User Manual

5
4
3
2
1
1
The paper is saddle folded
with a maximum of 5 sheets
seipoCslanigirO
#
IMPORTANT
•
Saddle folding is available only if Booklet Finisher-A1 is attached.
•
The paper is saddle folded with a maximum of 5 sheets (80 g/m
2
/ 20 lb Bond)
and then output.
#
NOTE
•
You cannot saddle fold tracing paper, transparencies, prepunched paper, tab paper
1, tab paper 2, labels, or envelopes.
•
The paper sizes that can be saddle folded are:
330 × 483 mm, 320 × 450 mm (SRA3), 305 × 457 mm, A3, B4, A4R, custom
size (210.0 × 279.3 mm to 297.0 × 487.7 mm) or custom size (297.1 × 279.3 mm
to 330.2 × 487.7 mm).
13" × 19", 12 5/8" × 17 11/16", 12" × 18", 11" × 17", LGL, LTRR, custom size
(8 1/4" × 11" to 11 3/4" × 19 1/4"), or custom size (11 3/4" × 11" to 13" × 19
1/4").
Trimming
Trimming allows you to trim the edges of the printed sheets.
The following are paper sizes that can be output to the output trays of the machine.
However, some paper sizes may not be output, depending on the set functions.
#
IMPORTANT
•
Trimming is available only if Inner Booklet Trimmer-A1 is attached to Booklet
Finisher-A1.
•
You cannot trim heavy paper (210 to 300 g/m
2
/ 111 lb index to 110 lb cover ),
textured paper, coated paper (210 to 300 g/m
2
/ 111 lb index to 110 lb cover),
tracing paper, transparencies, prepunched paper, tab 1, tab 2, labels, or envelopes.
Chapter 2 - Main parts 43
Stacker/stapler and integrated punch unit