Printer Copying Guide

Frame Erase
2-5
Special Copying Features
2
Frame Erase
The Frame Erase modes erase shadows and lines that appear when copying
various types of originals. The following three Frame Erase modes are available.
IMPORTANT
• Combination of the three Frame Erase modes cannot be set. If you select one of these
modes, the previously set mode is canceled.
• You can set the Frame Erase modes only for the original sizes shown on the LCD display.
NOTE
• You can select originals of the following sizes: 11 × 17, LGL, LTRR, LTR, STMTR, or
STMT.
• You cannot select the free size paper loaded in the stack bypass.
■ Original Frame Erase
The Original Frame Erase mode erases the dark borders and frame lines that appear
around the copy if the original is smaller than the selected paper size. You can also use
this mode to create a blank border around the edge of the copy.
Original (STMT)
Original Frame
Erase Selected
Original Frame
Erase Not
Selected
Copy (LTR)
Copy (LTR)