Operation Manual

Stop the printer
Introduction
The printer can be stopped in 2 ways.
Manually
Use the Stop button or the 'Stop after job' button to stop the printer.
Automatically
Define a corresponding setting in the workflow profiles.
Stop the printer manually
Manual stop#
DescriptionPress the but-
ton
Stop after
The printer stops when the currently printed set
of the active print job is completed.
It depends on the set size and the moment you
press the 'Stop' button when the printer will stop.
For example, when you have a large set of 1,000
pages and you press the 'Stop' button after the first
page, the printing will continue for a couple of
minutes.
one timeA set
NOTE
When you press the 'Stop' button one time, the dashboard will immediately display
a 'Resume' button with a vertical, orange bar. However, the printing continues until
the current set is completed. You must touch the 'Resume' button to resume printing.
The printer stops when the printer buffer is empty
(as soon as possible).
The buffer can contain up to 50 pages. Because
the printer stops when the buffer is empty, it is
possible that the last printed set is not complete.
two timesA page
NOTE
When you press the 'Stop' button two times, the dashboard will immediately display
a 'Resume' button with a vertical, red bar. However, the printing continues until the
buffer is empty. You must touch the 'Resume' button to resume printing.
Chapter 6 - Print jobs126
Stop the printer