Operation Manual

Combine subsets into 1 document
Introduction
A subset is an original you want to copy. A subset can be a single sheet or a full document.
Each subset can require different settings for the original and the output. To create 1
document from several subsets, you can use the Combined copy job template in the
'Copy/Scan' section. You also need this template when you want to use tab sheets to split
up the subsets. Then each tab sheet is also considered to be a subset.
After you created 1 document, you can still add, insert, delete or edit a subset.
How to combine subsets into 1 document
1.
Place the first subset face up into the ADF.
2.
Touch 'Jobs' -> 'Copy/Scan' -> 'Combined copy job'.
3.
Define the settings for the subset (both in the 'Original' and 'Output' section).
4.
Press .
5.
Place the next subset face up into the ADF.
6.
Repeat the steps 3-4 for all subsequent subsets.
7.
Touch 'Ready' after you scanned the last subset.
8.
Touch to start the copy job or touch 'Edit' to check the document first or to add, insert
or delete a subset.
Chapter 7 - Copy jobs202
Combine subsets into 1 document