Operation Guide

189
Troubleshooting
Q&A
29
Can I print on the reverse side of
the preprinted paper?
You can use [2nd Side of 2-Sided
Page] for the multi-purpose tray to
print on paper already printed on.
■
Setting procedure:
1. Load the paper in the multi-purpose tray
with the side to print on face down.
2. Select the paper size  press [Next].
3. Select the paper type  press [2nd Side
of 2-Sided Page]  [OK].
4. Press [OK].
5. Press
(Start).
Additional Information
A paper jam is more likely to occur with
paper already printed on compared to new
paper.
30
Can I output paper to a different
tray according to the function?
You can set the output tray for
each function and set priorities for
outputting paper.
* The output trays indicated by Tray A, B, and C
di er according to the optional product attached
to the machine.
■
Setting procedure:
1. Press (Settings/Registration).
2. Press [Function Settings]  [Common] 
[Paper Output Settings].
3. Press [Output Tray Settings].
4. Set the function and tray priority for Tray
A, B, and C  press [OK].
Additional Information
For more information on setting the output
tray for each function, see e-Manual >
Settings/Registration.