Operation Manual

'Output' settings - 'Print delivery'
#
DescriptionValuesSetting
Select the output location for the job. Depending on
the settings for your print job, the machine automati-
cally suggests the preferred output location for your
job. However, you can manually overrule this sugges-
tion.
•
'Stacker/stapler upper tray'
Deliver the prints at the upper tray of the stack-
er/stapler.
•
'Stacker/stapler lower tray'
Deliver the prints at the lower tray of the stack-
er/stapler.
•
'Stacker/stapler booklet tray'
Deliver the prints at the booklet tray of the stack-
er/stapler.
•
'Folder main tray'
Deliver the folded prints to the tray at the bottom
of the folder.
'Output loca-
tion'
'Print deliv-
ery'
'By page'
The output is sorted by page.
'By set'
The output is sorted by set.
'Sort'
This setting is only available when the 'Offset stacking'
setting is set to 'Sets (as in job)' in the workflow pro-
file.
'On'
Each set delivered to an output location will have a
small shift on top of the previous set. This makes it
easier to recognize individual sets.
'Off'
All the sets or jobs that get to an output location are
stacked in a straight stack.
'Offset stack-
ing'
Chapter 7 - Copy jobs184
Description of the copy job settings