Operation Manual

228
External 2/3 Hole Puncher-A1 (Optional)
If a paper jam occurs inside the puncher, a screen prompting you to remove the jammed paper appears on the touch panel
display. Check the location of the paper jam, and follow the procedure described below, while referring to the directions that
appear on the touch panel display, to remove the jammed paper.
The External 2/3 Hole Puncher-A1 is an optional product.
1
Open the front cover of the puncher waste tray.
2
Set the green knob to the  xed position.
If the Document Insertion/Folding Unit-G1 or Document Insertion Unit-J1 is attached, open the
insertion unit.