User Manual

Version 1.04

Display:

The Presets displayed on the function pages can be limited to remove unused Presets from

the list. The Preset itself is not deleted, so can be used later if required. To change which

Presets are displayed, select the Preset to highlight it, then select the on/off under the

“Display” heading to change its setting. Please note the Default Preset must have Display =

On.

User/Global:

This defines which users will see the Preset when User Accounts have been enabled.

Fixed = Factory Presets that cannot be deleted. They can be hidden from the function

screens by setting Display = Off.

Global = A Preset that is visible to all users if Display = On.

User = A Preset that can only be seen by the user who created it.

Copy a Preset (Make a new Preset):

To make a new Preset, you must start by copying an existing one. Copy a “Color”,

“Greyscale” or “B&W” Preset depending on the color mode for the new Preset.

Select the Preset to highlight the Preset you wish to copy. Select the Copy button, and a new

Preset will appear with the same name as the original Preset with a number at the end, but

you can edit the name as required.

E.g. “Color Lines (1)” and “My NEW color Preset”.

Delete a Preset:

Select the Preset to highlight the Preset you wish to delete. Select the Delete button, and

the Preset will be deleted.

o You cannot recover a deleted Preset.

o You cannot delete a Fixed Preset.