can check the Eye-Fi card’s access point SSID, or connection status. Choose [Connection info].
Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the ON/OFF button, but nothing happened. • • • • Confirm that the battery is the correct type, and is not depleted (p. 15). Confirm that the battery is properly inserted (p. 17). Confirm that the memory card/battery cover is securely closed (p. 17).
Troubleshooting • Shoot using the focus lock or AF lock (pp. 96, 99). Even when you press the shutter button halfway, the AF frame does not appear, and the camera does not focus. • If you center on the light and dark contrasting area of the subject and push the shutter button halfway, or repeatedly push the shutter button halfway, the AF frame will appear and the camera will focus. Subject is too dark. • • • • Set the flash to h (p. 85). Correct the brightness with exposure compensation (p. 85).
Troubleshooting Shooting Movies Correct shooting time does not display, or stops. • Format the memory card in the camera, or use a memory card capable of recording at high speeds. Even when the shooting time does not display properly, the recorded video will be the length that it was actually shot (pp. 22, 30). appeared on the screen and shooting ended automatically. The camera’s internal memory was insufficient. Try one of the following: • Perform a low-level format of the memory card in the camera (p.
List of Messages That Appear on the Screen If error messages appear on the screen, try one of the following solutions. No memory card • The memory card is not installed in the correct direction. Install the memory card in the correct direction (p. 17). Memory card locked • The SD memory card, SDHC memory card, SDXC memory card or Eye-Fi card’s write protect tab is set to “LOCK”. Unlock the write protect tab (p. 16). Cannot record! • You attempted to shoot an image without a memory card.
List of Messages That Appear on the Screen Invalid selection range • When choosing the selection range (pp. 136, 139, 144, 162), you tried to choose a starting image that was after the last image or you tried to choose an ending image that was before the starting image. Exceeded selection limit • You chose more than 998 images in print settings. Choose less than 998 images (p. 161). • Print settings could not be saved correctly. Reduce the number of selected images and try again (p. 161).
Information Displayed on the Screen Shooting (Information Display) Battery Charge Indicator (p. 15) Camera Orientation* White Balance (p. 86) My Colors (p. 92) Drive Mode (p. 91) Grid Lines (p. 174) Camera Shake Warning (p. 26) Metering Method (p. 101) Compression (Image Quality) (p. 61) / Recording Pixels (pp. 61, 112) Recordable Shots (p. 62) Self-Timer (pp. 58, 59) * Image Quality (Movies) (p. 112) Remaining Time (p. 112) Digital Zoom Magnification (p. 55) / Digital Teleconverter (p.
Information Displayed on the Screen Scene Icons In A mode, the camera displays an icon for the scene it has determined and then automatically focuses and selects the optimum settings for subject brightness and color.
Information Displayed on the Screen Playback (Detailed Information Display) Movies (p. 31), Highspeed Burst (p. 80), Print List (p. 159) My Category (p. 142) Shooting Mode (p. 190) ISO Speed (p. 88), Playback Speed (Movies) (p. 109) Exposure Compensation Amount (p. 85) White Balance (p. 86) Histogram (p. 45) Group Playback (p. 126), Image Editing (pp. 146 – 150) Compression (Image Quality) (p. 61) 188 Recording Pixels (pp. 61, 112), MOV (Movies) Eye-Fi Transfer Complete (p.
Information Displayed on the Screen Summary of Movie Control Panel in “Viewing Movies” (p. 31) Exit Playback Slow motion playback (You can use the qr buttons to adjust the speed. Sound will not play back.) Skip Backward* (Continues to rewind if you hold down the m button.) Previous frame (Rewind if you hold down the m button.) Next frame (Fast forward if you hold down the m button.) Skip Forward* (Continues to fast forward if you hold down the m button.) * Edit (p.
Functions Available in Each Shooting Mode 4 Shooting Modes A Function G I V Exposure Compensation (p. 85) — AE Lock/FE Lock*1 (p. 102) — — — — — — Focusing Range (p. 94) Flash (pp.
Functions Available in Each Shooting Mode 4 S O P t ≈ xv — — TY w — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Functions Available in Each Shooting Mode 4 Shooting Modes A Function G I V FUNC. Menu White Balance (p. 86) *6 Underwater White Balance Compensation (p. 87) ISO Speed (p. 88) Self-Timer (pp. 58, 59) Self-Timer Settings (p. 59) Drive Mode (p. 91) Aspect Ratio (Still Images) (p. 90) Recording Pixels (p.
Functions Available in Each Shooting Mode 4 TY w S O P t ≈ xv FUNC.
Functions Available in Each Shooting Mode 4 Shooting Modes A Function G I V FUNC. Menu Compression Ratio (p. 61) Image Quality (Movies) (pp. 110, 112) — — — — — — — — — — — — — — — — *1 FE Lock not available when set to !. *2 Not selectable but switches to … depending on the circumstances.
Functions Available in Each Shooting Mode 4 TY w S O P t ≈ xv FUNC.
Menus 4 Shooting Menu 4 Shooting Modes A Function AF Frame (p. 95) AF Frame Size*3 (p. 96) Digital Zoom (p. 55) AF-Point Zoom (p. 98) Servo AF (p. 100) AF-assist Beam (p. 173) Face AiAF*1 Tracking AF Center Normal Small Standard Off 1.5x 2.0x On Off On Off*4 On Off Red-Eye Corr. Flash Settings (pp. 104, 174) Red-Eye Lamp i-Contrast (p. 89) Review (p. 174) Review Info (p. 174) Blink Detection (p. 105) Grid Lines (p. 174) IS Mode (p. 175) Date Stamp (p. 57) Off Auto Off 2 sec. 3 – 10 sec.
