imagePROGRAF TM-305 series (PDF) User Manual (Windows)

Automatic Banding Adjustment
If printed images are affected by banding in different colors across the sheet, execute Adjust print quality
for automatic adjustment of the paper feed amount.
The printer prints and reads a test pattern for automatic adjustment of the feed amount.
Important
• When using highly transparent media, use manual adjustment.
Manual Banding Adjustment
Note
• We recommend executing the adjustment if you have changed the paper type or paper size.
• Always check the Set priority values.
Selecting Feed Amount Adjustment Method
• If additional fine-tuning is necessary, execute Paper feed fine adjustment.
Fine-Tuning Paper Feed Amount
• Use Adjust feed length to ensure that lines in CAD drawings are printed at exactly the right length.
Adjusting Line Length
• This may take some time, depending on the type of paper.
Items to Prepare
When Using Rolls An unused roll at least 254.0 mm (10.00 in) wide
When Using Sheets One sheet of unused paper of at least A4/Letter size
Follow the procedure below to adjust.
1.
Load paper.
Loading Rolls on the Roll Holder
Loading Rolls in the Printer
Loading Sheets in the Printer
2. On the HOME screen, tap (Setup).
Menu Operations
3. Tap Maintenance.
4.
Tap Paper feed adjustment.
5. Tap Adjust print quality.
6. Tap Auto.
385