Operator`s manual

#
WARNING
•
Make sure that the power plug is firmly inserted into the power outlet after
cleaning the machine. Do not use the machine while the connection is loose,
as doing so may cause a fire.
•
Check the power cord and power plug regularly. If the following conditions
occur, contact your local authorized dealer, as the condition may cause a fire:
- There are burn marks on the power plug.
- The blade on the power plug is deformed or broken.
- The power goes OFF and ON when the power cord is bent.
- There are cuts, cracks, or indentations on the power cord.
- A part of the power cord becomes hot.
•
Check the power cord and power plug regularly to make sure that they are
not handled in the following manner, as this may result in a fire or electrical
shock:
- The connection part of the power plug is loose.
- Stress is being applied to the power cord by a heavy object or by affixing it
with staples.
- The power plug is loose.
- The power cord is tied in a bundle.
- The power cord protrudes into a walkway.
- The power cord is in front of a heater.
Chapter 4 - Important safety instructions22
Maintenance and inspections