User Manual

28
Using the Setup Guide to Congure the Machine
When the power is turned ON for the rst time after installing the machine, the Setup Guide screen is
displayed.
It is recommended that you follow the instructions that appear on the touch panel display to congure
the machine.
You must restart the machine after conguring the settings with the Setup Guide.
Starting the Setup Guide01
The screen displayed after installing the
machine and turning it ON for the rst time is
the Setup Guide screen.
Conguring the Touch Panel Display’s 02
Language and Keyboard Layout
Set the language and keyboard layout  press
[OK].
Mixing the Toner03
Press [Start].
After the toner nishes mixing, press [OK].
Registering the Paper That You Are 04
Going to Load
1. Select the paper source that you want to
load the paper type for  press [Set].
You can select the desired envelope type by •
pressing [Envelope].
In addition, you can enter the paper size by •
pressing [Custom Size].
Instead of entering values, you can also •
select a button ([S1] to [S4]) containing a
stored paper size setting.
2. Select the paper type  press [OK].
If you select [Plain], you can select the paper
weight from [Plain Paper Weight Set.].
You can select the paper type from the simple
or detailed setting screen. For paper types that
are not displayed on the simple setting screen,
press [Detailed Settings]  select the paper
type from the detailed setting screen.
