User Guide

3
1.2 Installation procedure
1.2.1 Mounting to the iR
Machine
1) Turn off the main power switch, and disconnect the
power plug from the power outlet.
2) Remove the machine’s rear cover [1].
- 4 screws [2]
F-1-2
3) Cut off the area [2] of the rear cover [1] indicated
in the figure using nippers.
F-1-3
4) Mount the LAN board [1].
- 4 TP screws (3x8)
F-1-4
5) Connect the LAN board and the IP board.
- 1 IP-LAN cable [1]
F-1-5
6) Fit the wire saddle (black) [1] in place, and fit the
IP-LAN cable [2] in it.
F-1-6
[1]
[2]
[1]
[2]
[1]
[2]
[2]
[1]
[1]
[2]