Service manual
2) Press and hold the Resume/Cancel button until the Power LED blinks in green the specified number
of times listed in the table below, and release it. The operation starts.
(5) Service mode
Power LED
blinking
Operation Remarks
1 time Print head manual cleaning
2 times Nozzle check pattern printing Set a sheet of plain paper (A4 or letter) in the ASF
or the cassette (according to the Paper Feed
switch setting).
3 times Paper feed roller cleaning
4 times Automatic print head alignment Set a sheet of plain paper (A4 or letter) in the ASF.
5 times Bottom plate cleaning Fold a sheet of plain paper (A4 or letter) in half
crosswise, then unfold and set it in the ASF with
the folded ridge facing down.
6 times Unspecified
7 times The widest head-to-paper
distance setting
8 times or
more
Unspecified
Function Procedures Remarks
Service test print
- Model name
- Destination
- ROM version
- USB serial number
- Waste ink amount
- CD / DVD sensor
correction value
- Ink system function
check result
- CD / DVD sensor
correction result
See "Service mode operation
procedures" below.
Set a sheet of A4 or letter size paper.
For print sample, see 3
-4. Verification
Items, (1) Service test print, <Service
test print sample>.
EEPROM initialization See "Service mode operation
procedures" below.
The following items are NOT
initialized, and the shipment arrival
flag is not on:
- USB serial number
- Destination settings
- Waste ink counter
- CD / DVD correction value
Waste ink counter
reset
See "Service mode operation
procedures" below.
If the waste ink amount is 7% or more,
replace the ink absorber kit.
Destination settings
See "Service mode operation
procedures" below.
1-25