User Manual
77
Do not install the machine in unstable locations,
such as unsteady platforms or inclined oors, or
in locations subject to excessive vibrations, as
this may cause the machine to fall or tip over,
resulting in personal injury.
Power supply
Do not damage or modify the power cord. Also, •
do not place heavy objects on the power cord,
or pull on or excessively bend it, as this could
cause electrical damage and result in a re or
electrical shock.
Keep the power cord away from a heat source; •
failure to do this may cause the power cord
coating to melt, resulting in a re or electrical
shock.
Do not connect or disconnect the power cord •
with wet hands, as this may result in electrical
shock.
Do not connect the power cord to a multiplug •
power strip, as this may cause a re or electrical
shock.
Do not bundle up or tie the power cord in a •
knot, as this may result in a re or electrical
shock.
Insert the power plug completely into the •
power outlet, as failure to do so may result in a
re or electrical shock.
Do not use power cords other than the power •
cord provided, as this may result in a re or
electrical shock.
As a general rule, do not use extension cords. •
Using an extension cord may result in a re or
electrical shock.
Do not use power supplies with voltages other •
than those specied herein, as this may result
in a re or electrical shock.
Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the machine. As these
instructions are intended to prevent injury to the user or other persons or destruction of property,
always pay attention to these instructions. Also, since it may result in unexpected accidents or injuries,
do not perform any operation unless otherwise specied in the manual. Improper operation or use of
this machine could result in personal injury and/or damage requiring extensive repair that may not be
covered under your Limited Warranty.
Installation
Never block the ventilation slots and louvers on •
the machine. These openings are provided for
proper ventilation of working parts inside the
machine. Blocking these openings can cause
the machine to overheat. Never place the
machine on a soft surface, such as a sofa or rug.
Do not install the machine in the following •
locations:
A damp or dusty location -
A location near water faucets or water -
A location exposed to direct sunlight -
A location subject to high temperatures -
A location near open ames -
Do not install the machine near alcohol, paint •
thinner, or other ammable substances. If
ammable substances come into contact with
electrical parts inside the machine, it may
result in a re or electrical shock.
Do not place the following items on the •
machine. If these items come into contact with
a high-voltage area inside the machine, it may
result in a re or electrical shock.
If these items are dropped or spilled inside the
machine, immediately turn OFF the main power
switch, and disconnect the power cord from the
power outlet. Then, contact your local
authorized Canon dealer.
Necklaces and other metal objects -
Cups, vases, owerpots, and other containers -
lled with water or liquids