Operation Manual

Clean the automatic document feeder (ADF)
Introduction
If originals that have been fed through the feeder have streaks or appear dirty, clean the
feeder’s scanning area.
#
IMPORTANT
•
Do not dampen the cloth too much, as this may damage the original or break the
machine.
•
If the document feed scanning area is dirty, documents may not be scanned
clearly, and the size of the document may not be detected correctly.
#
NOTE
This procedure is necessary only if Duplex Color Image Reader Unit-A1 is attached.
Clean the ADF
1.
Open the feeder.
Chapter 11 - Maintenance and calibration348
Clean the automatic document feeder (ADF)