PIXMA iP6210D SERVICE MANUAL Canon Copyright 2005, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited. Download Service Manual And Resetter Printer at http://printer1.blogspot.
1. PRODUCT LIST 1-1. Main Units Product name Product code Canon Ink Jet Printer iP6210D 1-2. Options Product name Blue Tooth Unit(BU-20) Sales territories 0012B001AA US 0012B002AA CA 0012B003AA LAM LVT 0012B004AA LAM HVT 0012B006AA EUM 0012B007AA EMB 0012B008AA ASA HVT 0012B009AA AU 0012B011AA GB 0012B014AA HK Product code Sales territories Remarks Remarks 0689B001AA – 001: JPN 0689B006AA 002: USA/CAN/HK/MY/SPL 004: CN 005: EUR/AU 006: KR 1-3.
2. PRODUCT SPECIFICATIONS 2-1. Printer Main Unit Specifications Paper feeding method Resolution Printing speed ASF 4,800 x 1,200 dpi (max.) Printing direction Fast mode print duty Print width Interface Bi-directional / Uni-directional (automatically switched according to print data and print mod 50% duty 203.2 mm (216 mm in borderless printing) Supported ink cartridge ASF stacking capacity Paper weight Consumable Max. 10 mm (Approx. 100 pages of 75 g/m2) 64 to 105 g/m2 10 mm or less 10 mm (Approx.
Power supply Input voltage / Frequency During printing Power consumption: Stand-by status External dimensions Weight Related standards Electromagnetic radiance, Electrical safety AC 100 to 240 V, 50/60Hz Approx. 11 W Approx. 1 W - With the paper support extended: Approx. 435 (W) x 280 (D) x 259 (H) mm - With the paper support retracted: Approx. 435 (W) x 253 (D) x 165 (H) mm Approx. 3.
2-2.
Throughput Approx. 69 seconds, with the following conditions and settings: - A photo from a 5 mega-pixel digital camera - PP-101 4” x 6” - ExifPrint/Standard - Process from pressing the printing start button to ejecting paper Print Beam printing (Direct Printing from a camera-equipped mobile phone via wireless communication) Printable data Supported print paper Supported layout Image (JPEG only, text printing not possible) See 2-3, Print Media Specifications.
Print head Color: 192 nozzles in 3 vertical lines Photo: 192 nozzles in 2 vertical lines Ink droplet: Col 5 pl / 2 pl, Photo 5 pl / 2 pl, Ink color Col: Y/M/C (super dye-based), Photo: PBK/PM/PC (super dye-based) Weight CL-51(Col) approx. 56 g, CL-52(Photo) approx. 56 g CL-41(Col) approx.
3. ERROR DISPLAY Errors are displayed by the LEDs, and ink low warnings are displayed by the Status Monitor. 3-1. Operator Call Error (Alarm LED Blinking in Orange) There is no paper. Alarm LED blinking (Service mode) 2 times The paper is jammed. 3 times LED display Ink has run out. Replace the ink cartridge and close the cover. U041 5 times The following ink cartridge cannot be recognized.
3-2. Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (Power LED)) Cycles of blinking in orange and Error Corrective Action green 2 times Carriage error [5100] Replace the printer as it has failed. 3 times Paper feed error [6000] Replace the printer as it has failed. 4 times Purge unit error [5C00] Replace the printer as it has failed. 5 times ASF(cam) sensor error [5700] Replace the printer as it has failed.
4. REPAIR 4.1 Notes on Service Part Replacement (and Disassembling/Reassembling) in Asia Service part Logic board ass’y (QM2-2841) Notes on replacement Adjustment/settings - Detach the logic board ass’y about one minute after removing the power cord to prevent the logic board ass’y from being damaged. (to discharge the accumulated electricity in the capacitor) - If a waste ink amount is more than 7%, replacement of the ink absorber is necessary. After replacement: 1. Initialize the EEPROM. 2.
<Service mode operation procedures> 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button. 3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode.
At Logic board replacement, make settings for each destination.
5. EXTERNAL VIEW / PARTS LIST (for Asia) 5-1. External Parts, Power Supply Unit, Logic Board Ass’y 5-2. Print Unit (13/25) Download Service Manual And Resetter Printer at http://printer1.blogspot.
