Operation Manual

#
IMPORTANT
•
If you fasten the blue screws without pressing the outer size change plate toward
you, the plate may be fixed at an angle.
•
If you use the paper deck with a tilted outer size change plate, paper may feed
slanted, poor print quality may result, and paper jams may occur. Therefore, make
sure to fasten the blue screw while pressing the outer size change plate towards
you.
9.
Align the rear edge retainer with the marks for the desired paper size.
A4
LTR
B5
#
IMPORTANT
•
If the rear edge retainer is not aligned properly, paper may become jammed, the
quality of the image may be degraded, or the inside of the main unit may become
dirty.
•
Make sure to load paper with the rear edge retainer properly aligned with the paper
size marks on the top and base of the pod deck lite.
10.
Fix the rear edge retainer with the blue screw using a coin or something similar.
•
Fix the screws by turning them clockwise.
Chapter 9 - Paper, toner, and staples266
Adjust the media size for the bulk paper module