Menus 4 TY w — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Menus 3 Set up Menu Item Content Ref. Page Mute On/Off* Volume Set all operation sounds (5 levels). p. 48 p. 49 Sound Options Set the sounds for each camera operation. p. 166 Hints & Tips On*/Off p. 166 LCD Brightness Sets screen brightness (5 levels). p. 50 Start-up Image Add an image as a start-up image. p. 168 Format Formats memory card, erasing all data File Numbering Continuous*/Auto Reset p. 169 Create Folder Monthly*/Daily p. 170 Lens Retract 1 min.*/0 sec.
Menus 1 Playback Menu Item Content Ref. Page Slideshow Plays back images automatically. p. 122 Erase Erases images (Select, Select Range, All Images). p. 138 Protect Protects images (Select, Select Range, All Images). p. 134 Rotate Rotates images. p. 145 Favorites Tags or untags images as favorites. p. 140 My Category Categorizes images (Select, Select Range). p. 142 i-Contrast Corrects dark portions and contrast in still images. p.
Playback Mode FUNC. Menu Item Content Ref. Page Rotate Rotates displayed image. p. 145 Print Settings Selects or clears settings for printing displayed image ([Print] appears when the camera is connected to the printer). p. 159 Protect Protects/unlocks displayed image. p. 134 Favorites Tags/untags displayed image as favorites. p. 140 Erase Erases displayed image. p. 138 Group Playback Plays back images taken with High-speed Burst one by one. p. 126 Movie Playback Starts movie playback.
Handling Precautions • This camera is a high-precision electronic device. Do not drop it or subject it to strong impacts. • Never place the camera close to magnets, motors or other devices that generate strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. • If water droplets or dirt become stuck on the camera or screen, wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.
Specifications Image Sensor Camera Effective Pixels .................. Approx. 12.1 million pixels Lens Focal Length ................................... 4x zoom: 5.0 (W) – 20.0 (T) mm (35mm film equivalent: 28 (W) – 112 (T) mm) Focusing Range.............................. 3 cm (1.2 in.) – infinity (W), 50 cm (1.6 ft.) – infinity (T) • Macro 3 – 50 cm (W) (1.2 in. – 1.6 ft. (W)) Image Stabilizer System...................... Lens-shift type Imaging Processor .............................
Specifications Shooting Modes...................................Auto, P, Movie Digest, Portrait, Kids&Pets, Smart Shutter*, High-speed Burst, Best Image Selection, Handheld Night Scene, Low Light, Fish-eye Effect, Miniature Effect, Toy Camera Effect, Monochrome, Super Vivid, Poster Effect, Color Accent, Color Swap, Beach, Underwater, Foliage, Snow, Fireworks, Long Shutter, Stitch Assist, Super Slow Motion Movie • Movies are recorded by pressing the movie button.
Specifications Movies............................................. Super Slow Motion Movie: 640 x 480 (120 fps*3 when shooting, 30 fps*2 during playback), 320 x 240 (240 fps*4 when shooting, 30 fps*2 during playback) Miniature Effect: 1280 x 720*5, 640 x 480*5 Movies Other than Super Slow Motion Movie and Miniature Effect: 1920 x 1080 pixels (24 fps*1), 1280 x 720 (30 fps*2), 640 x 480 (30 fps*2), 320 x 240 (30 fps*2) *1 Actual frame rate is 119.88 fps. *2 Actual frame rate is 29.97 fps.
Specifications Battery Pack NB-4L Type.....................................................Rechargeable lithium-ion battery Voltage ................................................3.7 V DC Capacity...............................................760 mAh Charging cycles ...................................Approx. 300 times Operating temperature ........................0 – 40 °C (32 – 104 °F) Dimensions..........................................35.4 x 40.3 x 5.9 mm (1.39 x 1.59 x 0.23 in.) Weight ...............
Index A AC Adapter Kit.................................. 38, 178 Accessories .............................................. 38 AE Lock .................................................. 102 AF Frames.......................................... 25, 95 AF Focus AF Lock ............................................ 99, 186 AF-Point Zoom ......................................... 98 Aspect Ratio ............................................. 90 AUTO Mode (Shooting Mode).................. 24 AV Cable ..............
Index Focus Lock ............................................... 96 Focusing Range Infinity ................................................ 94 Macro................................................. 94 Foliage (Shooting Mode) .......................... 65 Format Memory Cards, Formatting Formatting (Memory Card) ............... 22, 167 FUNC. Menu List ................................................... 200 Menu.................................................. 46 G Grid Lines .............................
Index Information Display.................. 186, 188 Menu FUNC. Menu, Menu Switching the Display ........................ 44 SD/SDHC/SDXC Memory Card Memory Cards Self-Timer 10 Second Self-Timer........................ 58 Changing Delay and Number of Shots ................................................. 59 Face Self-Timer (Shooting Mode) ..... 77 Two Second Self-Timer ..................... 59 Wink Self-Timer (Shooting Mode) ..... 76 Sepia Tones .............................................
Disclaimer • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products. CEL-SQ6PA210 © CANON INC.