Parts List Key Part Number Rank Q’ty Description 1 QM2-3324-000 I 1 PAPER SUPPORT ASS’Y QC1-7539-000 J 1 TOP COVER US/CA/ASA HVT/AU/GP QC1-7540-000 J 1 TOP COVER EUM/EMB/GB QM2-3327-000 J 1 OPERATION PANEL UNIT 2 3 Remark 4 QL2-1280-000 J 1 CARD SLOT COVER ASS’Y 5 QC1-7531-000 J 1 HEAD ACCESS COVER 6 QC1-5005-000 J 1 EMBLEM(E) 7 QL2-1282-000 J 1 FRONT COVER ASS’Y 8 QM2-3339-000 J 1 MAIN CASE ASS’Y 9 QC1-7509-000 J 1 I/F COVER 10 QC1-7508-000 J 1 SI
6. TROUBLESHOOTING FLOWCHART 6-1. Printer Main Unit Troubleshooting Flowchart (how to confirm printer operation at refurbishment) Power ON Service Call Error? Yes No Open access cover, and install print head Service Call Error? Yes No Connect to computer Shipment inspection pattern printing Correct? Yes < Shipment inspection pattern check items> (See APPENDIX 1, SHIPMENT INSPECTION PATTERN 1.) See 4. SERVICE MODE for printing method. 1. Non-ejection of ink: 2. Top of form: 3. Vertical lines: 4.
6-2.
7. SPECIAL NOTES ON SERVICING 7-1. Notes on the Waste Ink Absorber (for absorbing waste ink when doing borderless printing) Replacement. After the waste ink absorber shown below was replaced, check if head-to-paper distance between the chassis and platen is correct. Because the chassis and platen (or other parts) have to be removed to replace the ink absorber, head-to-paper distance may be misaligned. Check the print result with the following procedures to confirm that there is no problem.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com 8. PRODUCT TECHNICAL INFORMATION 8-1. FAQ (Problems specific to the iP6210, and their corrective actions) No. 1 * A Function Phenomenon Possible Call / Claim Corrective action Installation Carriage error (Alarm and Power - The LEDs blink alternately in orange Remove the packing material fixing the and green, 2 times (carriage error). carriage. LEDs blink alternately 2 times).
(8-1. FAQ (Problems specific to the iP6210 and corrective actions) cont’d) Download Service Manual And Resetter Printer at http://printer1.blogspot.com No. 9 * B 10 Function Image quality Phenomenon Smearing on printed side. Possible Call / Claim - Smear on the printed side of paper - Cannot print properly - Paper edge crease Corrective action 1. Correct the paper curl. 2. Set the paper thickness lever to the right. 3. Recommend the user to conduct printing in the print quality assurance area. 1.
8-2. Major Functions (1) New Direct Print function - Red eye correction: The red eyes area is selected from an image, and the red eyes are detected automatically. Correction is made at the detected area. - Memory card writing function: From the Menu, Setting of Read only (writing is not possible) and Read_Write (writing is possible.) is possible. 1) Print results is red-tinged. -> Change the correction value. (Shift to Y side.) 1) Direct Print is not possible.
- When a once-used ink cartridge is installed, the actual remaining ink level is not detected, and an error indicating the remaining ink amount is unknown occurs. Pressing the OK button will clear the error, and printing can be done. However, the function to detect the remaining ink amount is disabled (ink status is not displayed). e.g.: An ink cartridge was once used in another printer. A current ink cartridge is removed from the printer.
E: F: G: H: I: J: K: L: O: P: W: X: Alignment of photo black small nozzles in bi-directional printing Alignment of cyan small nozzles in bi-directional printing Alignment of magenta small nozzles in bi-directional printing Alignment of yellow small nozzles in bi-directional printing Alignment of photo cyan nozzles in bi-directional printing Alignment of photo magenta nozzles in bi-directional printing Alignment of photo cyan small nozzles in bi-directional printing Alignment of photo magenta small nozzles
APPENDIX 1: SHIPMENT INSPECTION PATTERN 1 On the service test print (sample below), confirm the EEPROM information as shown below. (The information is given in the upper portion of the printout.) Destination (model name) Rom version USB serial number Ink absorber waste ink amount (%) Reserved for factory use Pxxxxx xxx Vx.xx USB(xxxxxx) Dd=xxx.x FA=xx xx xx On the service test print(sample below),confirm the following items.
APPENDIX 2: EEPROM INFORMATION PRINT Print sample: iP6210D KOR V1.00 IF(USB2=1) D=008.0 Ds 000.
18: Bluetooth-supported device connection record 19: Longest period of non-printing 20: Number of all pages fed 21: Number of pages fed from ASF (total, plain paper, High Resolution Paper, Matte Photo Paper, Photo Paper Pro, Photo Paper Plus Glossy & Photo Paper Plus Semi-gloss, Glossy Photo Paper, postcard, envelope) 22: Camera Direct print pages in total 23: Borderless print pages 24: L & 4x6 print pages 25: Print head temperature 26: Inside temperature 27: Line inspection information 28: Other Photo Pape