User Manual
140
Inner Finisher-F1 (Optional)
Check the location of the staple jam, and follow the procedure described below, while referring to the directions that
appear on the touch panel display, to remove the jammed staples.
Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
The Inner Finisher-F1is an optional product.
1
1
Remove any jammed paper protruding from the output tray.
2
2
Pull out the staple case.
2
1
1.■ Open■the■front■cover■of■the■
nisher.
2.■ Pull■out■the■staple■case,■
holding■it■by■the■green■tab.
3
3
Remove any staples jammed in the staple case.
1
3
2
1.■ Push■down■the■tab■on■the■
staple■case.
2.■ Remove■all■of■the■staples■
that■slide■from■the■staple■
cartridge.
3.■ Return■the■tab■on■the■staple■
case■to■its■original■position.